Canon 210 manual Active Display, Switching to Shooting mode, Tilt the camera to switch images

Viewing Images

Switching to Shooting mode

Pressing the shutter button halfway while in Playback mode switches the camera to Shooting mode.

Active Display

When an image is displayed, lightly tapping the camera as shown below will switch to the next image.

•Be sure to put the strap around your wrist, and hold the camera firmly to

avoid dropping it.

•Depending on the way you tap the camera, images may not switch.

Switch to next image Switch to previous image

Tilt the camera to switch images

If you touch and hold q at the left of the screen and tilt the camera as shown while switching through images, the images advance quickly. Tilt the camera in the opposite direction while holding r.

While dragging an image, if you touch and hold q or r the image will appear coarse.

29