Denon DN-A7100 manual Other Function, TV Auto ON/OFF Function, Video ON/OFF

Page 34

ENGLISH

OTHER FUNCTION

TV AUTO ON/OFF FUNCTION

This function allows the component connected to the TV-VIDEO in jack to control the power (ON/OFF) to the DN-A7100.

AUTO POWER ON

1. Be sure the TV auto mode is ENABLED. (Refer page 22 : System Setup)

2. Connect your TV TUNER (etc) to the TV- VIDEO in terminal. Be sure to connect the VIDEO input.

3. Turn OFF the power to the TV TUNER and the DN-A7100.

4. Turn ON the TV TUNER and tune in a receivable station.

5. When the station is received, the DN-A7100 turns ON and TV is selected automatically.

ATTENUATION TO ANALOG INPUT SIGNAL

If the selected analog audio input signal is greater than the capable level of internal processing, the “PEAK” indicator will light up on the front display. If this happens, you should press the ATT button on the remote.

“ATT” indicator will be illuminated when this function is activated. The signal-input level is reduced by about half. Attenuation will not work with the output signal of TAPE-OUT, CD-R/MD-OUT and VCR- OUT.

This function is memorized for each individual input source.

VIDEO ON/OFF

When no video signal is connected to the DN-A7100 or a DVD, etc., is connected directly to your TV, the unnecessary video circuit can be turned off by selecting the “VIDEO OFF” setting.

To select video off, press the AMP button and press the V-OFFbutton.

DISPLAY MODE

SELECTING ANALOG AUDIO INPUT OR

DIGITAL AUDIO INPUT

If you have already assigned the digital inputs, you can temporarily select the audio input mode for each input source as following procedures.

Press the AMP button and press the A/D button. When this button is pressed, the input mode is switched in the following sequence.

AUTO POWER OFF

1. In the above situation, turn the TV TUNER OFF or select a channel that does not contain any broadcast.

2. The power to the DN-A7100 switches to STANDBY after approx. 5 minutes.

Notes:

•AUTO POWER OFF is canceled if the DN-A7100 is set to a source other than TV.

The function reactivates when TV is selected again.

•Some TV broadcasts may cause the TV AUTO FUNCTION to turn ON.

•The S-Video terminal does not support “TV AUTO ON/OFF” function.

LISTENING THROUGH HEADPHONES

This jack may be used to listen to the DN-A7100’s output through a pair of headphones. Be certain that the headphones have a standard 1/4” stereo phono plug.

You can select the display mode for the front display of the DN-A7100.

To select this mode, press the DISPLAY on the remote control.

When this button is pressed, the display mode is switched in the following sequence.

→Surround Mode → Auto-display Off → Display Off

→Input Function → Surround Mode....

In Auto display off mode, the display is off. But, if you make a change to the unit such as input or surround mode, the display will show that change, then go back to off after about 3 seconds. When changing the volume, it is not displayed.

In Display off mode, the display is off completely.

Note:

Only the DISP indicator will be illuminated on the front display in display off condition

→HDMI Auto → HDMI → Digital Auto → Digital

→Analog → HDMI Auto....

In HDMI Auto mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected automatically.

If no digital signal is being input, the analog input jacks are selected automatically.

In Digital and HDMI mode, input is fixed to an assigned digital input terminal.

In analog mode, the analog input jacks are selected. This selecting is temporary, so the result will not be stored in memory.

If you need to change the input mode completely, use INPUT SETUP in OSD menu system. (see page 20)

