KitchenAid 2225409 manual Refrigerator Installation, Unpacking, Location Requirements

Page 4

REFRIGERATOR

INSTALLATION

Unpacking

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Removing packaging materials

■Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see the “Refrigerator Safety” section.

■On some models, shelves, bins, door shelf rails, and other feature parts may be packaged in the Interior FeaturePak. Follow the instructions contained in the package for proper assembly.

■Depending on your model, to remove the protective (transparent) film that is on the nameplate, which is located on the freezer handle, use your fingernail and peel off the film, starting from one side and peeling to the other.

IMPORTANT: Do not remove the white foam air return insert that is located behind the control panel on the ceiling of the refrigerator (on some models). The insert is part of the refrigerator and not part of the packing material. If the insert is removed, ice may migrate down from the freezer and cause icicles to form.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Cleaning before use

After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in the “Refrigerator Care” section.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when re- moving them to avoid impact from dropping.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂ in. (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2 in. (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).

1/2" (1.25 cm)

2" (5.08 cm)

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents TOP-MOUNT Refrigerator Réfrigérateur SuperposéUse & Care Guide Guide d’utilisation et d’entretienTable of Contents Table DES MatièresRefrigerator Safety Before you throw away your old refrigerator or freezerRefrigerator Installation Cleaning before useUnpacking Location RequirementsConnecting to Water Line Electrical RequirementsWater Supply Connection Recommended grounding methodConnecting to Refrigerator Refrigerator DoorsHandle Removal Architect Series Door and Hinge Removal all modelsDoor and Hinge Replacement Standard DoorContour Door Final StepsDoor Swing Reversal optional StandardDoor Swing Reversal optional ContourArchitect Series Door Closing and Alignment Water System PreparationDoor Closing Door AlignmentUsing the Controls Mid-settingRefrigerator USE Normal SoundsAdjusting Controls Water DispenserInterior Water Filtration System Dispensing WaterNon-indicator water filter on some models Ice MakerReplacing the interior water filter cartridge Turning the ice maker on/offRefrigerator Features Lateral Adjustable ShelfRefrigerator Shelves Crispers and Meat DrawersWine or Can/Bottle Rack Chilled Meat DrawerCrisper Humidity Control Freezer Features Door FeaturesAdjustable Utility Compartment & Tray CleaningRefrigerator Care Flip-up Door ShelfPower Interruptions Changing the Light BulbsVacation and Moving Care If you choose to turn the refrigerator off before you leaveTroubleshooting Assistance Or Service Accessories Water Filter CertificationsU.S.A CanadaEPA Product Data SheetsMCL Kitchenaid Refrigerator Warranty ONE-YEAR Full Warranty on RefrigeratorLifetime Limited Warranty on Door Bins and can Racks KitchenAid will not pay forSécurité DU Réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurInstallation DU Réfrigérateur Emplacement d’installationDéballage Nettoyage avant l’utilisationMéthode recommandée de mise à la terre Spécifications électriquesRaccordement de la canalisation deau Arrivée d’eau froidePortes du réfrigérateur Raccordement au réfrigérateurEnlèvement de la poignée Série Architect Enlèvement des portes et des charnières tous modèlesPorte standard CaissePorte du compartiment de congélation Porte du réfrigérateurRemplacement des portes et des charnières Porte ContourÉtapes finales PortesDémontage et réinstallation de la porte Inversion du sens douverture des portes option Série Architect Fermeture et alignement des portesFermeture des portes Sons normaux Préparation du système d’eauAlignement des portes Utilisation des commandes Ajustement des réglages de commandePour s’assurer d’une circulation d’air Appropriée Réglage moyenDistributeur d’eau Système de filtration d’eau intérieurDistribution d’eau CONDITION/RAISON AjustementRemplacement de la cartouche de filtre à eau intérieur Machine à glaçonsMise en marche/arrêt de la machine à glaçons Augmentation du taux de production de glaçonsPour retirer et réinstaller le rail de la tablette Pour réinstaller la tabletteTablettes du réfrigérateur Tablette à réglage latéralTiroirs Pour retirer et réinstaller un tiroir Emplacement de la commande d’humiditéBacs à légumes et tiroirs à viande Réglage de l’humidité dans le bac à LégumesClayette de congélateur Casier à vin ou porte-cannettes BouteillesCasier utilitaire ou oeufrier Clayette ajustable demi-largeur Pour congélateurCaractéristiques DE LA Porte Plancher de congélateur coulissantTringles dans la porte Porte-cannettes et balconnetsRemplacement des ampoules ’éclairage Entretien DU RéfrigérateurTablette de porte relevable NettoyagePannes de courant DépannageEntretien avant les vacances ou lors d’un Déménagement Le plat de dégivrage contient de l’eau Le moteur semble fonctionner excessivementLe réfrigérateur semble faire trop de bruit La machine à glaçons ne produit pas de glaçons ou pas assezLe débit d’eau du distributeur diminue beaucoup ’eau coule du distributeurIl existe une accumulation d’humidité à l’intérieur ’eau du distributeur n’est pas assez froideAssistance OU Service AccessoiresAux États-Unis Au CanadaFeuilles DE Données SUR LE Produit Garantie DU Réfrigérateur Kitchenaid Garantie Complète DE UN AN SUR LE RéfrigérateurKitchenAid ne paiera pas pour 2225409

2225409 specifications

The KitchenAid 2225409 is a versatile kitchen appliance that has gained popularity among culinary enthusiasts and home cooks alike. Renowned for its robust design and powerful performance, this model embodies the essence of quality and functionality that KitchenAid is famous for.

One of the standout features of the KitchenAid 2225409 is its powerful motor. Equipped with a high-performance motor, this appliance can handle various tasks with ease, from mixing and kneading dough to whipping cream and blending ingredients. The motor is designed to offer consistent power, ensuring that even the toughest mixtures can be processed smoothly.

The 2225409 also boasts a durable and stylish construction. Its sleek design not only adds aesthetic appeal to any kitchen but also enables easy cleaning and maintenance. The exterior is designed to resist fingerprints and stains, ensuring the appliance maintains its elegant look even with frequent use.

Another significant characteristic is its versatility. The KitchenAid 2225409 comes with a range of attachments, making it suitable for numerous culinary tasks. From pasta makers to food grinders, these attachments expand the machine’s capabilities, allowing users to explore diverse recipes and cooking techniques.

Technological advancements in the KitchenAid 2225409 include a user-friendly control panel. This intuitive interface allows for easy speed adjustments, enabling precise control over mixing textures and ingredient consistency. This feature is particularly beneficial for achieving the perfect dough, meringue, or batter, as users can fine-tune the speed according to their needs.

Safety is also a priority with the KitchenAid 2225409. The appliance is equipped with a tilt-head design, permitting easy access to the mixing bowl, while ensuring stability during operation. Additionally, the locking mechanism helps secure the head in place, adding an extra layer of safety during use.

In conclusion, the KitchenAid 2225409 is a powerful, versatile, and stylish kitchen appliance that excels in functionality and design. With its robust motor, a wide range of attachments, and user-friendly control features, it stands out as an essential tool for both amateur and professional chefs. Whether for baking, cooking, or food preparation, the KitchenAid 2225409 enhances the culinary experience, making cooking more enjoyable and efficient.
Top Page Image Contents