Denon DN-A7100 manual Table of Contents Foreword Introduction, Recycling

TABLE OF CONTENTS

FOREWORD

INTRODUCTION

FOREWORD	1
EQUIPMENT MAINS WORKING SETTING	1
COPYRIGHT	1
INTRODUCTION	1
A NOTE ABOUT RECYCLING	1
DESCRIPTION	2
FEATURES	3
ACCESSORIES	3

BASIC OPERATION (PLAYBACK)	25
SELECTING AN INPUT SOURCE	25
VIDEO CONVERT	25
SELECTING THE SURROUND MODE	26
ADJUSTING THE MAIN VOLUME	26
ADJUSTING THE TONE (BASS & TREBLE) CONTROL	26
TEMPORARILY TURNING OFF THE SOUND	26
USING THE SLEEP TIMER	26
NIGHT MODE	26

This section must be read before any connection is made to the mains supply.

EQUIPMENT MAINS WORKING SETTING

Your DENON product has been prepared to comply with the household power and safety requirements that exist in your area.

DN-A7100 can be powered by 230V AC only.

Thank you for purchasing the DENON DN-A7100 Surround receiver.

This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the DN-A7100.

As there are a number of connection and configuration options, you are encouraged to discuss your own particular home theater setup with your DENON A/V specialist dealer.

ENGLISH

FRONT PANEL	4
FL DISPLAY	5
REAR PANEL	6
REMOTE CONTROL OPERATION	8
FUNCTION AND OPERATION	8
OPERATION OF REMOTE CONTROL UNIT	10
GENERAL INFORMATION OF RC-1065
TO DN-A7100	11

SURROUND MODE	27
OTHER FUNCTION	30
TV AUTO ON/OFF FUNCTION	30
ATTENUATION TO ANALOG INPUT SIGNAL	30
LISTENING THROUGH HEADPHONES	30
VIDEO ON/OFF	30
DISPLAY MODE	30
SELECTING ANALOG AUDIO INPUT OR
DIGITAL AUDIO INPUT	30

COPYRIGHT

Recording and playback of any material may require consent. For further information refer to the following:

—Copyright Act 1956

—Dramatic and Musical Performers Act 1958

—Performers Protection Acts 1963 and 1972

—Any subsequent statutory enactments and orders

A NOTE ABOUT

RECYCLING

CONNECTIONS		12
SPEAKER PLACEMENT		12
CONNECTING SPEAKERS		13
CONNECTING AUDIO COMPONENTS		14
CONNECTING VIDEO COMPONENTS		15
ADVANCED CONNECTING		16
CONNECTING THE ANTENNA TERMINALS		17
SETUP		19
ON SCREEN DISPLAY MENU SYSTEM		19
1	INPUT SETUP (ASSIGNABLE DIGITAL INPUT
AND COMPONENT VIDEO INPUT)		20
2	SPEAKER SETUP	20
3	PREFERENCE	22
4	SURROUND	22
5	PL II (PRO LOGIC II) MUSIC PARAMETER	23
6	CS II (CIRCLE SURROUND II) PARAMETER	23
7	7.1 CH INPUT LEVEL	23

RECORDING AN ANALOG SOURCE	31
HT-EQ (HOME THEATER EQUALIZER)	31
7.1 CH INPUT	31
AUX2 INPUT	32
LIP.SYNC	32
BASIC OPERATION (TUNER)	32
LISTENING TO THE TUNER	32
PRESET MEMORY	33
RDS OPERATION	35
TROUBLESHOOTING	36
RS-232C CONTROL SPECIFICATION....	37
GLOBAL DESCRIPTION	37
DETAILED DESCRIPTION	37
RECOMMENDATIONS OF COMMAND,
STATUS AND LAYER DEFINITION	39
RECOMMENDATIONS OF COMMAND,
STATUS AND LAYER	40

CAUTIONS ON INSTALLATION

For heat dispersal, leave at least 0.2 m/8 inch of space between the top, back and sides of this unit and the wall or other components.

• Do not obstruct the ventilation holes.

	0.2 m (8 ins.)
0.2 m	0.2 m
(8 ins.)	(8 ins.)

0.2 m (8 ins.)

This product’s packaging materials are recyclable and can be reused. This product and the accessories packed together are the applicable product to the WEEE directive except batteries.

Please dispose of any materials in accordance with your local recycling regulations.

When discarding the unit, comply with your local rules or regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

SIMPLE SETUP	24	TECHNICAL SPECIFICATIONS	43
		DIMENSIONS	43

1