KitchenAid Slide-out Vent Hood Electrical requirements, Product dimensions

Page 3

Electrical requirements

Important: Observe all governing codes and ordinances.

It is the customer’s responsibility:

To contact a qualified electrical installer.

To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70

— latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and

C22.2 No. 0-M91 - latest edition** and all local codes and ordinances.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure downdraft vent is properly grounded.

Do not have a fuse in the neutral or ground circuit.

IMPORTANT:

Save Installation instructions for electrical inspector’s use.

A. A 120-volt, 60-Hz, AC-only, 15-ampere fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

B. THE VENT HOOD MUST BE CONNECTED WITH COPPER WIRE ONLY.

C. Wire sizes and connections must conform to the requirements of the National Electrical Code, ANSI/NFPA 70 — latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91

-latest edition** and all local codes and ordinances.

D. A U.L.- or C.S.A.-listed, 1/2" (12.7 mm) conduit connector must be provided at each end of the power supply cable (at the cooktop and at the junction box).

Copies of the standards listed may be obtained from:

*National Fire Protection Association Batterymarch Park

Quincy, Massachusetts 02269

**CSA International

8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575

Product dimensions

30" (76.2 cm) model: 8" (20.3 cm)

36" (91.4 cm) model: 11" (27.9 cm)

FRONT OF

30" (76.2 cm) model: 26" (66.0 cm)

VENT HOOD

36" (91.4 cm) model: 32" (81.3 cm)

4-3/8"

3-1/4"(8.3 cm)

(11.1 cm)

9-1/2"

(24.1 cm)

glass shelf

extends

7" (17.8 cm)

1"

(25.4 mm)

9-1/8"

(23.2 cm)

11"

(27.9 cm)

10"

(25.4 cm)

2-3/8"

(6.0 cm)

2"

(5.1 cm)

8"

1/4"

(20.3 cm)

(6.4 mm)

1-1/4"

1-5/8” (31.8 mm)

(41.3 mm)

5/8" to 2-1/8"

(1.6 cm to 5.4 cm)

2"

(5.1 cm)

1-7/16"

(3.6 cm)

3/8" (9.5 mm)

30" (76.2 cm) model: 13" (33.0 cm)

36" (91.4 cm) model: 16" (40.6 cm)

BACK OF

VENT HOOD

30" (76.2 cm) model: 29-7/8"(75.9 cm)

36" (91.4 cm) model: 35-7/8"(91.1 cm)

66" (167.6 cm) maximum distance from upper cabinet hood mounting surface to floor

24" (61 cm) minimum distance from underside of range hood to cooking surface or countertop

15" (38.1 cm) minimum upper cabinet height

13" (33 cm) upper cabinet depth

3

Image 3
Contents Installation Instructions Use and Care Guide Metal snips Before you start30 76.2 cm model 8 20.3 cm 36 91.4 cm model 11 27.9 cm Product dimensionsVent Hood Must be Connected with Copper Wire only Electrical requirementsMaximum length = 26 ft Wall ventingRoof venting 4 x 10 8.3 cm x 25 cm Vent systemNon-vented recirculating Kit, Part No must be used To wire through top wiring Filter Adjustment screwsFor the Kwvu and Ykwvu model series Mounting bracket ScrewFor GZ or YGZ model series Use and Care InformationAccessories ONE-YEAR Full Warranty Vent System WarrantyRequesting Assistance or Service in U.S.A Requesting Assistance or Service in CanadaOur consultants provide assistance with Information dutilisation Étapes de l’installationPages Panneau avant personnaliséPhillips Vis Volet de réglageNiveau Pince à dénuderAlimentation électrique Dimensions du produitDécharge à travers le toit Conduit de 8,3 x 25 cm 4 x 10 poDécharge dans la pièce recyclage à travers le soffite Ouverture à Axe central Cales de bois27,3 cm 10 3/4 poFond du Montage Placard Hotte Opercules arrachables pour passage du câblageCouvercle de la boîte De connexion Bride dePour modèles des séries Kwvu et Ykwvu Panneau avant personnaliséSurface frontale du panneau 37,3 mm 15/32 po Tableau de Commande couvercle de plastiqueInformation d’utilisation et entretien Pour modèles des séries GZ et YGZAccessoires Garantie Complète DE UN AN Garantie du système de ventilationEt l’indicatif régional 807 en Ontario Demande d’assistance ou de service au CanadaSuccursales de service direct ’exception de l’indicatif régional

Slide-out Vent Hood specifications

The KitchenAid Slide-out Vent Hood offers an innovative solution to maintaining a clean and comfortable kitchen environment. Designed to seamlessly blend into cabinetry, this vent hood provides functionality without compromising aesthetics. Its slide-out feature allows for easy access and efficient ventilation whenever cooking activities heat up, and it can be conveniently tucked away when not in use, preserving the sleek lines of your kitchen design.

One of the main features of the KitchenAid Slide-out Vent Hood is its powerful ventilation system, which effectively captures smoke, steam, and odors, ensuring that your kitchen remains fresh and free from airborne particles. With multiple fan speeds, users can easily adjust the airflow according to their cooking needs. The high-performance blower efficiently moves air, making it suitable for various cooking methods, from gentle simmering to high-heat frying.

In addition to its robust ventilation, this slide-out vent hood is equipped with bright, energy-efficient LED lighting. These lights illuminate the cooking surface below, enhancing visibility and ensuring that every culinary task is well-lit. The LEDs are not only long-lasting but also consume less energy, helping to reduce electricity bills while providing excellent illumination.

The KitchenAid Slide-out Vent Hood features a stainless steel construction, which is not only durable but also adds a modern touch to any kitchen decor. Its easy-to-clean design means that maintenance doesn’t become a chore; simply wipe down the surfaces to keep it looking new.

Another significant characteristic of this vent hood is its integrated grease filters, which are designed to capture and collect grease and other particles effectively. These filters are dishwasher-safe, making them convenient to clean and maintain, allowing for a more hygienic cooking environment.

Moreover, the KitchenAid Slide-out Vent Hood integrates seamlessly with other KitchenAid appliances, creating a cohesive look and feel within your kitchen. With options for customizable sizes and configurations, it can fit perfectly into a variety of kitchen layouts.

In summary, the KitchenAid Slide-out Vent Hood combines style, power, and convenience, making it an essential appliance for any home chef. Its advanced features, modern design, and user-friendly technologies elevate the kitchen experience, ensuring that cooking remains a pleasure rather than a chore.