Breville Complete Guide to Cleaning Your Hemisphere Control Blender

CARE & CLEANING

DISASSEMBLING YOUR BLENDER FOR CLEANING

Step 1.

Always ensure the Breville Hemisphere™ Control Blender is off by pressing the ‘Power’ button on the control panel. Then unplug the power cord.

Step 2.

Remove the blender jug from the motor base by grasping the handle and lifting the jug in an upward direction.

Step 3.

Remove the lid and wash as per care and cleaning instructions.

REASSEMBLING YOUR BLENDER JUG AFTER CLEANING.

Ensure all parts are clean and completely dry thoroughly before placing blender jug onto blender base.

CLEANING THE MOTOR BASE

Wipe the motor base with a soft, damp cloth then dry thoroughly.

Wipe any excess food particles from the power cord.

NOTE

Do not use abrasive scouring pads or cleaners when cleaning the motor base as they may scratch the surface.

CLEANING THE BLENDER JUG, LID, AND INNER MEASURING LID

Wash all parts in warm soapy water with a soft cloth. Use a brush to dislodge stubborn foods. Rinse and dry thoroughly.

NOTE

Periodically, run a cycle with the jar filled L with warm soapy water to help clean in between the gaskets/washers of the blade assembly as fruit juices can get in and act somewhat like an adhesive which would make the blades difficult to turn and therefore put extra pressure and resistance on the motor.

NOTE

Blades are sharp please use care when cleaning around the blades.

When cleaning the blender jug it is always a good idea to clean immediately after use to avoid food sticking to the blades and jug. Place 1-2 cups of warm soapy water into the jug with the lid on and inner lid in place and blend for 5-10 seconds on a low speed which will help clean the blades and jug. Then rinse jug in cold water and dry thoroughly.

The blender lid may be washed in the dishwasher on the top shelf only and on a standard wash cycle. The blender jug may be placed in the bottom shelf of the dishwasher on a standard cycle only.

20