Hotpoint EG54, EG73 EG76 manual Clockface, Symbols, Timer Function Buttons, Auto Cooking Programme

Page 7

Timer Operation (EG73, EG76)

CLOCKFACE

The timer incorporates a 24 hour clock.

Ensure the correct time of day is always set, before using your cooker.

SYMBOLS

A ‘bell’ symbol will light up when you select a Minute Minder Period and will remain lit for the period set.

At the end of the Minute Minder Period, the timer will emit an audible tone and the ‘bell’ symbol will disappear.

The ‘cookpot’ symbol will light up either:–

When the timer is in manual mode, or

During the actual Cook Period.

‘AUTO’ will light up:–

When the timer is first turned on it will flash. It will go out when a time of day is set or when the timer is set to manual.

The ‘AUTO’ symbol will flash at the end of an Auto Cooking programme to indicate that the programme has finished.

(When the ‘AUTO’ symbol is flashing, to return the oven to Manual operation, turn the oven controls off, ensure that the correct time of day is set, and press the “Manual” button – The ‘AUTO’ symbol will go out).

TIMER FUNCTION BUTTONS

Minute Minder Here you can set a time period of up to 23 hours 59 minutes, that will count down.

ButtonWhen it reaches zero, the timer will emit an audible tone.

For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.

AUTO COOKING PROGRAMME

Cook Period Button Cook Period is the actual length of time for which, the timer will switch the oven(s) on as part of an “Auto Cooking” programme.

(e.g. If you set 2 hours, the food will be cooked for 2 hours).

End Time Button The time of day at which you want an “Auto Cooking” programme to end.

For Example: If you set a “Cook Period” for 2 hours, and “End Time” of 11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme has finished.

Notes:

-When setting an Auto Cooking programme you will need to set the oven control(s) to the required temperature(s) when you set the timer.

-If an Auto Cooking programme has been set the oven(s) will only operate during the pre-programmed time.

Manual Button Needs to be pressed to cancel an Auto Cooking programme and return the oven(s) to Manual operation.

“+” and “–” Buttons Used to adjust the various timer function settings.

7

Image 7
Contents Instructions Contents Introduction Please read the precautions below before using your cooker For Your SafetyNever Guidance on Automatic Cooking Automatic CookingAuto Cooking Programme SymbolsTimer Function Buttons ClockfaceSetting the Minute Minder Setting the Time of DAYAuto Cooking Programmes Timer Operation EG73, EG76 Other Notes on Timer Operation Timer Operation EG54 19.50 To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingGrill PAN Handle GrillTo USE the Grill Main Oven FAN Cooking OvensTOP Oven Conventional Cooking To USE the TOP OvenTop Oven Cooking Oven Cooking ChartFan Oven Cooking BakingPreparing Food for Slow Cooking Slow Cooking ‘S’ SettingOven Heat Clean Linings Care and CleaningReplacement of Oven Light Bulb Cooker Finish Cleaning Method Something Wrong with Your Cooker Problem CheckDisposal of Your Product Location Installation InstructionsGAS Safety Installation & USE Regulations Model Numbers EG54, EG73, EG76General Technical Data DimensionsCooker Hoods Space for FixingUnpacking the Cooker Levelling Connecting to GAS SupplyViewed from Rear Stability Bracket Electrical Installation Installation InstallationsOperational Checks Page Page Key Contacts