Siemens HG2528UC, HG2425UC manual Clock, Select Functions Menu

Page 18

 

Getting Started

The Clock

 

About the Clock

• Always set the clock after installation or after a power failure. Once power

 

returns to the oven, the clock defaults to 12:00 am.

 

• The time of day is displayed in hours and minutes.

 

• The clock time will appear during all oven operations except when the timer is

 

running.

 

• The oven is preset to a 12 hour clock and indicates AM and PM. To switch to

 

a 24 hour clock, see "Select Function” section.

 

• If you do not complete the operation of setting the clock, the oven will beep

 

periodically as a reminder to set the clock time. Press OFF to stop the beep-

 

ing.

Setting the Clock

1. CLOCK will be displayed and the hour digits

12:

 

00 AM

 

 

 

 

will flash. Turn knob to select hour and AM or

 

CLOCK

 

PM.

 

 

 

 

 

 

 

 

2.Press TIME. CLOCK will still be displayed and the minute digits will flash.

3.Turn knob. Set minutes.

4.Press TIME and the clock is now set.

Note: If operation is not completed, the oven will beep periodically as a reminder to set clock time. Press OFF.

Changing the Clock

The Select Functions Menu

Change the Beep Vol- ume

English 14

1.

Press TIME. TIMER 1 flashes in display.

 

 

1

Time

2.

Turn knob to select CLOCK.

 

3.

Press TIME and hour digits flash.

2

Cooking Mode

4.

Turn knob to change hours.

Start

 

 

Temperature

5.

Press TIME again and minute digits flash.

 

 

 

6.Turn knob to change minutes.

7.Press TIME again and the clock is set.

Note: To cancel the TIME selection when setting the clock, press OFF at any time while in the clock mode.

SELECT FUNCTIONS is the section of the menu where you can set or change the range features listed below.

To access the SELECT FUNCTION menu

1.Press and hold COOKING MODE press pad for five (5) seconds. SELECT FUNCTION is displayed.

2.Turn knob slowly to desired feature. There will be a slight delay before each message (or feature) can be seen in the display. Turn knob slowly and wait approximately one second for display to show next feature.

3.Press START to choose the function.

4.Turn knob to desired setting and press START.

When all settings for the function are complete, SELECT FUNCTION flashes again.

5.Press OFF to exit the Select Functions Menu.

The volume of the control beep can be changed from LOW (softest) to HIGH (loudest). The control default for beep volume is Medium.

1.Access SELECT FUNCTIONS Menu.

2.Turn knob clockwise until VOLUME is displayed.

3.Press START.

4.Turn knob to select volume level Low, Medium or High.

5.Press START.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Siemens Gas Range With threeD Surround Convection Page Table of Contents Page About This Manual How This Manual Is OrganizedImportant Safety Instructions SafetyImportant Safety Instructions Fire SafetyTo Reduce the Risk of a Range TOP Grease Fire Gas Safety Burn PreventionChild Safety Cleaning SafetyCookware Safety Proper Installation and MaintenanceFood Safety Parts and Accessories Getting StartedSealed Gas Burners Burner Caps Burner Grates High Power BurnerDiffusion Burner Caps Electronic IgnitorInserting Racks Into Oven Oven RacksFlat Oven Racks Extension Oven Rack some mod- elsRemoving and Replacing Disassembly for cleaningReassembly Closed Position Back of RackCleaning ReassemblyOven Bottom Self CleaningIndicators and Other Features Oven VentControl Panel Oven Control PanelClock Select Functions MenuChange the Tempera- ture Scale Turn Clock Display on or OFF Set the Sabbath Feature About the Sabbath Feature Setting the Sabbath Feature for the Oven OnlyBefore Using the Appliance for the First Time Setting the Sabbath Feature for the Warming Drawer OnlyAbout the Cooktop Setting the Burner Heat LevelOperation Cooktop OperationTurning the Burner off Setting the Cooking Mode Temperature Operation OvenUsing the Timer Using Timed or Delayed CookUsing the Probe some models Setting the ProbeVection Roast Operation Warming Drawer some models About the Warming DrawerWarming Drawer Specifi- cations Turning Off the Warming Drawer PreheatingTurning on the Warming Drawer Crisping Stale ItemsCooktop Cooking Guide Getting the Most Out of Your ApplianceGetting the Most Out of Your Cooktop Cookware Selection GuideGetting the Most Out of Your Oven Oven Cooking GuideProbe some models Baking PansPreheating the Oven Inserting the ProbeOven Cooking Modes For Best ResultsConvection Baking Chart Broiling Chart Convection Roast Chart DehydrateDehydrate Chart Getting the Most Out Your Warming DrawerGeneral Tips Food Temperature Covered Uncovered Daily Cleaning Cleaning and MaintenanceCleaning Cooktop Cleaning GuidelinesBurner Cap and exterior finish Cleaning Oven Oven Cleaning ChartPart Recommendations Self Cleaning the Oven Preparing the Oven for Self CleanSelf Clean Cooktop Maintenance Cleaning Warming DrawersMaintenance Oven MaintenanceReplacing the Oven Door Replacing an Oven LightPage Service Before Calling ServiceTroubleshooting Charts Service Standard Limited Warranty Statement of Limited WarrantyHow to Obtain Service or Parts Product Data PlatePage

HG2528UC, HG2425UC specifications

Siemens has established a strong reputation in the kitchen appliance market, and their HG2425UC and HG2528UC series built-in ovens are no exception. These models represent a perfect blend of design, innovation, and functionality, catering to the modern home chef's needs and aesthetic preferences.

The Siemens HG2425UC and HG2528UC built-in ovens feature advanced cooking technologies, ensuring optimal cooking performance. Both models utilize European design, which emphasizes functionality without compromising on style. Their sleek, modern exterior is complemented by user-friendly controls, making it easy to navigate various cooking modes and settings.

One of the main highlights of these models is the multi-function cooking capabilities. The ovens come equipped with a range of cooking modes, including convection baking, broiling, and an innovative steam cooking function. The steam feature allows for healthier cooking by retaining moisture and enhancing flavors in dishes. This versatile functionality makes it possible to prepare a wide variety of dishes, from perfectly roasted meats to delicate pastries.

Another notable characteristic is the Precision Temperature Control, which ensures even heat distribution throughout the cooking cavity. This feature is particularly beneficial for baking, as it prevents hot spots and ensures consistent results regardless of the dish being prepared. The ovens also come with a built-in timer and a digital display that provides useful information at a glance, helping users manage their cooking times effectively.

Ease of cleaning is a significant consideration in today’s busy kitchens, and the HG2425UC and HG2528UC do not disappoint. They feature a self-cleaning option that utilizes high temperatures to burn away food residue, eliminating the hassle of manual scrubbing. Additionally, the oven surfaces are designed to resist smudges and fingerprints, maintaining a pristine appearance.

Energy efficiency is another important aspect of these Siemens ovens. They are designed to meet stringent energy standards, ensuring that users can cook without worrying about excessive energy consumption. The insulation technology used in these models helps to retain heat effectively, further enhancing their energy efficiency.

These ovens also offer spacious interiors, accommodating even large dishes. With various rack positions and additional cooking accessories available, users can maximize their cooking capabilities.

In conclusion, Siemens HG2425UC and HG2528UC built-in ovens embody cutting-edge technology, elegant design, and practicality. With their versatile cooking options, user-friendly features, energy efficiency, and ease of maintenance, these ovens are ideal for anyone looking to elevate their culinary experience in the kitchen. Investing in a Siemens oven means investing in quality, innovation, and style.
Top Page Image Contents