Installation Instructions

Electrical Requirements

Observe all governing codes and ordinances.

Ensure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes and ordinances.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

1 Batterymarch Park

Quincy, MA 02169-7471

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

■A 120 volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.

■If the house has aluminum wiring, follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

■Wire sizes and connections must conform with the rating of the appliance as specified on the model/serial rating plate. The model/serial plate is located behind the filter on the rear wall of the range hood.

■Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22. 1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes and ordinances.

Prepare Location

NOTE: For vented installations, it is recommended that the vent system be installed before hood is installed.

Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

NOTE: The exhaust adapter/damper can be installed up to 1" (2.5 cm) on either side of the hood center to accommodate off-center ductwork.

1.Disconnect power.

2.Determine which venting method to use: roof or wall.

3.Select a flat surface for assembling the range hood. Place covering over that surface.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood.

Failure to do so can result in back or other injury.

4.Using 2 or more people, lift the range hood and set it upside down onto covered surface.

5.If cabinet has recessed bottom, add wood filler strips on each side. Install screws to attach filler strips in locations shown.

Wood filler strips (recessed cabinet bottoms only)

3" (7.6 cm)

Cabinet

bottom

3" (7.6 cm)

Wall

Determine Wiring Hole Location

Cut only one 1¹⁄₄" (3.2 cm) diameter wiring access hole. See Step 2 for wiring hole location instructions.

1.Determine and clearly mark a vertical centerline on the wall and cabinet in the area the vent opening will be made.

A.Centerline

LI3ZGC/W10320581E specifications

The KitchenAid LI3ZGC/W10320581E is a versatile and efficient appliance that enhances the culinary experience for home chefs. With its sleek design and powerful capabilities, this kitchen tool stands out in any kitchen setting. One of the main features is its powerful motor, designed to handle a range of mixing tasks with ease. Whether you are kneading bread dough or whipping cream, the LI3ZGC combines efficiency with performance, ensuring consistent results every time.

One of the key technologies integrated into the KitchenAid LI3ZGC is its advanced planetary mixing action. This innovative system allows the mixing attachment to rotate around the bowl, while also spinning on its own axis. This unique motion ensures that all ingredients are thoroughly mixed, eliminating the need to scrape down the bowl frequently. This feature not only saves time but also enhances the quality of the final product.

Another standout characteristic of the LI3ZGC is its robust construction, designed for durability and longevity. Made from high-quality materials, this appliance can withstand heavy usage, making it ideal for both everyday cooking and special occasions. The sturdy design provides stability during operation, preventing any unwanted movement or slipping.

Additionally, the KitchenAid LI3ZGC/W10320581E comes with various attachments that expand its functionality. These attachments are tailored for specific tasks, such as mixing, whipping, and kneading, allowing users to tackle a wide array of recipes. The ease of switching attachments makes it simple to transition from one culinary task to another, making the cooking process streamlined and enjoyable.

The appliance is also designed with user-friendliness in mind. Intuitive controls and a clear design make it accessible for cooks of all skill levels. The LI3ZGC is not only powerful but also easy to clean, with many components being dishwasher-safe, which contributes to its overall convenience.

In summary, the KitchenAid LI3ZGC/W10320581E is a remarkable kitchen appliance that combines power, efficiency, and durability. With its advanced mixing technology, versatile attachments, and user-friendly design, it is an excellent addition to any kitchen, helping both novice and experienced cooks elevate their culinary creations.