Operating Your Kambrook Power Drive Stick Mixer continued
To Attach the Stainless Steel Blending Shaft
Hold the shaft with the blades down, and 
the indicator symbol on the top end of the blending shaft with the corresponding indicator symbol on the end of the motor body. Screw the motor body in a clockwise direction until the 
indicator symbol on the motor body is aligned with the 
indicator symbol on the blending shaft (See Fig 1).
Always ensure the blending shaft is dry, and no water is left inside, before reattaching.
Fig. 1
To Use the Hand Blender
Ensure the blender is completely and properly assembled as detailed above.
1.Place food to be processed into the jug provided (or a sufficiently large mixing bowl or saucepan).
The jug provided should be only ½ full or less when blending liquids or when making a puree of fruit and/ or vegetables (See Fig 2).
2.For food preparation tips and recipes refer to page 14 and the recipe section.
Fig. 2
3.Insert the plug into a
230V or 240V power outlet and turn the power on.
4.By turning the Variable Speed Control dial on top of the motor body, select a speed between MIN and 5.
5.Place the blending shaft as deeply as possible into the jug, press and hold the ‘VARIABLE’ button to turn the blender on. The button must be kept depressed for the required duration of operation.
6.If extra turbo power is required when blending, press the ‘BOOST’ button.
7.Work through the ingredients in the jug with a gentle raising and lowering motion.
8.Switch off the motor by releasing the ‘VARIABLE’ or ‘BOOST’ button.
9.Ensure the motor has completely stopped before lifting the blender out of the jug.
10.When processing has finished, switch off at the power outlet and remove the power plug.
8