30

Page 33 Page 35
Image 34
Page 33 Page 35
Contents DN-A7100 Français EnglishDeutsch ItalianoWarnhinweise EnglishDeutsch FrançaisWaarschuwingen AvvertenzeAdvertencias AdvertênciasTable of Contents Foreword Introduction RecyclingNeo6 offers several important improvements as follow DescriptionAbout Dolby Pro Logic Features AccessoriesFront Panel FL Display Rear Panel TV, DVD, VCR, DSS/VCR26AUX1 Video / Digital Audio Input 4AUX1 analog audio input level switch -10dBV/+4dBu5AUX1 analog audio input jacks L/R 7RS-232CRemote Control Operation Function and Operation¤1 MEMO/HT-EQ button ¤3 Tuning +/- buttons¤5 Volume +/- buttons ¤2 A/D buttonLoading Batteries Operation of Remote Control UnitRemote control unit RC-1065 May not be possibleAMP Mode General Information of RC-1065 to DN-A7100Connections Speaker PlacementHeight of the Speaker Units XLR terminals are used for balanced inputs Connecting SpeakersConnecting a Subwoofer OutputsConnecting Audio Components Connecting Digital Audio ComponentsVideo jack Connecting Video ComponentsVIDEO, S-VIDEO , Component Jacks Component jackConnecting Multi Channel Audio Source Advanced ConnectingConnecting AN External Power Amplifier Connecting AN FM Outdoor Antenna Connecting the Antenna TerminalsConnecting the Supplied Antennas Connecting AN AM Outdoor AntennaHdmi Jack Connecting Hdmi DevicesSelect an input source from the OSD menu system. See Setup On Screen Display Menu SystemSpeaker Setup Speakers SizeLPF/HPF Speakers DistanceSURR. Back Size Bass MIXPreference SurroundCH Input Level CS II Circle Surround II ParameterRelation of the speakers number and conectted speaker Simple SetupRelation of the room size and floor space Video Convert Basic OperationSelecting AN Input Source Example DVDAdjusting the Main Volume Selecting the Surround ModeAdjusting the Tone Bass & Treble Using the Sleep Timer ControlSurround Mode Stereo CSII-Mono modeVirtual Source DirectCenter speaker AbbreviationsFront speakers SL/SR Surround speakersTV Auto ON/OFF Function Listening Through HeadphonesOther Function Video ON/OFFCH Input Recording AN Analog SourceHT-EQ Home Theater Equalizer This permits simultaneous viewing with video sourcesLIP.SYNC AUX2 InputListening to the Tuner Auto Preset Memory Preset MemoryFM Tuning Mode Auto Stereo or Mono Manual Preset MemoryYou can remove preset stations from the memory Sorting Preset StationsName Input of the Preset Station → B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a UP →RDS Display RDS OperationRadio Text Programme Type PTY DisplayTroubleshooting Symptom Cause RemedyGlobal Description RS-232C Control SpecificationDetailed Description Transaction Sequences and the Regulations Examples of handshaking error Recommendations of COMMAND, Status and Layer DefinitionExamples of the handshaking flowchart Example of successful handshakingRecommendations of COMMAND, Status and Layer Normal Command listSpecific Commands Status Request and Status Answer List Normal Status request and Status answer and feedback listTechnical Specifications DimensionsHoldings Inc

DN-A7100 specifications

The Denon DN-A7100 is a versatile, high-performance audio amplifier designed for various professional and home audio applications. Known for its robust build quality and impressive technical specifications, it serves as an ideal solution for those seeking to enhance their sound experience.

One of the standout features of the DN-A7100 is its power output. Delivering up to 150 watts per channel into 8 ohms and 200 watts into 4 ohms, it ensures dynamic and clear audio performance, capable of driving a wide range of speakers. The amplifier utilizes a Class D design, which not only provides high efficiency but also minimizes heat generation. This characteristic makes it suitable for extended usage without risking thermal overload.

The DN-A7100 integrates advanced digital signal processing (DSP) technology that allows for a rich array of sound tailoring options. Users can take advantage of various EQ settings and audio presets to customize the sound to their preferences or the acoustics of their environment. This flexibility is particularly valuable in live sound situations or in home theater setups where room dynamics significantly affect audio quality.

Connectivity is another strong point of the DN-A7100. It features multiple inputs, including balanced XLR, RCA, and digital inputs, facilitating easy integration with different sound sources. Additionally, the amplifier supports both stereo and bridged mode operation, allowing for versatile application in various configurations.

Furthermore, the DN-A7100 incorporates built-in protection circuits that safeguard against overloading, overheating, and short circuits. These safety features ensure that the amplifier operates reliably over time, preserving both its functionality and the integrity of connected audio equipment.

An intuitive front panel further enhances user experience, featuring a clear LCD display that provides easy access to settings and functions. The unit also supports remote control operation, allowing for flexible adjustments without needing to be physically present at the unit.

In summary, the Denon DN-A7100 is a powerful audio amplifier that excels in performance and adaptability. With its robust power output, advanced DSP capabilities, numerous connectivity options, and user-friendly features, it is an excellent choice for both audio professionals and home enthusiasts looking to elevate their audio experience. Whether in a professional sound environment or a home theater setup, the DN-A7100 delivers exceptional sound quality and reliable performance.
Top Page Image Contents