Hotpoint HUG 52P, HUG 52X, HUG 52K, HUG 52G, 50HGP Gas connection, Disposing of the appliance

Page 5

Installation

Moving the Cooker

Fig. B

 

Fig. C

Gas connection

 

 

 

 

The cooker should

 

 

be connected to the

 

HOT PARTS

gas-supply by a

 

 

 

 

gas safe registered

 

 

installer. During

 

mm

installation of this

 

product it is

 

600

 

essential to fit an

 

 

 

 

approved gas tap to

 

 

isolate the supply

 

 

from the appliance

for the convenience of any subsequent removal or servicing. Connection of the appliance to the gas mains or liquid gas must be carried out according to the prescribed regulation in force, and only after it is ascertained that it is adaptable to the type of gas to be used. If not, follow the instructions indicated in the paragraph headed “Adaptation to different gas types”. In the case of connection to liquid gas, by tank, use pressure regulators that conform to the regulation in force. The gas supply must be connected to the left of the appliance. Be sure that the hose does not pass through the rear of the cooker touching hot parts.

!make sure the supply pressure conforms with the values shown in the table entitled “Caracteristics of the burners and nozzles”.

When the cooker is installed between cabinets (recessed), the gas connection must be effected by an approved flexible hose with bayonet fitting

(BS 669 Current Edition). The gas inlet for the cookers is a threaded G 1/2 gas female fitting .

Connecting the gas supply

GB

To make the connection, a flexible hose should be used corresponding to the current gas regulations which are:

•the hose must never be at any point in its lenght in contact with the “hot” parts

of the

cooker;

•

the hose must never be longer than 1,5

metre;

 

•

the hose must not be subject to any tension

or torsional stress and it must not

have anyexcessively narrow curves or bottlenecks;

•the hose must be easy to inspect along its entire length to check its condition;

•the hose must always be in good condition, never attempt to repair.

!the installation must comply with gas safety (installation and use) regulations 1984. In all cases for the above, by low, a qualified, gas safe i approved engineer must be called for installation.

Disposing of the appliance

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

Adapting the cooker to different types of gas

In order to adapt the cooker to a different type of gas with respect to the gas for which it was produced (indicated on the label attached to the lid), follow these steps:

a)replace the hose holder mounted on the appliance with that supplied in the bag of “cooker accessories”.

b)Replacing the burner nozzles on the hob:

•remove the grids and slide the burners from their housings;

• unscrew the nozzles using a 7 mm socket

spanner, and replace them with nozzles for

the new type of gas

(see table 1 “Burner and nozzle characteristics”).

•replace all the components by

repeating the steps in reverse order.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operating Instructions ContentsIntroduction Keep the cooker clean, as a build up For your SafetyAlways NeverInstallation of the cooker InstallationAdapting the cooker to different types of gas Gas connectionDisposing of the appliance Adapting to different types of gas main and top oven Brown Live Green Yellow Electrical ConnectionBlue Neutral Concerns certain models only Burner and Nozzle SpecificationsFeatures Models with Hob Gas Burner Safety Devices to Prevent Leaks Electronic timerControl Panel Electronic Ignition for the Gas HobElectronic Minute Minder To cancel a previous settingHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingHotplates Gas Cut OffGrill Pan Handle GrillTo USE the Grill Relighting the BurnerTo USE the TOP Oven Guidance on Using the TOP OvenTop Oven Fish Top Oven Cooking ChartMain Oven Meat and Poultry Main Oven Cooking Chart‘S’SLOW Setting Using the Main Oven for Other FunctionsPoints to consider when preparing food for Slow cooking OperationCare and Cleaning Side Opening Doors Glass Inner Door Panel where fittedSupport the weight of the inner glass when Cleaning the door glass is the same asClean cloth. Ensure that glass doors are not Glass Inner Door Panel where fitted openProblem Check Disposal of your product Disposal of the applianceGuaranteeGB Xerox Fabriano 12/2013
Related manuals
Manual 24 pages 59.4 Kb

50HGP, HUG 52G, HUG 52K, HUG 52X, HUG 52P specifications

The Hotpoint HUG 52 range of cookers, comprising the HUG 52P, HUG 52X, HUG 52K, HUG 52G, and 50HGP, is designed to provide exceptional cooking performance, style, and versatility for the modern kitchen. Each model boasts unique characteristics yet shares core technologies and features that enhance user experience and culinary creativity.

One of the standout features of the Hotpoint HUG 52 series is its dual-fuel functionality, combining the precision of a gas hob with the consistent and even cooking of an electric oven. This harmony of technology allows home chefs to attain professional results with ease. The gas burners deliver instant heat while the electric oven ensures that heat is retained evenly, making it perfect for baking, roasting, and simmering.

The HUG 52 models are equipped with multiple gas burners with varying outputs, including a powerful wok burner ideal for stir-frying and high-heat cooking. The heavy-duty cast iron pan supports provide stability and allow for a variety of cookware, from small saucepans to large skillets. Whether you are boiling pasta or sautéing vegetables, the flexibility of the hob layout caters to all cooking styles.

Another innovative feature within the Hotpoint HUG 52 range is the fan-assisted electric oven, which circulates heat for uniform cooking results. This technology not only allows multiple dishes to be cooked simultaneously without flavor transfer but also reduces cooking times. The ovens come with a range of cooking functions, including fan oven, conventional, grill, and defrost settings, making them adaptable for various recipes.

The HUG 52 series includes an easy-to-clean enamel interior, which minimizes the effort required for maintenance. The removable inner glass door is also designed for easy cleaning, ensuring that your appliance not only performs well but continues to look good over time.

Safety features are paramount in the Hotpoint HUG 52 range. Equipped with flame failure devices on each burner, these cookers automatically cut off the gas supply if the flame goes out, providing peace of mind for users. Additionally, the models include a programmable timer and minute minder, allowing for precise cooking without the need for constant supervision.

With their stylish designs available in various finishes such as white, stainless steel, and black, the HUG 52 range can seamlessly fit into any kitchen aesthetic. The combination of functionality, safety features, and stylish design makes the Hotpoint HUG 52 series a robust choice for those seeking reliable and versatile cooking appliances. Whether you're an amateur cook or a seasoned chef, these cookers offer the perfect solutions for all culinary needs.
Top Page Image Contents