Care, Cleaning and Storage
Stick Mixer
Before cleaning, turn the power off at the power outlet and then remove the plug. Remove the motor body from the stainless steel blending shaft.
The stainless steel blending shaft should be hand washed in hot soapy water, rinsed and dried thoroughly after each use.
Do not use abrasive cleaners or steel wool.
QUICK WASH: Between each processing task, with the motor body attached and turned on at the power outlet, place the stainless steel blending shaft and blade assembly only in to a jug of water and press the ‘BOOST’ button for 5 seconds. This will remove any food on the blade and shaft and allow you to continue onto the next processing task.
Chopping Bowl
Before cleaning, turn the power off at the power outlet and then remove the plug. Remove the motor body from the chopping bowl lid, and then remove the lid and chopping blade from the chopping bowl. The chopping bowl, chopping bowl lid and chopping blade should be hand washed in hot soapy water, rinsed and dried thoroughly after each use. Do not use abrasive cleaners or steel wool.
Motor body
To remove any food residue wipe the motor body and cord with a damp cloth only. Do not use abrasive cleaners or steel wool.
Never immerse the motor body in water or any other liquid.
NOTE: The detachable blender shaft is dishwasher safe.
Do not wash any other parts of the Stick Mixer in the dishwasher.
Blades are extremely sharp, handle with care.
Storage
Before storage, turn the power off at the power outlet and then remove the plug. Ensure the appliance is clean and completely dry.
Attach the blending shaft to the motor body. Store upright on the bench or in a convenient cupboard.
Place the chopping blade into the chopping bowl and insert the chopping bowl lid. Store upright on the bench or in a convenient cupboard.
13