Sunbeam EM6200 manual Using the control panel, Power, Ready Mode, Manual, Single Espresso

Page 10

Using the control panel

Power

Press the ‘POWER’ button once to turn the espresso machine on. The light on the button will start flashing; this is to indicate that your espresso machine is on and is heating up.

Ready Mode

When the light on the ‘POWER’ button stops flashing and turns to a constant red light, this indicates that the espresso machine is heated and ready to use. The lights around the 'MANUAL', 'SINGLE', 'DOUBLE' and 'HOT WATER/STEAM' buttons will show a constant red light. The machine is now in Ready Mode.

Note: Remember that if the light on the ‘POWER’ button is flashing it means the espresso machine is adjusting the temperature of the heating system.

To turn the espresso machine off, simply press the ‘POWER’ button, the red power light and all other lights on the control panel will turn off.

Manual

Note: Before activating the espresso coffee function ensure that the steam and hot water control dial is in the OFF position.

The ‘MANUAL’ button allows the coffee maker to have complete control over the length of the espresso pour.

Once the espresso machine is switched on and heated, so the light on the ‘POWER’ button is red and the lights around the ‘MANUAL’, ‘SINGLE’ and ‘DOUBLE’ espresso buttons show a constant red light, the coffee maker is able to use the manual operation. The coffee maker simply needs to press the ‘MANUAL’ button once to start the pour and again to stop.

Important: Once the manual operation is activated, before the espresso pour starts the pre-infusion feature will release three short bursts of gradual water pressure onto the coffee cake. After this the full water pressure is applied and the espresso will pour freely.

Note: When the coffee maker has activated the ‘MANUAL’ operation the lights around the ‘SINGLE’ and ‘DOUBLE’ espresso buttons will go off. The lights on the ‘POWER’ and around the ‘MANUAL’ buttons will remain on.

Single Espresso

Note: Before activating the espresso coffee function ensure that the steam and hot water control dial is in the OFF position.

The ‘SINGLE’ espresso function removes the guesswork and is programmed to pour 30mls of liquid espresso.

Tip: We recommend using the single cup filter when using the programmed ‘SINGLE’ espresso operation.

Once the espresso machine is switched on and heated, so the light on the ‘POWER’ button is red and the lights around the ‘MANUAL’, ‘SINGLE’ and ‘DOUBLE’ espresso buttons show a constant red light, the coffee maker is able to use the ‘SINGLE’ espresso

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Espresso Vita Page Contents Important instructions retain for future useSunbeam’s Safety Precautions Safety Precautions for Your Sunbeam Espresso MachineAbout espresso coffee Warming plate Features of your Sunbeam Espresso VitaWater level indicator Push button control panelProgrammable control panel 600ml jug Cleaning toolEspresso gauge Steam and hot water control dial 5L water reservoirThermoblock Heating System Bar PumpCrema System Features of your Sunbeam Espresso Vita Optimum Pour Under Over ExtractedReady Mode Using the control panelPower ManualUsing the control panel Double EspressoProgramming the Single or Double pours SteamHot Water Reference guide to using your espresso machine Unit on Use. Ready Mode Warming the espresso cupsMaking the espresso Reference guide to using your espresso machinePlace group handle onto group head Texturing milk Press the Steam button to activate steam modeTurn off steam by turning dial clockwise Swing steam wand to the side of espresso machine Cleaning Programming Single Espresso Resetting the Factory SettingsProgramming your espresso machine Programming Double EspressoProgramming your espresso machine Preparing your espresso machine before use Preheat Group Handle and Filter Basket Guide to the perfect espressoPreheat Glasses Dosing and TampingPre-Infusion Eco Mode and Standby ModeGuide to the perfect espresso Caring for your Espresso MachineGuide to milk texturing Using the hot water function Guide to milk texturingEspresso Recipes 190mL cup Hot water to taste Single or double espressoEspresso Recipes Caffe LatteGroup head, group handle & filter baskets Care and CleaningDrip tray and grill Group head rubber sealCup warming plate and exterior Care and CleaningSteam wand Descaling Descaling solutionDescaling the espresso machine Descaling Espresso Thermoblock Temperature Press and hold down the ‘MANUAL’ buttonPlease refer to the chart below Steam Thermoblock TemperaturePress and hold down the ‘HOT WATER/ STEAM’ button Steam Wetness or Steam Pump Rate Steam Pump Rate ProgrammingSteam thermoblock temperatures and the steam pump rate Factory ResetAdvanced Programming Options Group handle Trouble shooting guideProblem Possible cause What to do No coffee runs throughTrouble shooting guide Coffee is too coldEspresso tastes burnt Uneven cup fillingLoad noise Australia Month Replacement GuaranteeNew Zealand Need help with your appliance?

EM6200 specifications

The Sunbeam EM6200 is a versatile and stylish espresso machine designed for coffee enthusiasts who value both performance and aesthetics. This compact unit combines advanced features with user-friendly operation, making it an ideal choice for home baristas and casual coffee drinkers alike.

One of the standout features of the Sunbeam EM6200 is its powerful 15-bar Italian pump, which ensures optimal pressure for extracting rich, flavorful espresso shots. This high pressure is crucial for producing a perfect crema, delivering a café-quality experience right in the comfort of your kitchen. The machine heats up quickly thanks to its stainless steel boiler, enabling users to brew in just a short time without sacrificing quality.

In terms of user interface, the EM6200 is equipped with a combination of manual controls and an easy-to-read LCD display. This allows users to select from various coffee options, adjust the coffee strength, and customize their brewing experience. The intuitive layout ensures that even beginners can enjoy a seamless brewing process.

The Sunbeam EM6200 also features a built-in steam wand for frothing milk. This allows users to create creamy lattes, cappuccinos, and macchiatos with ease. The steam wand is designed with a 360-degree rotation, providing flexibility in frothing techniques and simplifying the milk texturing process.

For coffee aficionados looking for flexibility, the EM6200 supports both ground coffee and E.S.E. pods. This versatility ensures that users can enjoy their favorite coffee varieties while also having the convenience of pre-packaged options. The machine comes with a removable drip tray and water reservoir, making cleanup and maintenance a breeze.

Additional attributes of the Sunbeam EM6200 include its sleek design, available in various finishes, which enhances any kitchen decor. The machine is also equipped with safety features such as an automatic shutdown, giving users peace of mind during use.

Overall, the Sunbeam EM6200 is a well-rounded espresso machine that combines modern technology with practical features. Its combination of functionality, ease of use, and elegant design makes it a popular choice for coffee lovers seeking to elevate their home brewing experience. Whether you are a novice or an experienced barista, the EM6200 is equipped to help you craft the perfect cup of coffee every time.
Top Page Image Contents