Care and Cleaning (continued)
On a monthly basis we recommend thoroughly cleaning the steam wand/arm. To do this soak the wand/arm in water, ensure that the water level in the jug is over the wand/arm. Run steam through the wand/arm for 30 seconds, then leave to soak overnight. In the morning turn the machine on and run steam through the wand/arm again for 30 seconds.
Important: Do not wash parts in the dishwasher. Do not immerse the unit in water.
Important: Should your steam wand/arm become blocked, supplied with your espresso
machine is a cleaning wire. The cleaning wire for the steam arm is the long BLACK pin, located on the underside of the water reservoir lid (22). With the cleaning wire insert it into the hole in the base of the steam wand/arm (23). Should the steam wand/arm remain blocked, using the measuring spoon/tamp unscrew the steam nozzle from the steam arm (24). Clean the steam nozzle by once again using the cleaning wire and then flush under running water.
17