KitchenAid W10322940A Refrigerator USE, Opening and Closing Doors, Using the Controls

Page 8

REFRIGERATOR USE

Opening and Closing Doors

There are two refrigerator compartment doors. The doors can be opened and closed either separately or together.

There is a vertically-hinged seal on the left refrigerator door.

■When the left side door is opened, the hinged seal automatically folds inward so that it is out of the way.

■When both doors are closed, the hinged seal automatically forms a seal between the two doors.

A

A. Hinged seal

Using the Controls

The refrigerator and freezer controls are located on the dispenser panel and display screen.

Cooling On/Off

To turn cooling off, press and hold the TEMP button on the dispenser panel for 3 seconds. Your refrigerator and freezer will not cool when cooling is off.

To turn cooling back on, press and hold the TEMP button for 3 seconds again.

Temperature Controls

For your convenience, your refrigerator and freezer controls are preset at the factory.

To view set points, press the TEMP button on the dispenser panel. The factory recommended set points are 0°F (-18°C) for the freezer and 38°F (3°C) for the refrigerator.

IMPORTANT:

■Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the set points to a higher (colder) than recommended setting will not cool the compartments any faster.

■The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

■Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.

■The display screen on the dispenser control panel has a backlight, which will turn off automatically when the controls have not been used for 2 minutes or more. When the backlight is off, the first press of a control button or the display screen will only reactivate the backlight, without changing any settings. Within 2 minutes after the backlight has been reactivated, additional presses of control buttons or the display screen will change the applicable settings.

Display screen

Language Preference

The language of the text on the display screen can be set to English, Spanish or French.

■To change the display screen text from English to Spanish or French, press the HOME button on the dispenser panel. On the display screen, press OPTIONS, then PREFERENCES, then LANGUAGE. Select ESPAÑOL (Spanish) or FRANÇAIS (French), wait 15 seconds or press BACK, and the screen text will be changed.

■To change the display screen text from Spanish to English, press the HOME button on the dispenser panel. On the display screen, press OPCIONES, then PREFERENCIAS, then IDIOMA. Select INGLÉS, wait 15 seconds or press ATRÁS, and the screen text will be changed.

■To change the display screen text from French to English, press the HOME button on the dispenser panel. On the display screen, press OPTIONS, then PRÉFÉRENCES, then LANGUE. Select ANGLAIS, wait 15 seconds or press RETOUR, and the screen text will be changed.

Door Ajar Alarm

The Door Ajar Alarm feature sounds an alarm when the refrigerator or freezer door is open for 5 minutes and the product cooling is turned on. The alarm will repeat every 2 minutes.

■Close both doors to turn it off. The feature then resets and will reactivate when either door is left open again for 5 minutes.

■If you need to keep the doors open and wish to silence the alarm for up to 5 minutes, press SNOOZE on the display screen.

■If you need to keep the doors open and wish to silence the alarm for longer than 5 minutes, press RESET on the display screen. The alarm will remain off until both doors are closed, then will reactivate when either door is left open again for

5 minutes.

Adjusting the Controls

To adjust the set points, press the TEMP button on the dispenser panel. Set points and adjusting information will appear on the display screen.

Refrigerator Controls

Make sure REFRIGERATOR is selected. The up and down arrows on the display screen allow you to adjust the refrigerator compartment temperature. The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C).

■Press the down arrow to lower the set point.

■Press the up arrow to raise the set point.

NOTE: To view Celsius temperatures, press UNITS. To return the display setting to Fahrenheit, press UNITS again.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Clean Before UsingUnpack the Refrigerator Remove the PackagingRecommended Grounding Method Location RequirementsElectrical Requirements Water Supply Requirements Connect the Water SupplyWater Pressure Reverse Osmosis Water SupplyComplete the Installation Refrigerator Doors and DrawerConnect to Refrigerator Remove and Replace HandlesAdjust the Doors Replace Doors and HingesRemove and Replace Freezer Drawer Final StepsDrawer Front Removal Drawer Front Replacement Opening and Closing Doors Using the ControlsRefrigerator USE Features PhotosUSB Port Upload Photos to the DisplayTimer SettingsSlideshow MeasurementCrisper Humidity Control Water and Ice DispensersOptions To Dispense Water Measured Fill Water DispenserPower Outage Indicator on some models Pull-out TrayIce Dispenser To Dispense IceWater Filtration System Ice Maker and Storage BinWater Filter Status Light Changing the Light Bulb CleaningRefrigerator Care Troubleshooting Refrigerator OperationTemperature and Moisture Water Filter Certifications Water and ice dispenser will not operate properlyWater is leaking from the dispenser system Water from the dispenser is warmPerformance Data Sheet Application Guidelines/Water Supply ParametersKitchenaid Refrigerator Warranty Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Méthode recommandée de mise à la terre Spécifications électriquesSpécifications de l’alimentation en eau Pression de leauAchever l’installation Raccordement de la canalisation deauRaccordement à une canalisation d’eau Raccordement au réfrigérateurEnlèvement et réinstallation des poignées Réinstallation des portes et des charnièresRetirer et réinstaller le tiroir du congélateur Portes et tiroir du réfrigérateurAjustement des portes Étapes finalesEnlèvement et réinstallation de la porte Ouverture et fermeture des portes Utilisation des commandesUtilisation DU Réfrigérateur Ajustement des commandes CaractéristiquesPort USB Télécharger des photos vers laffichageEffacer les photos de laffichage DiaporamaMesure Options VerrouillageRéglage de lhumidité dans le bac à légumes Distributeurs d’eau et de glaçonsVolumes préréglés Distribution deau remplissage mesuréPlateau coulissant Le distributeur de glaçonsMachine à glaçons et bac d’entreposage Remplacement du filtre à eau Témoin lumineux de l’état du filtre à eauSystème de filtration de leau Taux de production de glaçonsNettoyage Remplacement de l’ampoule d’éclairageEntretien DU Réfrigérateur Dépannage Fonctionnement du réfrigérateurTempérature et humidité La température est trop élevéeLa température est trop basse dans le réfrigérateur Il y a une accumulation dhumidité à lintérieurLeau du distributeur est tiède Goût, odeur ou couleur grise des glaçons’eau coule du système de distribution Feuille DE Données SUR LA Performance Système de filtration d’eau intérieurKitchenaid Refrigerator Warranty W10322940A SP PN W10322941A All rights reserved
Top Page Image Contents