CeramicGlass
Cleaning off the cooktop before and after each use will help keep it free from stains and provide the most even heating. For more information, see “General Cleaning” section.
■Do not store jars or cans above the cooktop. Dropping a heavy or hard object onto the cooktop could crack the cooktop.
■Do not leave a hot lid on the cooktop. As the cooktop cools, air can become trapped between the lid and the cooktop, and the ceramic glass could break when the lid is removed.
■For food containing sugar in any form, clean up all spills and soils as soon as possible. Allow the cooktop to cool down slightly. Remove the spills while the surface is still warm. You may want to wear oven mitts while cleaning the cooktop. If sugary spills are allowed to cool down, they can adhere to the cooktop and can cause pitting and permanent marks.
■Do not slide cookware or bakeware across the cooktop. Aluminum or copper bottoms and rough finishes on cookware or bakeware could leave scratches or marks on the cooktop.
■Do not allow objects that could melt, such as plastic or aluminum foil, to touch any part of the entire cooktop.
■Do not use the cooktop as a cutting board.
■Use cookware about the same size as the surface cooking area. Cookware should not extend more than ½" (1.3 cm) outside the area.
B
A
C
A. Surface cooking area
B.Cookware/canner
C.½" (1.3 cm) Maximum overhang
■Use
■Determine flatness by placing the straight edge of a ruler across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.
■Make sure the bottoms of pots and pans are clean and dry before using them. Residue and water can leave deposits when heated.
HomeCanning
IMPORTANT: Aluminum canners or canners that are not completely flat on the bottom will not activate the cooking surface area. See “Cookware” section.
When canning for long periods, alternate the use of surface cooking areas between batches. This allows time for the most recently used areas to cool.
■Center the canner on the largest surface cooking area. Canners should not extend more than ½" (1.3 cm) beyond the surface cooking area.
■Do not place canner on 2 surface cooking areas at the same time.
■For more information, contact your local agricultural department. Companies that manufacture home canning products can also offer assistance.
Cookware
Only ferromagnetic pans can be used for induction cooking.
Ferromagnetic materials include:
■Enameled steel
■Cast iron
■Stainless steel designed for induction cooking
Non-ferromagnetic materials include:
These types of pans will not work with induction cooking.
■Stainless steel
■Glass
■Ceramic
■Copper or aluminum pans
To find out whether your pans can be used with an induction cooktop, flip the pan over, hold a magnet to the bottom of the pan, and see whether it sticks.
The number on the surface cooking area heat setting display will flash if no pan is placed on the surface cooking area, or the pan is not made of the right material, or it is not the right size. It will stop flashing once a suitable pan is placed on the surface cooking area. If you take longer than 90 seconds to place the correct pan on the surface cooking area, the surface cooking area will turn off.
Ideal cookware should have a flat bottom, straight sides and a
Choose the correct pan size for each surface cooking area. The diameter of the pan’s base should correspond to the size of the surface cooking area.
NOTE: Cookware manufacturers often give the diameter across the top of the pan. This is usually larger than the diameter of the base.
Pans with rough finishes may scratch the cooktop.
7