Denon AVR-5800 operating instructions Multi-source recording/playback

Multi-source recording/playback

With the exception of the case in [2] below, only the signal connected to the analog input jacks are output from the REC OUT and multi-room output jacks.

[1] Playing one source while recording another (REC OUT mode)

1	Press the REC/M-ZONE 2 button until	REC /
	“REC OUT SOURCE” appears on the	M-ZONE 2
	set’s display.
		(Main unit)
2	Select the source you want to record	FUNCTION
	appears on the set’s display.

•The indicator for the selected program source lights.

		(Main unit)
3	Set the recording mode.
	• For operating instructions, refer to the manual of the
	component on which you want to record.
4	To cancel, press the REC/M-ZONE 2	REC /
	button twice.	M-ZONE 2

(Main unit)

		1, 2		1, 4		2
Display					2
	PHONO CD	TUNER	AUX	DVD	/	VDP	TV	/ DBS
	VCR -1	-2	V.AUX	MD	/	TAPE	-1	-2

NOTES:

•Recording sources other than digital inputs selected in the REC OUT mode are also output to the multi source audio/video output jacks.

•Digital signals are not output from the MULTI ZONE 1 audio output jacks.

[2] Recording Dolby Digital and DTS multichannel sources

•With this set it is possible to record Dolby Digital and DTS multichannel signals converted into 2-channel analog signals.

•The recording signals are output to the MULTI ZONE-2 OUT, TAPE and VCR output terminals.

1	Press the REC/M-ZONE 2 button until	REC /
	“REC OUT SOURCE” appears on the	M-ZONE 2
	display.
		(Main unit)
2	Set the input mode according to the	INPUT
	source to be played.
		MODE
		(Main unit)
3	Set the surround mode by pressing the DIRECT or STEREO
	button.

•The multichannel digital signals are down-mixed and output to the TAPE and VCR output terminals.

STEREO

	or	or
	(Main unit)	(Remote control unit)
4	Set the recording mode.

3

3

36