Kambrook KFP600 manual Assembly and Operation of Your Kambrook Food Processor, Before First Use

Before First Use

Before first use remove and safely discard any promotional labels and wash the Food Processor bowl, Food Processor lid, processing blade, discs and Blender jug in warm, soapy water. Dry thoroughly.

WARNING: Blades and discs are sharp and must be handled carefully.

IMPORTANT: Place the motor base on a level, flat surface.

Assembling the Food

Processor Bowl

1.Place the motor base on a flat, dry surface such as a bench top. Make sure that the motor base is turned off at the power outlet and the power cord is unplugged.

2.Place Spindle 1 on the drive shaft of the motor base (See Fig. 1).

3.With the lid off, hold the Food Processor bowl by the handle and place the bowl over Spindle 1 on the motor base. To do this, first align the Food Processor bowl so

that the ‘ALIGN’ symbol found on the top of the Food Processor bowl is directly above the ‘ALIGN’ symbol on the motor base.

NOTE: The handle will be situated directly over top of the speed control dial.

4.Hold the motor base with one hand and turn the Food Processor bowl handle anti-clockwise

with the other so that the ‘LOCK’ symbol found on top of the Food Processor handle is directly above the ‘LOCK’ symbol on the motor base. The Food Processor bowl

is now locked securely on to the motor base.

5.Once the Food Processor bowl is locked on to the motor base, place Spindle 2 into the Food Processor bowl so that it sits over

the top of Spindle 1 (See Fig. 2).

Fig. 1

NOTE: The processing blade, the disc holder, the dough blade and whisking disc will not turn Spindle 2 when Spindle 1 is not correctly fitted on the drive shaft of the motor base.

Fig. 2

With the Food Processor bowl locked into place and Spindle 2 in position, the Food Processor can now be used for various processing tasks including using the processing blade, the stainless steel discs, the dough blade and whisking disc.