Sunbeam EM6200 manual Using the control panel, Double Espresso

Page 11

Using the control panel (continued)

operation. The coffee maker simply needs to press the ‘SINGLE’ espresso button once to start and the pour of liquid espresso will stop automatically.

Important: Once the ‘SINGLE’ espresso operation is activated, before the espresso pour starts the pre-infusion feature will release three short bursts of gradually increasing water pressure onto the coffee cake. After this the full water pressure is applied and the espresso will pour freely.

Note: When the coffee maker has activated the ‘SINGLE’ espresso operation the lights around the ‘MANUAL’ and ‘DOUBLE’ espresso buttons will go off. The lights on the ‘POWER’ and the ‘SINGLE’ espresso buttons will remain on.

Note: The coffee maker does not need to press the single espresso button again to end the pour as the espresso machine will stop automatically.

Once the pour of liquid espresso stops the espresso machine is ready to make another espresso.

Note: When using the single espresso operation you can stop the pour of espresso at any time by pressing the ‘MANUAL’, ‘SINGLE’, or ‘DOUBLE’ espresso operation buttons.

Double Espresso

Note: Before activating the espresso coffee function, ensure that the STEAM and HOT WATER control dial is in the OFF position.

The ‘DOUBLE’ espresso function removes the guesswork and is programmed to pour 60mls of liquid espresso.

Tip: We recommend using the double cup filter when using the programmed ‘DOUBLE’ espresso operation.

Once the espresso machine is switched on and heated, so the light on the ‘POWER’ button is red and the lights around the ‘MANUAL’, ‘SINGLE’, and ‘DOUBLE’ espresso buttons show a constant red light, the coffee maker is able to use the ‘DOUBLE’ espresso operation. The coffee maker simply needs to press the ‘DOUBLE’ espresso button once to start and the pour of liquid espresso will stop automatically.

Important: Once the ‘DOUBLE’ espresso operation is activated, before the espresso pour starts the pre-infusion feature will release three short bursts of gradually increasing water pressure onto the coffee cake. After this the full water pressure is applied and the espresso will pour freely.

Note: When the coffee maker has activated the ‘DOUBLE’ espresso operation the lights around the ‘MANUAL’ and ‘SINGLE’ buttons will go off. The lights on the ‘POWER’ and ‘DOUBLE’ espresso buttons will remain on.

Note: The coffee maker does not need to press the ‘DOUBLE’ espresso button again to end the pour as the espresso machine will stop automatically.

Once the pour of liquid espresso stops the espresso machine is ready to make another espresso.

Note: When using the ‘DOUBLE’ espresso operation you can stop the pour of espresso at any time by pressing the ‘MANUAL’, ‘SINGLE’ or ‘DOUBLE’ espresso operation buttons.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Espresso Vita Page Important instructions retain for future use ContentsSafety Precautions for Your Sunbeam Espresso Machine Sunbeam’s Safety PrecautionsAbout espresso coffee Push button control panel Features of your Sunbeam Espresso VitaWater level indicator Warming plateSteam and hot water control dial 5L water reservoir 600ml jug Cleaning toolEspresso gauge Programmable control panelCrema System Bar PumpThermoblock Heating System Optimum Pour Under Over Extracted Features of your Sunbeam Espresso VitaManual Using the control panelPower Ready ModeDouble Espresso Using the control panelSteam Programming the Single or Double poursHot Water Unit on Use. Ready Mode Warming the espresso cups Reference guide to using your espresso machinePlace group handle onto group head Reference guide to using your espresso machineMaking the espresso Turn off steam by turning dial clockwise Press the Steam button to activate steam modeTexturing milk Swing steam wand to the side of espresso machine Cleaning Programming Double Espresso Resetting the Factory SettingsProgramming your espresso machine Programming Single EspressoProgramming your espresso machine Preparing your espresso machine before use Dosing and Tamping Guide to the perfect espressoPreheat Glasses Preheat Group Handle and Filter BasketCaring for your Espresso Machine Eco Mode and Standby ModeGuide to the perfect espresso Pre-InfusionGuide to milk texturing Guide to milk texturing Using the hot water function190mL cup Hot water to taste Single or double espresso Espresso RecipesCaffe Latte Espresso RecipesGroup head rubber seal Care and CleaningDrip tray and grill Group head, group handle & filter basketsSteam wand Care and CleaningCup warming plate and exterior Descaling the espresso machine Descaling solutionDescaling Descaling Press and hold down the ‘MANUAL’ button Espresso Thermoblock TemperaturePress and hold down the ‘HOT WATER/ STEAM’ button Steam Thermoblock TemperaturePlease refer to the chart below Steam Pump Rate Programming Steam Wetness or Steam Pump RateAdvanced Programming Options Factory ResetSteam thermoblock temperatures and the steam pump rate No coffee runs through Trouble shooting guideProblem Possible cause What to do Group handleCoffee is too cold Trouble shooting guideLoad noise Uneven cup fillingEspresso tastes burnt New Zealand Month Replacement GuaranteeAustralia Need help with your appliance?

EM6200 specifications

The Sunbeam EM6200 is a versatile and stylish espresso machine designed for coffee enthusiasts who value both performance and aesthetics. This compact unit combines advanced features with user-friendly operation, making it an ideal choice for home baristas and casual coffee drinkers alike.

One of the standout features of the Sunbeam EM6200 is its powerful 15-bar Italian pump, which ensures optimal pressure for extracting rich, flavorful espresso shots. This high pressure is crucial for producing a perfect crema, delivering a café-quality experience right in the comfort of your kitchen. The machine heats up quickly thanks to its stainless steel boiler, enabling users to brew in just a short time without sacrificing quality.

In terms of user interface, the EM6200 is equipped with a combination of manual controls and an easy-to-read LCD display. This allows users to select from various coffee options, adjust the coffee strength, and customize their brewing experience. The intuitive layout ensures that even beginners can enjoy a seamless brewing process.

The Sunbeam EM6200 also features a built-in steam wand for frothing milk. This allows users to create creamy lattes, cappuccinos, and macchiatos with ease. The steam wand is designed with a 360-degree rotation, providing flexibility in frothing techniques and simplifying the milk texturing process.

For coffee aficionados looking for flexibility, the EM6200 supports both ground coffee and E.S.E. pods. This versatility ensures that users can enjoy their favorite coffee varieties while also having the convenience of pre-packaged options. The machine comes with a removable drip tray and water reservoir, making cleanup and maintenance a breeze.

Additional attributes of the Sunbeam EM6200 include its sleek design, available in various finishes, which enhances any kitchen decor. The machine is also equipped with safety features such as an automatic shutdown, giving users peace of mind during use.

Overall, the Sunbeam EM6200 is a well-rounded espresso machine that combines modern technology with practical features. Its combination of functionality, ease of use, and elegant design makes it a popular choice for coffee lovers seeking to elevate their home brewing experience. Whether you are a novice or an experienced barista, the EM6200 is equipped to help you craft the perfect cup of coffee every time.
Top Page Image Contents