Microwave Cooking
Cooking at different cook powers (cont.)
1.Put food in oven and close the door.
2.Set cooking time.
Example for 10 minutes, 30 seconds:
5. After cooking, open the door
OR
TOUCH
MICROWAVE OVEN
TOUCH
1 0
QUANTITY
3 0
CONTROL
LOCK QUANTITY
3. Set cook power.
Example for 50% cook power:
TOUCH then
MICRO 5
COOK
POWER
NOTE: During setup, if you want to change the cooking time after setting the cook power, wait for TIME to reappear on the display, then enter the new cooking time.
4. Start oven.
TOUCH
EASYMINUTE
START
(display counts down time)
NOTES:
•If you want to add more time during cooking use EASY MINUTE. See “Using EASY MINUTE” in the “Getting to Know Your Microwave Oven” section for more information.
•If you want to change cooking time after cooking has started, touch MICRO and enter the new cooking time within 5 seconds.
When cooking time ends, four tones will sound and the display will show “End”.
CANCEL
Four tones will repeat every minute until you open the oven door or touch CANCEL. This will clear the display.
Cooking in stages
For best results, some recipes call for one cook power for a certain length of time, and another cook power for another length of time. Your oven can be set to change from one to another automatically.
1.Put food in oven and close the door.
2.Set cooking time for first cycle.
Example for 7 minutes, 30 seconds:
TOUCH
7 3 0
CONTROL
LOCK QUANTITY
3. Set cook power for first cycle (optional).
If you want to cook at full (100%) cook power, go to Step 5.
Example for 50% cook power:
TOUCH then
MICRO 5
COOK
POWER
NOTE: During setup, if you want to change the cooking time after setting the cook power, wait for TIME to reappear on the display, then enter the new cooking time.
16