Sunbeam EM6200 manual Preparing your espresso machine before use

Page 21

Preparing your espresso machine before use

1.Place the espresso machine onto a dry, stable benchtop.

2.Ensure the drip tray and grill are in place.

3.Fill the espresso machine with water. To do so, ensure the group handle has been taken out of the group head and swing the steam want to the right, out of the way. Then using the handle at the front of the water reservoir simply slide out the reservoir from the front of the espresso machine (1). Then fill with fresh cold water or filtered water (2). Replace the water reservoir firmly by sliding it back into place

(3).

4.Insert the power cord into a 230-240V AC power outlet and switch the power on. Press the ‘POWER’ button once to turn the espresso machine on (4). The light on the ‘POWER’ button will illuminate red and start flashing. This is to indicate that your espresso machine is on and is heating up.

When the red light on the ‘POWER’ button stops flashing and turns to a constant red light, this indicates that the espresso machine is heated and ready to use. The lights around the ‘MANUAL’, ‘SINGLE’, ‘DOUBLE’, ‘STEAM’ and ‘HOT WATER’ buttons will also show a constant red light

(5). When the control panel is lit in this way, this indicates that the machine is in ready mode.

5.Place glasses and cups on the warming plate (6).

Important: For first time use or if the machine has not been used for some time, it is important that the machine is rinsed as follows:

6.Fit the group handle with either the single or double filter basket (7). Secure the group handle to the group head (8) (9).

7.Place a sufficiently large container under both pouring spouts (10).

8.Once the espresso machine is switched on and heated, so the light on the ‘POWER’ button is red and the lights around the ‘MANUAL’, ‘SINGLE’, ‘DOUBLE’ and ‘HOT WATER’ buttons show a constant red light, the espresso machine is heated and ready to use.

Tip: Remember if the ‘POWER’ light is flashing red, this indicates that the espresso machine is on and is heating up.

9.Press the ‘MANUAL’ button (11) and allow the water to run through until the water reservoir is empty.

Note: You will need to press the ‘MANUAL’ button again to stop the water flow. It does not happen automatically.

19

Image 21
Contents Espresso Vita Page Important instructions retain for future use ContentsSafety Precautions for Your Sunbeam Espresso Machine Sunbeam’s Safety PrecautionsAbout espresso coffee Water level indicator Features of your Sunbeam Espresso VitaWarming plate Push button control panelEspresso gauge 600ml jug Cleaning toolProgrammable control panel Steam and hot water control dial 5L water reservoirBar Pump Thermoblock Heating SystemCrema System Optimum Pour Under Over Extracted Features of your Sunbeam Espresso VitaPower Using the control panelReady Mode ManualDouble Espresso Using the control panelSteam Programming the Single or Double poursHot Water Unit on Use. Ready Mode Warming the espresso cups Reference guide to using your espresso machineReference guide to using your espresso machine Making the espressoPlace group handle onto group head Press the Steam button to activate steam mode Texturing milkTurn off steam by turning dial clockwise Swing steam wand to the side of espresso machine Cleaning Programming your espresso machine Resetting the Factory SettingsProgramming Single Espresso Programming Double EspressoProgramming your espresso machine Preparing your espresso machine before use Preheat Glasses Guide to the perfect espressoPreheat Group Handle and Filter Basket Dosing and TampingGuide to the perfect espresso Eco Mode and Standby ModePre-Infusion Caring for your Espresso MachineGuide to milk texturing Guide to milk texturing Using the hot water function190mL cup Hot water to taste Single or double espresso Espresso RecipesCaffe Latte Espresso RecipesDrip tray and grill Care and CleaningGroup head, group handle & filter baskets Group head rubber sealCare and Cleaning Cup warming plate and exteriorSteam wand Descaling solution DescalingDescaling the espresso machine Descaling Press and hold down the ‘MANUAL’ button Espresso Thermoblock TemperatureSteam Thermoblock Temperature Please refer to the chart belowPress and hold down the ‘HOT WATER/ STEAM’ button Steam Pump Rate Programming Steam Wetness or Steam Pump RateFactory Reset Steam thermoblock temperatures and the steam pump rateAdvanced Programming Options Problem Possible cause What to do Trouble shooting guideGroup handle No coffee runs throughCoffee is too cold Trouble shooting guideUneven cup filling Espresso tastes burntLoad noise Month Replacement Guarantee AustraliaNew Zealand Need help with your appliance?

EM6200 specifications

The Sunbeam EM6200 is a versatile and stylish espresso machine designed for coffee enthusiasts who value both performance and aesthetics. This compact unit combines advanced features with user-friendly operation, making it an ideal choice for home baristas and casual coffee drinkers alike.

One of the standout features of the Sunbeam EM6200 is its powerful 15-bar Italian pump, which ensures optimal pressure for extracting rich, flavorful espresso shots. This high pressure is crucial for producing a perfect crema, delivering a café-quality experience right in the comfort of your kitchen. The machine heats up quickly thanks to its stainless steel boiler, enabling users to brew in just a short time without sacrificing quality.

In terms of user interface, the EM6200 is equipped with a combination of manual controls and an easy-to-read LCD display. This allows users to select from various coffee options, adjust the coffee strength, and customize their brewing experience. The intuitive layout ensures that even beginners can enjoy a seamless brewing process.

The Sunbeam EM6200 also features a built-in steam wand for frothing milk. This allows users to create creamy lattes, cappuccinos, and macchiatos with ease. The steam wand is designed with a 360-degree rotation, providing flexibility in frothing techniques and simplifying the milk texturing process.

For coffee aficionados looking for flexibility, the EM6200 supports both ground coffee and E.S.E. pods. This versatility ensures that users can enjoy their favorite coffee varieties while also having the convenience of pre-packaged options. The machine comes with a removable drip tray and water reservoir, making cleanup and maintenance a breeze.

Additional attributes of the Sunbeam EM6200 include its sleek design, available in various finishes, which enhances any kitchen decor. The machine is also equipped with safety features such as an automatic shutdown, giving users peace of mind during use.

Overall, the Sunbeam EM6200 is a well-rounded espresso machine that combines modern technology with practical features. Its combination of functionality, ease of use, and elegant design makes it a popular choice for coffee lovers seeking to elevate their home brewing experience. Whether you are a novice or an experienced barista, the EM6200 is equipped to help you craft the perfect cup of coffee every time.