KitchenAid KBRA20ELBL0, KBLA20ELSS0 Refrigerator Installation, Unpacking, Location Requirements

Page 4

REFRIGERATOR

INSTALLATION

Unpacking

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Removing packaging materials

Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see the “Refrigerator Safety” section.

On some models, shelves, bins, door shelf rails, and other feature parts may be packaged in the Interior FeaturePak. Follow the instructions contained in the package for proper assembly.

Depending on your model, to remove the protective (transparent) film that is on the nameplate, which is located on the freezer handle, use your fingernail and peel off the film, starting from one side and peeling to the other.

IMPORTANT: Do not remove the white foam air return insert that is located behind the control panel on the ceiling of the refrigerator (on some models). The insert is part of the refrigerator and not part of the packing material. If the insert is removed, ice may migrate down from the freezer and cause icicles to form.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Cleaning before use

After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in the “Refrigerator Care” section.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when re- moving them to avoid impact from dropping.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

Your refrigerator does not require clearance on the top, back, or sides, but many factors such as subflooring or floor covering may affect your installation opening. Measure carefully.

If you are installing your refrigerator next to a fixed wall, leave 2¹⁄₈ in. (5.4 cm) minimum on each side (depending on your model) to allow for the door to swing open.

21/8" (5.4 cm)

If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).

4

Image 4
Contents BOTTOM-MOUNT Refrigerator Réfrigérateur SuperposéUse & Care Guide Guide d’utilisation et d’entretienTable of Contents Table DES MatièresRefrigerator Safety Before you throw away your old refrigerator or freezerRefrigerator Installation Cleaning before useUnpacking Location RequirementsConnecting to Water Line Electrical RequirementsWater Supply Connection Recommended grounding methodConnecting to Refrigerator Base GrilleRemoving the base grille Replacing the base grilleRefrigerator Doors Door and Hinge Replacement Door Reversal on some Architect Series modelsDoor Reversal Panel Series Final StepsDoor Swing Reversal optional Architect SeriesPanel Series Water System Preparation Door Closing and AlignmentDoor Closing Factory Trim Kit Dimensions for Custom Wood Panels Dimensions for Routing Door Panel Side ViewNormal Sounds 20 cu. ft. Refrigerator doorUsing the Controls Adjusting Control SettingsMid-setting Refrigerator USEInterior Water Filtration System Water DispenserIce Maker Refrigerator Shelves Refrigerator FeaturesMeat Drawer and Cover Freezer Features Crisper and Crisper CoverCrisper Humidity Control Utility or Egg BinDoor Features Ice ShelfDoor Retainer Door BinsRefrigerator Care CleaningChanging the Light Bulb Power Interruptions TroubleshootingVacation and Moving Care Refrigerator seems to make too much noise Ice maker is not producing ice or not enough iceOff-taste, odor or gray color in the ice Water dispenser will not operate properlyAssistance Or Service U.S.AWater Filter Certifications AccessoriesCanada Performance Data Sheets Application Guidelines/Water Supply ParametersKitchenaid Refrigerator Warranty KitchenAid will not pay forPage Sécurité DU Réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurInstallation DU Réfrigérateur Emplacement d’installationDéballage Nettoyage avant l’utilisationMéthode recommandée de mise à la terre Spécifications électriquesRaccordement de la canalisation d’eau Arrivée d’eau froideGrille de la base Raccordement au réfrigérateurPour enlever la grille de la base Pour replacer la grille de la basePortes du réfrigérateur Remplacement de la porte et des charnières Inversion des portes série avec panneaux décoratifsÉtapes finales CaisseInversion du sens douverture des portes option Série ArchitectSérie avec panneaux décoratifs Préparation du système d’eau Fermeture et alignement des portesFermeture des portes Remplacement des panneaux de porte Installation des panneaux personnalisés en boisEnsemble décoratif de l’usine Enlèvement des panneaux de la porteDimensions pour les panneaux en bois personnalisés Dimensions pour lusinage du panneau de porte vue latéraleSons normaux Porte du réfrigérateur de 20 pi cuPour s’assurer d’une circulation d’air Appropriée Utilisation des commandesRéglage moyen Ajustement des réglages de commande Distributeur d’eauSystème de filtration d’eau intérieur Distribution d’eauRemplacement de la cartouche de filtre à eau intérieur Machine à glaçonsTablettes du réfrigérateur Mise en marche/arrêt de la machine à glaçonsBac à légumes et couvercle Tiroir à viande et couverclePaniers de congélateur Réglage de l’humidité dans le bac à LégumesCasier utilitaire ou oeufrier Caractéristiques DE LA Porte Tablette à glaçonsBalconnets dans la porte Dispositif de retenue de la porteRemplacement de l’ampoule d’éclairage Remplacement de lampoule du compartiment de réfrigérationEntretien DU Réfrigérateur NettoyageRemplacement de lampoule du compartiment de congélation Pannes de courantEntretien avant les vacances ou lors d’un Déménagement VacancesDépannage Mauvais goût, odeur ou couleur grise des glaçons Le distributeur d’eau ne fonctionne pas bienLe débit d’eau du distributeur diminue beaucoup ’eau coule du distributeur’eau du distributeur n’est pas assez froide La cloison entre les deux sections est tièdeLa température est trop tiède Il existe une accumulation d’humidité à l’intérieurAssistance OU Service AccessoiresFeuilles DE Données SUR LE Produit Système de filtration d’eau intérieurGarantie DU Réfrigérateur Kitchenaid KitchenAid ne paiera pas pour12642709SP/2225031A All rights reserved

