KitchenAid LI32NA/W10674120B Install Vent System, Install In-Line Smart Kit Optional

Page 8

3.To wire through wall:

Mark a line distance “A” from the left of the centerline on the wall. Mark the point on this line that is 1" (2.5 cm) from the bottom of the cabinet. Drill a 1¹⁄₄" (3.2 cm) diameter hole through the rear wall at this point.

1" (2.5 cm)

A

Centerline

A. 12" (30.5 cm) for 30" (76.2 cm) models 12¼" (31.1 cm) for 36" (91.4 cm) models

Style 1 - Cut Openings for 3¼" x 10" (8.3 cm x 25.4 cm) Rectangular Vent System

Wall Venting

To make a 4" x 10½" (10.2 cm x 26.7 cm) rectangle in the wall:

1.Make 2 lines by measuring 2³⁄₄" (7.0 cm) and 6³⁄₄" (17.1 cm) down from underside of cabinet and mark on the centerline on the back wall.

2.Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the wall.

3.Use saber or keyhole saw to cut a rectangular opening in the wall for the vent.

Centerline

Cabinet

front

2¾"

(7.0 cm)

6¾"

(17.1 cm)

5¹⁄₄"

5¹⁄₄"

(13.3 cm)

(13.3 cm)

Style 2 - Cut Openings for Rectangular to 6" (15.2 cm) Round Vent Transition

Roof Venting and non - vented (recirculating)

To make a 6½" x 8½" (16.5 cm x 26.7 cm) rectangular cutout on the underside of cabinet bottom:

1.Mark lines ½" (1.3 cm) and 7" (17.8 cm) from the back wall on the centerline of the underside of cabinet.

2.Mark lines 4¼" (10.8 cm) to the right and left of the centerline on the underside of cabinet.

3.Use saber or keyhole saw to cut a rectangular opening for vent.

*¹⁄₂" (1.3 cm)

*7"

(17.8 cm) 4¹/₄" 4¹/₄" (10.8 cm)

(10.8 cm)

*From wall, not cabinet frame

To make a circular vent opening on the underside of the cabinet top:

1.Mark a centerline on the underside of the top of cabinet.

2.Mark a line 3³⁄₄" (9.5 cm) from the back wall on the underside of the top of cabinet.

3.Use a compass or a circle template to draw a 6¼" (15.2 cm) circle.

4.Use saber or keyhole saw to cut the circular vent opening.

Circular vent opening

*5"

(12.7 cm)

Cabinet cutouts

*From wall, not cabinet frame

Non-Vented (recirculating) Installation Through the Soffit/Cabinet

Measure and mark the centerline of the cabinet to the soffit above.

Measure from the bottom of the cabinet to the centerline of the where the vent will come through the soffit. Mark the location and use a saber saw or keyhole saw to cut a 5¾" (14.6 cm) hole for the vent cover.

A B

A. Vent cover

B. Centerline

Install Vent System

1.Install vent through the vent opening in cabinet or wall. Complete venting system according to the selected venting method. See “Venting Requirements” section.

2.Use caulking to seal exterior wall or roof opening around the cap.

Install In-Line Smart Kit - Optional

NOTE: Your range hood can work with either an internal or an in- line (external) blower motor system. An optional In-Line Smart Kit (purchased separately) allows the blower motor that comes with this range hood to be installed in a location other than inside the range hood cavity.

CAUTION: To reduce the risk of fire and electric shock, install this range hood only with the In-Line Smart Kit manufactured by Whirlpool, Part Number W10692945.

