Canon 210 manual Using the Face Self-Timer, Lamp will blink and the self-timer sound will play

Using the Face Self-Timer

Changing the number of shots

After touching on the screen in Step 1, touch op to change the number of shots. Touch Ú to complete the setting.

•Shutting both eyes will also be detected as a wink.

•If a wink is not detected, the shutter will release approximately 15

seconds later.

• If there are no people in the shot when the shutter button is pressed fully, the camera will shoot after a person enters the shot and winks.

Using the Face Self-Timer

To take a photo that includes the photographer, such a group photo, compose the shot, and press the shutter button. The camera will shoot approximately two seconds after you enter the shot and it detects your face (p. 84).

Choose .

● Choose	in Steps 1 – 2 on p. 54, then
touch	.
● Touch	, then touch Ú.

Compose the shot and press the shutter button halfway.

●Make sure a green frame appears on the face focused on and white frames appear on other faces.

Press the shutter button fully.

X The camera will enter shooting stand-by, and [Look straight at camera to start count down] will appear on the screen.

XThe lamp will blink and the self-timer sound will play.

62