KBRA20ELBL0, KBRA20EMSS, KBLA20ELSS0, KBRA20ELSS0, KBRA20ELWH0 specifications

The KitchenAid KBRA20ELBT0, along with its variants KBRA20ELWH0, KBRA20ELSS0, and KBLA20ELSS0, represents the epitome of modern refrigeration technology in bottom-mount refrigerator design. Combining style, functionality, and innovative features, these models are designed to meet the demands of contemporary kitchens while preserving food freshness and accessibility.

One of the standout features is the spacious interior layout which maximizes storage capacity. The bottom-mount design places the refrigerator section at eye level, allowing for easy access to frequently used items while the freezer section is located beneath. This configuration minimizes bending and stretching, thus enhancing convenience in day-to-day use.

Equipped with the Advanced Cooling System, the KBRA20EL series maintains optimal temperature and humidity levels. The system utilizes a combination of precise cooling technology and active temperature management to ensure that food stays fresher for longer. This technology monitors conditions within the refrigerator to minimize temperature fluctuations, which is critical for preserving perishables.

The installation of the FreshChill Temperature Management System further enhances usability by allowing users to customize the temperature settings for different compartments. Additionally, the Produce Preserver feature helps to extend the life of fruits and vegetables by absorbing ethylene gas, which can hasten spoilage.

These models feature a sleek, stainless steel exterior that not only enhances aesthetic appeal but also provides ease of cleaning. The fingerprint-resistant finish ensures that the surface remains smudge-free, which is particularly important in high-traffic kitchens.

Another valuable characteristic is the LED lighting embedded within the refrigerator compartments. This energy-efficient lighting provides bright and clear visibility, making it easy to locate items even in the back of the shelves.

Additionally, the KBRA20EL series includes multiple adjustable shelves and door bins, allowing for flexible storage solutions. The clear shelves make it easy to spot items, reducing the likelihood of food items being lost in the back of the fridge.

In essence, KitchenAid’s KBRA20ELBT0 and its counterparts showcase a sophisticated blend of advanced technology, user-friendly design, and increased storage capabilities. These bottom-mount refrigerators are an ideal choice for homeowners looking to elevate their kitchen experience while ensuring their food stays fresh and accessible. Whether it's the stylish finishes, innovative cooling technology, or versatile storage options, this series is crafted to meet the modern kitchen's needs and demands.