KitchenAid 2225409 manual Assistance Or Service

Page 21

■Is the water shutoff valve not turned on or the water line connected at the source? Be sure the water shutoff valve is turned on and the water source is connected to the refrigerator. See the “Water Supply Connection"section.

■Is the water shutoff valve clogged or incorrectly installed? See the “Water Supply Connection"section. If clogging or installation is not a problem, call for service or contact a plumber.

■Is there a kink in the home water source line? If you find or suspect a kink in the water line, call for service.

Water flow from the dispenser decreases noticeably

■Is there a water filter installed on the refrigerator? The filter may be full or incorrectly installed. Depending on your model, remove the water filter cartridge (see the "Interior Water Filtration System” section). Operate the dispenser. If the water flow increases noticeably, your filter is full and needs to be replaced.

There is interior moisture buildup

■Are the air vents blocked in the refrigerator? Remove any objects from in front of the air vents. See the “Ensuring Proper Air Circulation” section for air vent locations.

■Are the door(s) opened often? Avoid humidity buildup by getting all items out at one time, keeping food organized, and closing the door as soon as possible.

■Is the room humid? It is normal for moisture to build up inside the refrigerator when the room air is humid.

■Is the food packaged correctly? Check that all food is securely wrapped. Wipe off damp food containers before placing them in the refrigerator.

■Is the control set correctly for the surrounding conditions? See the “Using the Control(s)” section.

■Was a self-defrost cycle completed? It is normal for droplets to form after the refrigerator self-defrosts.

Water leaking from the dispenser

 

The doors are difficult to open

■Is the glass not being held under the water dispenser long enough? Hold the container under the water dispenser two to three seconds after releasing the dispenser lever. Water may continue to dispense during this time.

■Is there a water filter installed on the refrigerator? The water filtration system may have air in the lines, causing water to drip. Additional flushing may help clear air from the lines. Normal dispenser use should flush air from the lines within 24 to 72 hours.

The dispenser water is not cool enough

■Has the refrigerator been newly installed? Allow 24 hours for the refrigerator to cool completely.

■Has a large amount of water been recently dispensed? Allow 24 hours for the water to cool completely.

■Has water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

The divider between the two compartments is warm

The warmth is probably due to normal operation of the automatic exterior moisture control.

Temperature is too warm

■Are the air vents blocked in either compartment? This prevents cold air movement between the compartments. Move objects away from the air vents. See the “Ensuring Proper Air Circulation” section for air vent locations.

■Are the door(s) opened often? The refrigerator will warm when this occurs. Keep the refrigerator cool by getting all items out at one time, keeping food organized, and closing the door as soon as possible.

■Has a large amount of food just been added to the refrigerator or freezer? Adding a large amount of food warms the refrigerator. It can take several hours for the refrigerator to return to the normal temperature.

■Are the controls set correctly for the surrounding conditions? See the “Using the Control(s)” section.

■Are the gaskets dirty or sticky? Clean gaskets and the surface that they touch. Rub a thin coat of paraffin wax on the gaskets following cleaning.

The doors will not close completely

■Are food packages blocking the door open? Rearrange containers so that they fit more tightly.

■Is the ice bin out of position? Push the ice bin in all the way.

■Are the crisper cover, pans, shelves, bins, or baskets out of position? Put these items into their correct positions. See the “Refrigerator Features” section for more information.

■Are the gaskets sticking? Clean gaskets and the surface that they touch. Rub a thin coat of paraffin wax on the gaskets following cleaning.

■Does the refrigerator wobble or seem unstable? Level the refrigerator. See the “Door Closing and Alignment” section.

■Were the doors removed during product installation and not properly replaced? Remove and replace the doors according to the “Refrigerator Doors" section, or call a qualified service technician.

ASSISTANCE

OR SERVICE

Before calling for assistance or service, please check

“Troubleshooting.” It may save you the cost of a service call. If you still need help, follow the instructions below.

When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you only use factory specified replacement parts. Factory specified replacement parts will fit right and work right because they are made with the same precision used to build every new KITCHENAID® appliance.