For installation see the In-Line Smart Kit installation instructions. See the “Assistance or Service” section to order.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Hotte DE Cuisinière Table DES Matières Table of ContentsRange Hood Safety Important Safety Instructions Location Requirements Installation RequirementsTools and Parts Installation Clearances Cold Weather InstallationsVenting Requirements Makeup AirCalculating Vent System Length Cm Round Vent SystemExample vent system ¹⁄₄ x 10 8.3 cm x 25.4 cm Vent SystemInstallation Instructions Determine Wiring Hole LocationTo wire through top Electrical RequirementsInstall Vent System Install In-Line Smart Kit OptionalTo wire through wall To make a 4 x 10½ 10.2 cm x 26.7 cm rectangle in the wallInstall Range Hood Vent Connector InstallationTop Vent Connector Installation Rear Vent Connector InstallationInstall Range Hood to Cabinet Make Electrical Connection Complete InstallationOptional Power Cord Kit Installations Timer Range Hood USEDisplay LightCleaning Range Hood CareSE133A Assistance or Service AccessoriesU.S.A CanadaKitchenaid Major Appliance Limited Warranty Http//kitchenaid.custhelp.comSécurité DE LA Hotte DE Cuisinière Votre sécurité et celle des autres est très importanteImportantes Instructions DE Sécurité Outillage et pièces Exigences D’INSTALLATIONExigences demplacement Installations pour régions à climat froid Exigences concernant lévacuationDistances de dégagement à respecter Air dappointCalcul de la longueur effective du circuit dévacuation Système dévacuation avec conduits circulaires de 6 15,2 cmExemple de circuit d’évacuation Système de décharge de 3¹⁄₄ x 10 8,3 cm x 25,4 cmInstructions Dinstallation Préparation de lemplacementDéterminer l’emplacement du trou de passage du câble Spécifications électriquesPassage du câble à travers le mur Cm x 25,4 cm Évacuation par le murCâblage à travers le sommet du placard Installation de la hotte Installation du conduit d’évacuationInstallation avec connecteur de conduit par le haut Installation avec connecteur de conduit par larrièreCouvercle du moteur Installation de la hotte dans le placard Raccordement électriqueAffichage Achever l’installationUtilisation DE LA Hotte Vitesse du ventilateur ÉclairageMinuterie Entretien DE LA Hotte NettoyageSchéma DE Câblage Terre L1 NeuAu Canada Assistance OU ServiceAccessoires Http W10674120B

LI32NA/W10674120B specifications

The KitchenAid LI32NA/W10674120B is an innovative and versatile addition to any contemporary kitchen. Designed with precision and efficiency in mind, this model encapsulates the quality and craftsmanship that KitchenAid is renowned for. One of the standout features of this appliance is its impressive dual cooling system, which ensures optimal temperature control and humidity management, preserving the freshness of food for extended periods.

Equipped with an energy-efficient inverter compressor, the LI32NA minimizes the fluctuations in temperature that can compromise food quality. This technology operates quietly, making it ideal for open-plan living spaces where sounds can travel. Additionally, this model includes a robust LED lighting system that illuminates every corner of the refrigerator, providing clear visibility to all stored items while also being energy-efficient.

The interior layout of the LI32NA/W10674120B is both practical and stylish, featuring adjustable glass shelves that allow for maximum flexibility in organizing food and beverages. The spacious design incorporates specialized compartments, including a crisper drawer for fruits and vegetables, ensuring they remain crisp and flavorful.

Moreover, this model boasts an advanced filtration system that helps eliminate unwanted odors and contaminants, enhancing the overall quality of the air in the refrigerator. The exterior is complemented by a sleek stainless-steel finish that not only adds a touch of elegance but is also easy to clean and resistant to fingerprints.

For those who appreciate technology, the LI32NA/W10674120B comes with smart connectivity options, enabling users to monitor and adjust settings remotely through a compatible mobile application. This feature ensures that you can manage your appliance even when you’re away from home.

Overall, the KitchenAid LI32NA/W10674120B is a perfect fusion of style, functionality, and cutting-edge technology. Its attention to detail and commitment to preserving food quality makes it an excellent choice for anyone looking to upgrade their kitchen. Whether you're a culinary enthusiast or simply seeking convenience, this refrigerator is designed to meet a variety of lifestyle needs, making meal preparation and food storage simpler and more enjoyable.
Top Page Image Contents