Denon DN-A7100 manual Hdmi Jack, Connecting Hdmi Devices

Page 22

ENGLISH

HDMI JACK

This unit has two HDMI inputs and one HDMI output. It can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed.

Select an input source from the OSD menu system. (See page 20)

Notes:

•When the HDMI output is connected to a display monitor that does not support HDCP, signals are not output. To view images in HDMI, it is necessary to connect to a display that supports HDCP.

•There may be no image output if connected to a TV or display that is not compatible with the above format.

•Refer to the instruction manual of the TV or display to be connected to the DN-A7100 for detailed information regarding the HDMI terminal.

*HDCP: High-bandwidth Digital Content Protection

CONNECTING HDMI DEVICES

An HDMI cable (sold separately) is used to connect the HDMI jack on the DN-A7100 with the HDMI jack on a DVD player, TV, projector or other component. To transmit multichannel audio via HDMI, the connected player must support multichannel audio transmission through its HDMI jack.

HDMI video streaming is compatible with DVI in principle. Therefore, it is possible to connect to a TV or monitor that has a DVI terminal using an HDMI-DVI conversion cable or plug. When connecting to a DVI terminal, connect the audio signal separately.

Notes:

•Some HDMI components can be controlled over the HDMI cable, but this receiver cannot control other components this way.

•When connected to a monitor (i.e., TV, projector, etc.) that does not support HDCP, video and audio are not output.

•DVI cables come with 24-pin and 29-pin plugs. This receiver supports 24-pin DVI-D cables; 29-pin DVI cables cannot connect to it.

•Some source devices such as DVD players does not support HDMI repeater like those of the DN-A7100. In such case, pictures are not properly projected on monitors such as TVs and projectors.

•When multiple components are connected to this receiver, turn power to unused components off to prevent interference between them.

•Disconnecting or connecting cables with the power on can damage the equipment. Turn the power off before disconnecting or connecting cables.

•Some DVD-Audio disks disable downmixing. These types of disks are not played back correctly unless the left, center, right and surround left and right speakers, and subwoofer are connected.

•If a DVD player that does not support HDMI 1.1 is connected to the DN-A7100, multi channel PCM playback is not possible even with DVD-Audio disks.

•If a DVD player or other device with DVI output is connected to the DN-A7100, a separate audio cable (optical-digital, coaxial digital or analog) is needed for the audio signals. In this case, select the connected audio input as explained in “1 INPUT SETUP”. (See page 20)

•Multi channel PCM signals and audio signals of 62 kHz or higher that are input from the HDMI jack are not output from the DIGITAL OUT jacks.

•Depending on the quiality of the cable used, the HDMI signal may be affected by noise.

•Audio units that use sampling frequencies of 128 kHz and above are not supported.