To locate factory specified replacement parts in your area, call our Customer Interaction Center telephone number or your nearest designated service center.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Réfrigérateur Superposé TOP-MOUNT RefrigeratorUse & Care Guide Guide d’utilisation et d’entretienTable DES Matières Table of ContentsBefore you throw away your old refrigerator or freezer Refrigerator SafetyCleaning before use Refrigerator InstallationUnpacking Location RequirementsElectrical Requirements Connecting to Water LineWater Supply Connection Recommended grounding methodRefrigerator Doors Connecting to RefrigeratorHandle Removal Architect Series Door and Hinge Removal all modelsStandard Door Door and Hinge ReplacementContour Door Final StepsStandard Door Swing Reversal optionalContour Door Swing Reversal optionalArchitect Series Water System Preparation Door Closing and AlignmentDoor Closing Door AlignmentMid-setting Using the ControlsRefrigerator USE Normal SoundsWater Dispenser Adjusting ControlsInterior Water Filtration System Dispensing WaterIce Maker Non-indicator water filter on some modelsReplacing the interior water filter cartridge Turning the ice maker on/offLateral Adjustable Shelf Refrigerator FeaturesRefrigerator Shelves Crispers and Meat DrawersChilled Meat Drawer Wine or Can/Bottle RackCrisper Humidity Control Door Features Freezer FeaturesCleaning Adjustable Utility Compartment & TrayRefrigerator Care Flip-up Door ShelfChanging the Light Bulbs Power InterruptionsVacation and Moving Care If you choose to turn the refrigerator off before you leaveTroubleshooting Assistance Or Service Water Filter Certifications AccessoriesU.S.A CanadaProduct Data Sheets EPAMCL ONE-YEAR Full Warranty on Refrigerator Kitchenaid Refrigerator WarrantyLifetime Limited Warranty on Door Bins and can Racks KitchenAid will not pay forAvant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurEmplacement d’installation Installation DU RéfrigérateurDéballage Nettoyage avant l’utilisationSpécifications électriques Méthode recommandée de mise à la terreRaccordement de la canalisation deau Arrivée d’eau froideRaccordement au réfrigérateur Portes du réfrigérateurEnlèvement de la poignée Série Architect Enlèvement des portes et des charnières tous modèlesCaisse Porte standardPorte du compartiment de congélation Porte du réfrigérateurPorte Contour Remplacement des portes et des charnièresÉtapes finales PortesDémontage et réinstallation de la porte Inversion du sens douverture des portes option Fermeture et alignement des portes Série ArchitectFermeture des portes Préparation du système d’eau Sons normauxAlignement des portes Ajustement des réglages de commande Utilisation des commandesPour s’assurer d’une circulation d’air Appropriée Réglage moyenSystème de filtration d’eau intérieur Distributeur d’eauDistribution d’eau CONDITION/RAISON AjustementMachine à glaçons Remplacement de la cartouche de filtre à eau intérieurMise en marche/arrêt de la machine à glaçons Augmentation du taux de production de glaçonsPour réinstaller la tablette Pour retirer et réinstaller le rail de la tabletteTablettes du réfrigérateur Tablette à réglage latéralEmplacement de la commande d’humidité Tiroirs Pour retirer et réinstaller un tiroirBacs à légumes et tiroirs à viande Réglage de l’humidité dans le bac à LégumesCasier à vin ou porte-cannettes Bouteilles Clayette de congélateurCasier utilitaire ou oeufrier Clayette ajustable demi-largeur Pour congélateurPlancher de congélateur coulissant Caractéristiques DE LA PorteTringles dans la porte Porte-cannettes et balconnetsEntretien DU Réfrigérateur Remplacement des ampoules ’éclairageTablette de porte relevable NettoyageDépannage Pannes de courantEntretien avant les vacances ou lors d’un Déménagement Le moteur semble fonctionner excessivement Le plat de dégivrage contient de l’eauLe réfrigérateur semble faire trop de bruit La machine à glaçons ne produit pas de glaçons ou pas assez’eau coule du distributeur Le débit d’eau du distributeur diminue beaucoupIl existe une accumulation d’humidité à l’intérieur ’eau du distributeur n’est pas assez froideAccessoires Assistance OU ServiceAux États-Unis Au CanadaFeuilles DE Données SUR LE Produit Garantie Complète DE UN AN SUR LE Réfrigérateur Garantie DU Réfrigérateur KitchenaidKitchenAid ne paiera pas pour 2225409

2225409 specifications

The KitchenAid 2225409 is a versatile kitchen appliance that has gained popularity among culinary enthusiasts and home cooks alike. Renowned for its robust design and powerful performance, this model embodies the essence of quality and functionality that KitchenAid is famous for.

One of the standout features of the KitchenAid 2225409 is its powerful motor. Equipped with a high-performance motor, this appliance can handle various tasks with ease, from mixing and kneading dough to whipping cream and blending ingredients. The motor is designed to offer consistent power, ensuring that even the toughest mixtures can be processed smoothly.

The 2225409 also boasts a durable and stylish construction. Its sleek design not only adds aesthetic appeal to any kitchen but also enables easy cleaning and maintenance. The exterior is designed to resist fingerprints and stains, ensuring the appliance maintains its elegant look even with frequent use.

Another significant characteristic is its versatility. The KitchenAid 2225409 comes with a range of attachments, making it suitable for numerous culinary tasks. From pasta makers to food grinders, these attachments expand the machine’s capabilities, allowing users to explore diverse recipes and cooking techniques.

Technological advancements in the KitchenAid 2225409 include a user-friendly control panel. This intuitive interface allows for easy speed adjustments, enabling precise control over mixing textures and ingredient consistency. This feature is particularly beneficial for achieving the perfect dough, meringue, or batter, as users can fine-tune the speed according to their needs.

Safety is also a priority with the KitchenAid 2225409. The appliance is equipped with a tilt-head design, permitting easy access to the mixing bowl, while ensuring stability during operation. Additionally, the locking mechanism helps secure the head in place, adding an extra layer of safety during use.

In conclusion, the KitchenAid 2225409 is a powerful, versatile, and stylish kitchen appliance that excels in functionality and design. With its robust motor, a wide range of attachments, and user-friendly control features, it stands out as an essential tool for both amateur and professional chefs. Whether for baking, cooking, or food preparation, the KitchenAid 2225409 enhances the culinary experience, making cooking more enjoyable and efficient.
Top Page Image Contents