KitchenAid Slide-out Vent Hood Use and Care Information, For GZ or YGZ model series

Page 8

panel front face

4.Insert control panel through the customized front panel.

control

panel plastic cover

5.Attach plastic cover over the control panel and snap into place.

6.Press control panel into the cutout and snap into place.

7.Attach customized front panel to glass screen frame with the three cross-recess screws.

For GZ or YGZ model series:

 

 

 

 

 

1-15/32"

 

 

 

30" (76.2 cm) model: 29-7/8" (75.9 cm)

 

 

 

(37.3 mm)

 

 

 

36" (91.4 cm) model: 35-7/8" (91.1 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3/4" (19.1 mm)

1.Use the dimensions shown to cut front panel for either a 30" (76.2 cm) or 36" (91.4 cm) front panel, depending on size of vent hood.

2.Remove the three cross-recess screws located behind the front trim panel in the glass screen frame. Remove front panel from glass screen frame.

3.Remove trim panel.

4. Attach customized front panel to glass screen frame with the three cross-recess screws.

To get the most efficient use from your new vent hood read the Use and Care Information section below.

Keep Installation Instructions

and Use and Care Information close by for easy reference.

Use and Care Information

For GZ or YGZ model series: WARNING — To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed control device.

For KWVU or YKWVU model series: This fan suitable for use with solid-state speed controls.

WARNING — TO REDUCE THE

Never leave surface units

If the flames do not go out

RISK OF FIRE, ELECTRIC SHOCK,

unattended at high settings.

immediately, EVACUATE AND

OR INJURY TO PERSONS,

Boilovers cause smoking and

CALL THE FIRE DEPARTMENT.

OBSERVE THE FOLLOWING:

greasy spillovers that may ignite.

NEVER PICK UP A FLAMING PAN

 

Heat oils slowly on low or

Use this unit only in the manner

— You may be burned.

medium settings.

intended by the manufacturer. If

DO NOT USE WATER, including

 

you have questions, contact the

Always turn hood ON when

wet dishcloths or towels — a

manufacturer. Before servicing or

cooking at high heat or when

violent steam explosion will result.

cleaning unit, switch power off

cooking flaming foods.

Use an extinguisher

at service panel and lock switch

Clean ventilating fans frequently.

ONLY if:

power off at service panel and

 

Grease should not be allowed to

You know you have a Class ABC

lock service panel to prevent

power from being switched on

accumulate on fan or filter.

extinguisher, and you already

accidentally. When the service

Use proper pan size. Always use

know how to operate it.

disconnecting means cannot be

cookware appropriate for the size

The fire is small and contained in

locked, securely fasten a

of the surface element.

the area where it is started.

prominent warning device such

WARNING — TO REDUCE THE

The fire department is being

as a tag to the service panel.

RISK OF INJURY TO PERSONS

called.

CAUTION: For general ventilating

IN THE EVENT OF A RANGE TOP

You can fight the fire with your

use only. Do not use to exhaust

GREASE FIRE, OBSERVE THE

back to an exit.

hazardous or explosive materials

FOLLOWING:

 

and vapors.

 

SMOTHER FLAMES with a close-

 

WARNING — TO REDUCE THE

 

fitting lid, cookie sheet, or metal

 

RISK OF A RANGE TOP GREASE

 

tray, then turn off the burner. BE

 

FIRE:

 

CAREFUL TO PREVENT BURNS.

 

 

 

 

 

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation Instructions Use and Care Guide Before you start Metal snipsProduct dimensions Vent Hood Must be Connected with Copper Wire onlyElectrical requirements 30 76.2 cm model 8 20.3 cm 36 91.4 cm model 11 27.9 cmWall venting Roof venting4 x 10 8.3 cm x 25 cm Vent system Maximum length = 26 ftNon-vented recirculating Kit, Part No must be used To wire through top wiring Adjustment screws For the Kwvu and Ykwvu model seriesMounting bracket Screw FilterUse and Care Information For GZ or YGZ model seriesAccessories Vent System Warranty ONE-YEAR Full WarrantyOur consultants provide assistance with Requesting Assistance or Service in U.S.ARequesting Assistance or Service in Canada Étapes de l’installation PagesPanneau avant personnalisé Information dutilisationVis Volet de réglage NiveauPince à dénuder PhillipsDimensions du produit Alimentation électriqueDécharge dans la pièce recyclage à travers le soffite Décharge à travers le toitConduit de 8,3 x 25 cm 4 x 10 po Axe central Cales de bois 27,3 cm10 3/4 po Ouverture àOpercules arrachables pour passage du câblage Couvercle de la boîte De connexionBride de Fond du Montage Placard HottePanneau avant personnalisé Pour modèles des séries Kwvu et Ykwvu37,3 mm 15/32 po Tableau de Commande couvercle de plastique Information d’utilisation et entretienPour modèles des séries GZ et YGZ Surface frontale du panneauAccessoires Garantie du système de ventilation Garantie Complète DE UN ANDemande d’assistance ou de service au Canada Succursales de service direct’exception de l’indicatif régional Et l’indicatif régional 807 en Ontario

Slide-out Vent Hood specifications

The KitchenAid Slide-out Vent Hood offers an innovative solution to maintaining a clean and comfortable kitchen environment. Designed to seamlessly blend into cabinetry, this vent hood provides functionality without compromising aesthetics. Its slide-out feature allows for easy access and efficient ventilation whenever cooking activities heat up, and it can be conveniently tucked away when not in use, preserving the sleek lines of your kitchen design.

One of the main features of the KitchenAid Slide-out Vent Hood is its powerful ventilation system, which effectively captures smoke, steam, and odors, ensuring that your kitchen remains fresh and free from airborne particles. With multiple fan speeds, users can easily adjust the airflow according to their cooking needs. The high-performance blower efficiently moves air, making it suitable for various cooking methods, from gentle simmering to high-heat frying.

In addition to its robust ventilation, this slide-out vent hood is equipped with bright, energy-efficient LED lighting. These lights illuminate the cooking surface below, enhancing visibility and ensuring that every culinary task is well-lit. The LEDs are not only long-lasting but also consume less energy, helping to reduce electricity bills while providing excellent illumination.

The KitchenAid Slide-out Vent Hood features a stainless steel construction, which is not only durable but also adds a modern touch to any kitchen decor. Its easy-to-clean design means that maintenance doesn’t become a chore; simply wipe down the surfaces to keep it looking new.

Another significant characteristic of this vent hood is its integrated grease filters, which are designed to capture and collect grease and other particles effectively. These filters are dishwasher-safe, making them convenient to clean and maintain, allowing for a more hygienic cooking environment.

Moreover, the KitchenAid Slide-out Vent Hood integrates seamlessly with other KitchenAid appliances, creating a cohesive look and feel within your kitchen. With options for customizable sizes and configurations, it can fit perfectly into a variety of kitchen layouts.

In summary, the KitchenAid Slide-out Vent Hood combines style, power, and convenience, making it an essential appliance for any home chef. Its advanced features, modern design, and user-friendly technologies elevate the kitchen experience, ensuring that cooking remains a pleasure rather than a chore.
Top Page Image Contents