127
Trimming
You can cut out a portion of a recorded image and save it as a new image
file.

Choose [Trimming].

●Touch ø, then n to choose the
1 tab, and touch [Trimming].
Choose an image.
●Drag horizontally across the screen to
choose an image, then touch [OK].

Adjust the trimming area.

XA frame will appear around the portion of
the image to be trimmed.
XThe original image will display in the upper
left and the trimmed image will display in
the lower right.
●If you move the zoom lever, touch
or the image at the bottom right of the
screen, you can change the frame size.
●If you drag on the image at the upper left
or the image at the bottom right, you can
move the frame.
●If you touch , you can change the
frame orientation.
●In an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch
between frames by touching .
●Touch [New File].
XThe [Save new image?] screen will
appear.
Save as a new image and display.
●Follow Steps 4 and 5 on p.126.
Recorded pixels
after trimming
Trimming Area
Trimming Area Display