Canon 210 manual Displaying the Overlay, Changing the IS-Mode Settings, 147

Changing Shooting Function Settings

Displaying the Overlay

You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for postcard size prints.

●Choose [Disp. Overlay], then touch qr to choose an option.

Grid Lines	A grid overlays the display.
	Gray bars will appear on the top
3:2 Guide	and bottom of the display. This
	area will not print when printing
	on paper with a 3:2 aspect ratio.
Both	Both grid lines, and the 3:2 guide
	will display.

•In mode, you cannot set [3:2 Guide] or [Both].

•Grid Lines will not be recorded on the image.

• The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas.

Changing the IS-Mode Settings

●Choose [IS Mode], then touch qr to choose an option.

	Image stabilization is always on.
	You can confirm the result
Continuous	directly on the display, which
	makes it easier to check the
	composition or focus.
Shoot Only	Image stabilization is only active
	at the moment of shooting.
	Image stabilization only counters
Panning	up and down motion. This option
	is recommended for shooting
	objects moving horizontally.

•If camera shake is too strong, attach the camera to a tripod. You should set the IS Mode to [Off] when the camera is attached to a tripod.

• When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically.

147