Theelectronicprogrammer
GB
|
|
|
|
|
| DISPLAY |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| ||
END OF |
|
|
| •• •• |
|
|
|
| CLOCK icon | |||
COOKING icon |
|
|
|
|
|
| ||||||
DURATION |
|
|
|
|
|
|
| TIMER icon | ||||
|
|
|
|
|
| |||||||
icon |
|
|
|
|
|
|
|
|
| |||
DECREASE TIME |
|
|
|
|
|
|
|
|
|
|
| INCREASE TIME |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||||||
button |
|
|
|
|
|
|
|
| button | |||
SET TIME
button
The Top Oven and Main Oven can be controlled by the automatic timer. When the timer control has been set for one oven, it is possible to use the other oven only during the same automatic cooking programme.
NEVER operate the grill when the ovens are set to cook automatically because the oven cavity can become warm and this may cause bacterial growth in food.
Setting the clock
The clock may be set when the oven is switched off or when it is switched on, provided that a the end time of a cooking cycle has not been programmed previously.
After the appliance has been connected to the mains,
or after a blackout, the 
icon and the four numerical digits on the DISPLAY will begin to flash.
1. Press the 
button several times until the 
icon and the four digits on the display begin to flash.
2. Use the “+” and
3. Wait for 10 seconds or press the 
button again to finalise the setting.
Setting the timer
This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed.
1. Press the 
button several times until the 
icon and the three digits on the display begin to flash.
2. Use the “+” and
3. Wait for 10 seconds or press the 
button again to finalise the setting.
The display will then show the time as it counts down. When this period of time has elapsed the buzzer will be activated.
Programming cooking
A cooking mode must be selected before programming can take place.
Programming the cooking duration
1. Press the 
button several times until the 
icon and the three digits on the DISPLAY begin to flash.
2. Use the “+” and
3. Wait for 10 seconds or press the 
button again to finalise the setting.
4. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. Press any button to stop it.
•For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed. The programme will stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
A cooking duration must be set before the cooking end time can be scheduled.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Next, press the 
button until the 
icon and the four digits on the DISPLAY begin to flash.
3. use the “+” and
4. Wait for 10 seconds or press the 
button again to finalise the setting.
5. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds.Press any button to stop it. Programming has been set when the 
and 
buttons are illuminated. The DISPLAY shows the cooking end time and the cooking duration alternately.
•For example: It is 9:00 a.m. and a duration of 1
hour has been programmed. 12:30 is scheduled as the end time. The programme will start automatically at 11:30 a.m.
Cancelling a programme
To cancel a programme:
•press the 
button until the icon corresponding to the setting you wish to cancel and the digits on the display are no longer flashing. Press the
•Press and hold the “+” and
10