KitchenAid LI3ZGC/W10320581E Wall Venting, To wire through top, To wire through wall

Page 9

2.To wire through top:

Mark a line distance “A” from the left of the centerline on the underside of the cabinet. Mark the point on this line that is 2" (5.1 cm) from back wall. Drill a 1¼" (3.2 cm) diameter hole through the cabinet at this point.

A

2"

(5.1

cm)

from wall,

 

not cabinet

 

frame

Centerline

A. 12" (30.5 cm) for 30" (76.2 cm) models 12¼" (31.1 cm) for 36" (91.4 cm) models

3.To wire through wall:

Mark a line distance “A” from the left of the centerline on the wall. Mark the point on this line that is 1" (2.5 cm) from the bottom of the cabinet. Drill a 1¹⁄₄" (3.2 cm) diameter hole through the rear wall at this point.

1" (2.5 cm)

A

Centerline

A. 12" (30.5 cm) for 30" (76.2 cm) models 12¼" (31.1 cm) for 36" (91.4 cm) models

Style 1 - Cut Openings for 3¼" x 10" (8.3 cm x 25.4 cm) Rectangular Vent System

Roof Venting

To make a 4¹⁄₄" x 10½" (10.8 cm x 26.7 cm) rectangular cutout on the underside of cabinet top and bottom:

1.Mark lines ¹⁄₂" (1.3 cm) and 4³⁄₄" (12.1 cm) from the back wall on the centerline of the underside of cabinet.

2.Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the underside of cabinet.

3.Use saber or keyhole saw to cut a rectangular opening for vent.

4.Repeat steps 1-3 for the underside of the top of the cabinet.

Cabinet cutouts

 

 

*¹⁄₂" (1.3 cm)

*4³⁄₄"

 

5¹/₄"

(12.1 cm)

(13.3 cm)

 

 

 

 

5¹/₄"

 

(13.3 cm)

*From wall, not cabinet frame

Wall Venting

To make a 3¹⁄₂" x 10½" (8.9 cm x 26.7 cm) rectangle in the wall:

1.Make 2 lines by measuring ³⁄₈" (1.0 cm) and 3⁷⁄₈" (9.8 cm) down from underside of cabinet and mark on the centerline on the back wall.

2.Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the wall.

3.Use saber or keyhole saw to cut a rectangular opening in the wall for the vent.

Centerline

Cabinet

front

³⁄₈"

(1.0 cm)

3⁷⁄₈"

(9.8 cm)

5¹⁄₄"

5¹⁄₄"

(13.3 cm)

(13.3 cm)

Style 2 - Cut Openings for 3¼" x 10" (8.3 x 25.4 cm) Rectangular Vent to Round Vent Transition

Roof Venting

To make a 4¹⁄₄" x 10½" (10.8 cm x 26.7 cm) rectangular cutout on the underside of cabinet bottom:

1.Mark lines ¹⁄₂" (1.3 cm) and 4³⁄₄" (12.1 cm) from the back wall on the centerline of the underside of cabinet.

2.Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the underside of cabinet.

3.Use saber or keyhole saw to cut a rectangular opening for vent.

*¹⁄₂" (1.3 cm)

*4³⁄₄"

(12.1 cm) 5¹/₄"

5¹/₄" (13.3 cm)

(13.3 cm)

*From wall, not cabinet frame

To make a circular vent opening on the underside of the cabinet top:

1.Mark a centerline on the underside of the top of cabinet.

2.Mark a line 5" (12.7 cm) from the back wall on the underside of the top of cabinet.

