Denon 483, AVR-1403 manual Setting UP the System, Use the following buttons to set up the system

ENGLISH

10

SETTING UP THE SYSTEM

•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 9 to 14), make the various settings described below on the display.

These settings are required to set up the listening room’s AV system centered around the this unit.

1	Set the slide switch to “AUDIO”.
		CD MD/CDR

AUDIO

VIDEO

2	Use the following buttons to set up the system:
	VIDEO SELECT CD·MD/CDR·DVD/VDP			DISC SKIP+
	TITLE
	8	3	9
	6	2		7
	SYSTEM	SURROUND
	SET UP		MENU	MASTER
	CH SELECT			VOL
	SELECT
	T.TONE		STATUS	MUTING
	RETURN		DISPLAY

SYSTEM SETUP button

Press this to display the system setup on the display.

CURSOR buttons (•, ª, 0, 1)

Press this change what appears on the display.

SELECT button

Press this to switch the display.

Also use this button to complete the setting.

•System setup items and default values (set upon shipment from the factory)

	System setup				Default settings
Speaker	Input the combination of speakers in your system and their		Front Sp.		Center Sp.	Surround Sp.	Sub Woofer
	corresponding sizes (SMALL for regular speakers, LARGE for full-size,
Configuration	full-range) to automatically set the composition of the signals output		Large		Small	Small	Yes
	from the speakers and the frequency response.
Subwoofer Mode	This selects the subwoofer speaker for playing deep bass				Subwoofer mode = Normal
	signals.
	This parameter is for optimizing the timing with which the audio		Front & Subwoofer		Center	Surround L & R	—
Delay Time	signals are produced from the speakers and subwoofer according to
	the listening position.		12 ft (3.6 m)		12 ft (3.6 m)	10 ft (3.0 m)	—
		Digital	COAXIAL	OPTICAL
	This assigns the digital input jacks for the different input	Inputs
Digital Input
	sources.	Input	DVD/VDP	TV/DBS
		source

NOTE:

• The system setup is not displayed when “HEADPHONE ONLY” is selected.

16