Checking the Focus

You can magnify the area of a recorded image that was inside the AF Frame, or the area of a face that was detected, to check the focus.

Touch l to switch the focus check display (p. 43).

XA white frame will appear where the AF frame or face was when the focus was set.

XA gray frame will appear on a face detected during playback.

XThe area within the orange frame appears magnified.

Switch frames.

Move the zoom lever toward k once. X The screen shown to the left will appear.

Touch to move to a different frame when multiple frames appear.

Change the magnification level or location.

Moving the zoom lever, or touching the magnified image at the bottom right of the

screen, or will change the displayed magnification rate.

If you drag across the image on the lower right, you can move the location of the displayed area.

Touching Ú, or the image in the upper left resets the display to Step 1.

111

Page 111
Image 111
Canon 210 manual Checking the Focus, Touch l to switch the focus check display p, Switch frames, 111