Install Range Hood

1.Remove the grease filters. See the “Range Hood Care” section.

2.Remove foam shipping pad from behind the blower motor.

3.Lift the range hood up under cabinet and determine final location by centering beneath cabinet. Mark on the underside of cabinet the location of the 4 keyhole mounting slots on the range hood. Set range hood aside on a covered surface.

A. Keyhole slot

4.Use ¹⁄₈" (3 mm) drill bit and drill 4 pilot holes as shown.

A. Drill pilot hole

5.Install the 4 - 4.5 x 13 mm mounting screws in pilot holes. Leave about ¹⁄₄" (6.4 mm) space between screw heads and cabinet to slide range hood into place.

¹⁄₄"

(6.4 mm)

Vent Connector Installation

Determine whether the range hood will be installed using either a top or rear vent connection.

Top Vent Connector Installation

1.Remove the top vent knockout.

2.Attach the round vent transition damper using 2 vent transition mounting screws.

3.Remove tape from damper flap

Rear Vent Connector Installation

NOTE: For rear venting, the blower motor position must be changed.

1.Remove the rear vent knockout.

2.Attach the rectangular vent damper (purchased separately, see “Assistance or Service” section to order) using 3 vent transition mounting screws. Make sure the vent damper pivot is nearest to the top back edge of the range hood.

NOTE: If the wall cap is directly behind the vent connector, the dampers in the connector and wall cap must not interfere. Remove the vent connector damper if they interfere.

	G
	F
	E	D
	A. Top round vent	D. Rear vent knockout
	transition	E. Rear rectangular transition
	B. Top round vent	knockout mounting screws (3)
	transition mounting	F. Hinge pin
	screws (2)	G. Rear rectangular vent transition
	C. Top vent knockout	G. Rear rectangular vent transition
	C. Top vent knockout

3.Place range hood on its back.

4.Using a T10 Torx adapter, remove the 8 screws holding the bottom panel assembly in place. Remove the bottom panel assembly and set it aside.

	E
E	E
E
E
A. Blower motor cover	D. Bottom panels
plate	assembly
B. Blower motor cover	E. Bottom panels
plate mounting screws	assembly mounting
(4)	screws
C. Back of range hood

5.Disconnect the blower motor electrical connector from the electrical box connector.

6.Using a T10 Torx adapter, remove the 4 screws from the motor cover plate. Remove the motor cover plate and set it aside.

LI32NA/W10674120B specifications

The KitchenAid LI32NA/W10674120B is an innovative and versatile addition to any contemporary kitchen. Designed with precision and efficiency in mind, this model encapsulates the quality and craftsmanship that KitchenAid is renowned for. One of the standout features of this appliance is its impressive dual cooling system, which ensures optimal temperature control and humidity management, preserving the freshness of food for extended periods.

Equipped with an energy-efficient inverter compressor, the LI32NA minimizes the fluctuations in temperature that can compromise food quality. This technology operates quietly, making it ideal for open-plan living spaces where sounds can travel. Additionally, this model includes a robust LED lighting system that illuminates every corner of the refrigerator, providing clear visibility to all stored items while also being energy-efficient.

The interior layout of the LI32NA/W10674120B is both practical and stylish, featuring adjustable glass shelves that allow for maximum flexibility in organizing food and beverages. The spacious design incorporates specialized compartments, including a crisper drawer for fruits and vegetables, ensuring they remain crisp and flavorful.

Moreover, this model boasts an advanced filtration system that helps eliminate unwanted odors and contaminants, enhancing the overall quality of the air in the refrigerator. The exterior is complemented by a sleek stainless-steel finish that not only adds a touch of elegance but is also easy to clean and resistant to fingerprints.

For those who appreciate technology, the LI32NA/W10674120B comes with smart connectivity options, enabling users to monitor and adjust settings remotely through a compatible mobile application. This feature ensures that you can manage your appliance even when you’re away from home.

Overall, the KitchenAid LI32NA/W10674120B is a perfect fusion of style, functionality, and cutting-edge technology. Its attention to detail and commitment to preserving food quality makes it an excellent choice for anyone looking to upgrade their kitchen. Whether you're a culinary enthusiast or simply seeking convenience, this refrigerator is designed to meet a variety of lifestyle needs, making meal preparation and food storage simpler and more enjoyable.