Denon DN-A7100 manual Technical Specifications, Dimensions

GENERAL MALFUNCTION

If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore:

-disconnect the plug from the AC line supply

-after waiting at least three minutes, reconnect the plug to the AC line supply

-re-attempt to operate the equipment

Memory backup

•In case a power outage occurs or the power cord is accidentally unplugged, the DN- A7100 is equipped with a backup function to prevent memory data such as the preset memory from being erased.

HOW TO RESET THE UNIT

Should the operation or display seem to be abnormal, reset the unit with the following procedure.

To turn on the DN-A7100, press and hold the CLEAR and KEY-LOCKbuttons simultaneously for 3 seconds or more.

Remember that the procedure will reset the settings of the SOURCE, Surround mode, delay time, TUNER PRESET etc., to their initial settings.

TECHNICAL

SPECIFICATIONS

FM TUNER SECTION
Frequency Range		87.5 – 108.0 MHz
Usable Sensitivity		IHF 1.8 µV/16.4 dBf
Signal to Noise Ratio		Mono/Stereo 75/70 dB
Distortion		Mono/Stereo 0.2/0.3 %
Stereo Separation		1 kHz 45 dB
Alternate Channel Selectivity		± 300 kHz 60 dB
Image Rejection		98 MHz 70 dB
Tuner Output Level	1 kHz, ± 75 kHz Dev 800 mV
AM TUNER SECTION
Frequency Range		531 – 1602 kHz
Signal to Noise Ratio		50 dB
Usable Sensitivity		Loop 400mV/m
Distortion		400Hz, 30 % Mod. 0.5 %
Selectivity		± 20 kHz 70 dB
AUDIO SECTION
Input Sensitivity/Impedance (volume at 0dB)
(RCA connectors)		220 mV/ 20 kohms
(XLR connectors)
(+4dBu)		440 mV/ 20 kohms
(-10dBV)		110 mV/ 20 kohms
Output Level (volume at 0dB)
(+4dBu)		300 mVrms typ.
(-10dBV)		75 mVrms typ.
Signal to Noise Ratio(Analog Input / Pure Direct)... 98 dB
Frequency Response
(Analog Input / Pure Direct)	.......	10 Hz – 90 kHz (± 3 dB)
THD		0.03 %
Cross Talk		80 dB (at 1kHz)
VIDEO
Television Format		NTSC/PAL
Input Level/Impedance		1 Vp-p/75 ohms
Output Level/Impedance		1 Vp-p/75 ohms
Video Frequency Response		5 Hz to 8 MHz (– 1 dB)
Video Frequency (Component)...		5 Hz to 80 MHz (– 1 dB)
S/N		60 dB
GENERAL
Power Requirement		AC 230 V 50 Hz
Power Consumption		40 W
Weight		7.66 Kg
ACCESSORIES
Remote Control Unit RC-1065		1
AAA-size batteries		2
FM Antenna		1
AM Loop Antenna		1
AC Power Cord		1
Service Station List		1
User guide		1

Specifi cations subject to change without prior notice.

DIMENSIONS

482.6 mm (19 ins.)

11 mm (7/16 ins.)

324.85 mm (12-3/4 ins.) 353.85 mm (13-7/8 ins.)

18 mm	(3/4 ins.)
132.6 mm	(5-1/4 ins.)	140.8 mm (5-1/2 ins.)
8.2 mm	(5/16 ins.)

ENGLISH

43