Installation Requirements

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■Drill

■1¹⁄₄" (3.2 cm) drill bit

■¹⁄₈" (3.2 mm) drill bit for pilot holes

■Pencil

■Wire stripper or utility knife

■Tape measure or ruler

■Caulking gun and weatherproof caulking compound

■Flat-blade screwdriver

■Phillips screwdriver

For vented installations, you also need:

■Saber or keyhole saw

■Vent clamps

■Metal snips

■Compass or 8" (20.3 cm) circle template

Parts supplied

Remove parts from package. Check that all parts are included.

■2 - Metal filters for 30" (76.2 cm) model

■2 - Metal filters for 36" (91.4 cm) model

■6 - 4.5 x 13 mm mounting screws

■3 - 4 x 8 mm damper screws

■3¹⁄₄" x 10" (8.3 x 25.4 cm) damper/vent connector

■4 - 5 x 45 mm screws

■4 - 8 x 40 mm wall anchors

■Recirculating kit

■Charcoal filters for non-vented (recirculating) installations. See the “Assistance or Service” section to order replacement filters.

Parts needed

■Home power supply cable

■½" (12.7 mm) UL listed or CSA approved strain relief

■3 - UL listed wire connectors

For vented installations:

■3¹⁄₄" x 10" (8.3 x 25.4 cm) or 6" (15.2 cm) or larger round metal venting

■6" (15.2 cm) or larger round damper, if using 6" (15.2 cm) or larger round vent system

■3¹⁄₄" x 10" (8.3 x 25.4 cm) to 6" (15.2 cm) or larger diameter transition piece if using 6" (15.2 cm) or larger diameter round vent system

■1 - wall or roof cap

For cabinets with recessed bottoms:

■2 - 2" (5.1 cm) wide filler strips. Length and thickness determined by recess dimensions.

■4 - flat-head wood screws or machine screws with washers and nuts (to attach filler strips).

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

■It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located inside the range hood on the left wall.

■Range hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

■Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance. Consult the cooktop/range manufacturer installation instructions before making any cutouts.

■Grounded electrical outlet is required. See “Electrical Requirements” section.

■The hood is factory-set for vented installations. For non- vented (recirculating) installations, the Recirculation Kit is included. See the “Assistance or Service” section to order Replacement Charcoal Filters Part Number W10272068.

■All openings in ceiling and wall where range hood will be installed must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local codes.

Product Dimensions

		1³⁄₁₆"
12"		(3.0 cm)
12"
(30.5 cm)
7¹⁄₄"
(18.4 cm)		3" (7.6 cm) -
	⁵⁄₈"	30" (76.2 cm) model
2"	(1.6 cm)	30" (76.2 cm) model
2"		5³⁄₄" (14.6 cm) -
(5.1 cm)		5³⁄₄" (14.6 cm) -
(5.1 cm)		36" (91.4 cm) model
9"		36" (91.4 cm) model
9"
(22.9 cm)
	⁵⁄₈"
	(1.6 cm)

29⁷⁄₈" (75.9 cm) - 30" (76.2 cm) model	19³⁄₄"
29⁷⁄₈" (75.9 cm) - 30" (76.2 cm) model	(50.2 cm)
35⁷⁄₈" (91.1 cm) - 36" (91.4 cm) model

LI3ZGC/W10320581E specifications

The KitchenAid LI3ZGC/W10320581E is a versatile and efficient appliance that enhances the culinary experience for home chefs. With its sleek design and powerful capabilities, this kitchen tool stands out in any kitchen setting. One of the main features is its powerful motor, designed to handle a range of mixing tasks with ease. Whether you are kneading bread dough or whipping cream, the LI3ZGC combines efficiency with performance, ensuring consistent results every time.

One of the key technologies integrated into the KitchenAid LI3ZGC is its advanced planetary mixing action. This innovative system allows the mixing attachment to rotate around the bowl, while also spinning on its own axis. This unique motion ensures that all ingredients are thoroughly mixed, eliminating the need to scrape down the bowl frequently. This feature not only saves time but also enhances the quality of the final product.

Another standout characteristic of the LI3ZGC is its robust construction, designed for durability and longevity. Made from high-quality materials, this appliance can withstand heavy usage, making it ideal for both everyday cooking and special occasions. The sturdy design provides stability during operation, preventing any unwanted movement or slipping.

Additionally, the KitchenAid LI3ZGC/W10320581E comes with various attachments that expand its functionality. These attachments are tailored for specific tasks, such as mixing, whipping, and kneading, allowing users to tackle a wide array of recipes. The ease of switching attachments makes it simple to transition from one culinary task to another, making the cooking process streamlined and enjoyable.

The appliance is also designed with user-friendliness in mind. Intuitive controls and a clear design make it accessible for cooks of all skill levels. The LI3ZGC is not only powerful but also easy to clean, with many components being dishwasher-safe, which contributes to its overall convenience.

In summary, the KitchenAid LI3ZGC/W10320581E is a remarkable kitchen appliance that combines power, efficiency, and durability. With its advanced mixing technology, versatile attachments, and user-friendly design, it is an excellent addition to any kitchen, helping both novice and experienced cooks elevate their culinary creations.