![](/images/new-backgrounds/1059589/5958947x1.webp)
Self-Clean Cycle
To start the Self-Clean cycle:
1.Close the door completely.
2.Turn the oven selector knob clockwise to the “SELF CLEAN” mode.
3.Turn the temperature control knob past the clean setting until the knob stops. At this time, the clean indicator light will come on. Within 30 seconds, the automatic door latch engages and the oven indicator light comes on. The oven indicator light will remain ON until the oven reaches the
4.The
Note: A fan noise will be heard during the
5.When the cycle is completed, turn both the oven selector and temperature control knob to the “OFF” position. When the oven has completely cooled, open door and remove any ash from the oven surfaces with a damp cloth.
To stop the Self-Clean cycle:
To cancel or interrupt the
Product Care
Replacing Oven Lights
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or circuit breaker before replacing bulb.
WARNING
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
Halogen Lights
1.Unsnap glass light cover using a screwdriver in the access groove.
2.Firmly grasp light bulb and
pull out.
3. Replace with halogen bulb using volt and wattage requirements listed on glass cover.
4. Replace the light cover by snapping glass cover onto metal box.
5. Reconnect power at the main fuse or circuit breaker.
Power Failure
DO NOT attempt to use during a power failure. Unit will not function.
Product Care
46 | 47 |