3.Use a compass or a circle template to draw a circle with a diameter that is ¼" (0.64 cm) larger than the vent.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Hotte DE Cuisinière Table DES Matières Table of ContentsYour safety and the safety of others are very important Range Hood SafetyImportant Safety Instructions Installation Requirements Tools and PartsLocation Requirements Cold Weather Installations Installation ClearancesVenting Requirements Makeup AirCm or Larger Round Vent System Calculating Vent System LengthExample vent system ¹⁄₄ x 10 8.3 cm x 25.4 cm Vent SystemDetermine Wiring Hole Location Installation InstructionsElectrical Requirements Prepare LocationTo wire through wall To wire through topWall Venting To make a 3¹⁄₂ x 10½ 8.9 cm x 26.7 cm rectangle in the wallInstall Range Hood Install Vent SystemFor vented installations Remove the vent knockout from the front mounting plate Complete Installation For Vented Installations OnlyMake Electrical Connection Range Hood USE DisplayLight Timer CleaningRange Hood Care Non-Vented Recirculating Installation Filters To Replace Charcoal FilterReplacing a Halogen Lamp Gnd L Neu Wiring DiagramAccessories Assistance or ServiceU.S.A CanadaThis limited warranty does not cover Kitchenaid Ventilation WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreImportantes Instructions DE Sécurité Exigences D’INSTALLATION Exigences d’emplacementOutils et pièces Exigences concernant l’évacuation Installations pour régions à climat froidDistances de dégagement à respecter Air d’appointCalcul de la longueur effective du circuit d’évacuation Méthodes d’évacuationSystème de décharge circulaire de 6 15,2 cm ou plus Exemple de système de déchargeSpécifications électriques Longueur maximale recommandée = 35 pi 10,7 mSystème de décharge de 3¹⁄₄ x 10 8,3 cm x 25,4 cm ComposantPréparation de l’emplacement Instructions D’INSTALLATIONDéterminer l’emplacement du trou de passage du câble Câblage à travers le sommet du placardÉvacuation par le mur Installation de la hotte Installation du système d’évacuationInstallations avec décharge à l’extérieur Retirer les vis et le support arrière Achever l’installation Installations avec décharge à l’extérieur seulementRaccordement électrique Activation et désactivation du signal sonore Tableau de commandeUtilisation DE LA Hotte AffichageÉclairage MinuterieVitesse du ventilateur Nettoyage Entretien DE LA HotteTerre L Neu Schéma DE CâblageAssistance OU Service AccessoiresAu Canada La présente garantie limitée ne couvre pas Garantie DU Système DE Ventilation KitchenaidW10320581E

LI3ZGC/W10320581E specifications

The KitchenAid LI3ZGC/W10320581E is a versatile and efficient appliance that enhances the culinary experience for home chefs. With its sleek design and powerful capabilities, this kitchen tool stands out in any kitchen setting. One of the main features is its powerful motor, designed to handle a range of mixing tasks with ease. Whether you are kneading bread dough or whipping cream, the LI3ZGC combines efficiency with performance, ensuring consistent results every time.

One of the key technologies integrated into the KitchenAid LI3ZGC is its advanced planetary mixing action. This innovative system allows the mixing attachment to rotate around the bowl, while also spinning on its own axis. This unique motion ensures that all ingredients are thoroughly mixed, eliminating the need to scrape down the bowl frequently. This feature not only saves time but also enhances the quality of the final product.

Another standout characteristic of the LI3ZGC is its robust construction, designed for durability and longevity. Made from high-quality materials, this appliance can withstand heavy usage, making it ideal for both everyday cooking and special occasions. The sturdy design provides stability during operation, preventing any unwanted movement or slipping.

Additionally, the KitchenAid LI3ZGC/W10320581E comes with various attachments that expand its functionality. These attachments are tailored for specific tasks, such as mixing, whipping, and kneading, allowing users to tackle a wide array of recipes. The ease of switching attachments makes it simple to transition from one culinary task to another, making the cooking process streamlined and enjoyable.

The appliance is also designed with user-friendliness in mind. Intuitive controls and a clear design make it accessible for cooks of all skill levels. The LI3ZGC is not only powerful but also easy to clean, with many components being dishwasher-safe, which contributes to its overall convenience.

In summary, the KitchenAid LI3ZGC/W10320581E is a remarkable kitchen appliance that combines power, efficiency, and durability. With its advanced mixing technology, versatile attachments, and user-friendly design, it is an excellent addition to any kitchen, helping both novice and experienced cooks elevate their culinary creations.
Top Page Image Contents