Range Hood Care

Cleaning

IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filters before operating hood.

Be sure lights are cool before cleaning the hood.

Exterior Surfaces

Clean the range hood with a mild detergent and soft cloth. Do not use abrasive cleanser or steel-wool pads.

Metal Grease Filters

The filters should be washed frequently. Place metal filters in dishwasher or hot detergent solution to clean.

Drain water and let each filter dry thoroughly before replacing it.

To Remove Metal Grease Filters

1.Turn off fan and lights. Check that halogen lamp is cool.

2.Pull out on knob and turn counterclockwise to release metal grease filters.

4.Place charcoal filter into opening. Press back and up on fixing hooks to secure filter in place.

5.Replace metal grease filters. See “Metal Grease Filters” section.

To Replace Charcoal Filters

1.Turn fan and lights off. Check that halogen lamp is cool.

2.Remove the metal grease filters. See “Metal Grease Filters” section.

3.Set metal grease filters aside.

4.Discard the used charcoal filter.

5.Place charcoal filter into opening. Press back and up on fixing hooks to secure filter in place.

6.Replace metal grease filters. See “Metal Grease Filters” section.

To Replace Metal Grease Filters

1.Insert back edge of filter into rear channel of the filter opening.

2.Pull out on knob and turn counterclockwise, position front edge into place and release knob.

Charcoal Filters - For Non-vented (recirculating) Installations

The charcoal filter is not washable nor reusable.

It should be changed every 4 months in normal use or more frequently in heavy use.

The charcoal filter captures unpleasant cooking odors.

To Install Charcoal Filters

1.Turn fan and lights off. Check that halogen lamp is cool.

2.Remove the metal grease filters. See “Metal Grease Filters” section.

3.Set metal grease filters aside.

Replacing a Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. Replace using a tissue.

If new lamps do not operate, make sure the lamps are inserted correctly before calling service.

1.Disconnect power.

2.Remove the 2 screws holding the lighting support.

3.Gently pull the lighting support out of the range hood.

4.Remove the light from the lighting support and replace with a 12-volt, 20-watt maximum, halogen lamp made for a MR11 base.

Check that the 2 pins are properly inserted in the lamp holder socket holes.

5.Replace the lighting support.

36"(91.4CM) ISLAND RANGE HOOD specifications

The KitchenAid 36" (91.4CM) Island Range Hood is an exceptional addition to any modern kitchen, combining functionality with sophisticated design. This hood is engineered to efficiently remove smoke, steam, and odors while enhancing the aesthetic appeal of your kitchen island setup.

One of the standout features of the KitchenAid Island Range Hood is its powerful ventilation system. With multiple speed settings, including a powerful boost function, it ensures optimal air circulation and keeps your kitchen environment fresh, regardless of the intensity of your cooking. The hood boasts a high CFM (cubic feet per minute) rating, allowing it to capture and vent even the most pungent cooking odors effectively.

The hood is designed with a sleek, stainless steel finish that complements any kitchen decor. Its modern appearance adds elegance and sophistication, making it not just a functional appliance, but also a statement piece in your kitchen. The adjustable duct cover allows for versatile installation heights, ensuring a perfect fit for various ceiling heights, making it an ideal choice for island installations.

Equipped with innovative technologies, the KitchenAid Island Range Hood features LED lighting that enhances visibility over your cooking area. The bright, energy-efficient lights illuminate your workspace without excessive heat, providing the right ambiance for culinary creativity. Additionally, it has a dishwasher-safe baffle filter, which traps grease and can be easily cleaned, ensuring the hood maintains its performance and appearance over time.

The hood also includes a convenient remote control feature, allowing you to adjust settings and switch the unit on and off from a distance. It integrates seamlessly with other KitchenAid appliances, creating a cohesive and modern kitchen environment.

Furthermore, noise levels are kept to a minimum, thanks to the hood’s design and advanced engineering, enabling you to enjoy a peaceful cooking experience. Whether you are a professional chef or a home cooking enthusiast, the KitchenAid 36" Island Range Hood offers the perfect blend of style, efficiency, and advanced technology—all essential elements for an exceptional cooking environment.