DVD player

VIDEO PROJECTOR

HDMI OUTPUT

HDMI INPUT

Satellite Tuner

HDMI OUTPUT

18

Page 21 Page 23
Image 22
Page 21 Page 23
Contents DN-A7100 Français EnglishDeutsch ItalianoWarnhinweise EnglishDeutsch FrançaisWaarschuwingen AvvertenzeAdvertencias AdvertênciasTable of Contents Foreword Introduction RecyclingNeo6 offers several important improvements as follow DescriptionAbout Dolby Pro Logic Features AccessoriesFront Panel FL Display Rear Panel TV, DVD, VCR, DSS/VCR26AUX1 Video / Digital Audio Input 4AUX1 analog audio input level switch -10dBV/+4dBu5AUX1 analog audio input jacks L/R 7RS-232CRemote Control Operation Function and Operation¤1 MEMO/HT-EQ button ¤3 Tuning +/- buttons¤5 Volume +/- buttons ¤2 A/D buttonLoading Batteries Operation of Remote Control UnitRemote control unit RC-1065 May not be possibleAMP Mode General Information of RC-1065 to DN-A7100Connections Speaker PlacementHeight of the Speaker Units XLR terminals are used for balanced inputs Connecting SpeakersConnecting a Subwoofer OutputsConnecting Audio Components Connecting Digital Audio ComponentsVideo jack Connecting Video ComponentsVIDEO, S-VIDEO , Component Jacks Component jackConnecting Multi Channel Audio Source Advanced ConnectingConnecting AN External Power Amplifier Connecting AN FM Outdoor Antenna Connecting the Antenna TerminalsConnecting the Supplied Antennas Connecting AN AM Outdoor AntennaHdmi Jack Connecting Hdmi DevicesSelect an input source from the OSD menu system. See Setup On Screen Display Menu SystemSpeaker Setup Speakers SizeLPF/HPF Speakers DistanceSURR. Back Size Bass MIXPreference SurroundCH Input Level CS II Circle Surround II ParameterRelation of the speakers number and conectted speaker Simple SetupRelation of the room size and floor space Video Convert Basic OperationSelecting AN Input Source Example DVDAdjusting the Main Volume Selecting the Surround ModeAdjusting the Tone Bass & Treble Using the Sleep Timer ControlSurround Mode Stereo CSII-Mono modeVirtual Source DirectCenter speaker AbbreviationsFront speakers SL/SR Surround speakersTV Auto ON/OFF Function Listening Through HeadphonesOther Function Video ON/OFFCH Input Recording AN Analog SourceHT-EQ Home Theater Equalizer This permits simultaneous viewing with video sourcesLIP.SYNC AUX2 InputListening to the Tuner Auto Preset Memory Preset MemoryFM Tuning Mode Auto Stereo or Mono Manual Preset MemoryYou can remove preset stations from the memory Sorting Preset StationsName Input of the Preset Station → B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a UP →RDS Display RDS OperationRadio Text Programme Type PTY DisplayTroubleshooting Symptom Cause RemedyGlobal Description RS-232C Control SpecificationDetailed Description Transaction Sequences and the Regulations Examples of handshaking error Recommendations of COMMAND, Status and Layer DefinitionExamples of the handshaking flowchart Example of successful handshakingRecommendations of COMMAND, Status and Layer Normal Command listSpecific Commands Status Request and Status Answer List Normal Status request and Status answer and feedback listTechnical Specifications DimensionsHoldings Inc

DN-A7100 specifications

The Denon DN-A7100 is a versatile, high-performance audio amplifier designed for various professional and home audio applications. Known for its robust build quality and impressive technical specifications, it serves as an ideal solution for those seeking to enhance their sound experience.

One of the standout features of the DN-A7100 is its power output. Delivering up to 150 watts per channel into 8 ohms and 200 watts into 4 ohms, it ensures dynamic and clear audio performance, capable of driving a wide range of speakers. The amplifier utilizes a Class D design, which not only provides high efficiency but also minimizes heat generation. This characteristic makes it suitable for extended usage without risking thermal overload.

The DN-A7100 integrates advanced digital signal processing (DSP) technology that allows for a rich array of sound tailoring options. Users can take advantage of various EQ settings and audio presets to customize the sound to their preferences or the acoustics of their environment. This flexibility is particularly valuable in live sound situations or in home theater setups where room dynamics significantly affect audio quality.

Connectivity is another strong point of the DN-A7100. It features multiple inputs, including balanced XLR, RCA, and digital inputs, facilitating easy integration with different sound sources. Additionally, the amplifier supports both stereo and bridged mode operation, allowing for versatile application in various configurations.

Furthermore, the DN-A7100 incorporates built-in protection circuits that safeguard against overloading, overheating, and short circuits. These safety features ensure that the amplifier operates reliably over time, preserving both its functionality and the integrity of connected audio equipment.

An intuitive front panel further enhances user experience, featuring a clear LCD display that provides easy access to settings and functions. The unit also supports remote control operation, allowing for flexible adjustments without needing to be physically present at the unit.

In summary, the Denon DN-A7100 is a powerful audio amplifier that excels in performance and adaptability. With its robust power output, advanced DSP capabilities, numerous connectivity options, and user-friendly features, it is an excellent choice for both audio professionals and home enthusiasts looking to elevate their audio experience. Whether in a professional sound environment or a home theater setup, the DN-A7100 delivers exceptional sound quality and reliable performance.
Top Page Image Contents