Denon AVR-1403, 483 manual Listening to the Radio, Auto preset memory

Page 39

ENGLISH

15 LISTENING TO THE RADIO

Auto preset memory

This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory.

1

1

When the main unit’s power operation switch turn on while

pressing the set’s MEMORY button the unit automatically

begins searching for FM broadcast stations.

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

When the first FM broadcast station is found, that station is

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

stored in the preset memory at channel A1. Subsequent

stations are automatically stored in order at preset channels A2 to A8, B1 to B8, C1 to C8, D1 to D8 and E1 to E8, for a maximum of 40 stations.

3

Channel A1 is tuned in after the auto preset memory

operation is completed.

 

NOTES:

If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation.

To interrupt this function, press the power operation button.

2DEFAULT VALUE

AUTO TUNER PRESETS A1 ~ A8 B1 ~ B8 C1 ~ C8 D1 ~ D8 E1 ~ E8

87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz

520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz

90.1MHz

90.1MHz

90.1MHz

39

Image 39
Contents Nous vous remercions pour l’achat de cet appareil AVR-1403/483English Francais Safety Instructions Before Using Table of ContentsFeatures Front Panel Part Names and FunctionsSystem System SET UP Remote control unitSetting UP the Speaker Systems Finally, setting up the systemRead this First It for hair driers, etc Connecting the audio componentsConnections Use the AC Outlet for audio equipment only. Do not useAudio OUT Video OUT Connecting the video equipmentsConnecting a Video game equipment AM loop antenna assembly Connecting the antenna terminalsConnecting the speaker cords Speaker system connectionsSpeaker Impedance Protector circuit Using the Remote Control Unit Range of operation of the remote control unitInserting the batteries Use the following buttons to set up the system Setting UP the SystemSURR. Small System SET UPFront Large Center SmallSW Mode Norm Setting the Subwoofer ModeWoofer YES Setting the speaker distance PreparationsListening position Terminal Initial Digital input setupAfter setting up the system Coax DVDRemote Control Unit Preset memory Audio componentOperating Denon audio components Preset memory Video component For video deck VCR Operating a video component stored in the preset memoryFor DVD player For video disc player VDPBefore operating Check that all connections are proper Turn on the powerButton on the remote control unit to turn on the power OperationPlaying the input source To select the input mode from main unitTo select the input mode from the remote control unit Input mode selection functionDTS Adjusting the sound quality toneAfter starting playback Dolby DigitalListening over headphones Turning the sound off temporarily mutingChecking the currently playing program source, etc Playback using the external input EXT. in jacks Mode AUTO, PCM, DTS or Analog button to switch toFollow to 3 under Playing the input source Adjust the level of the selected speaker SurroundBefore playing with the surround function Dolby PRO Logic Dolby Surround Pro Logic II modeSurround parameters q Pro Logic II Mode Dimension settingCenter Width setting Default settingDolby PLII, Dolby PROLOGIC, Dolby DIGITAL, DTS Cinema EQ OFFCOMP. Dynamic Range Compression DefaultCOMP. OFF Surround parameters w Cinema EQ. Cinema EqualizerPersonal Memory Plus Surround modes and their featuresDSP Surround Simulation Video GameUse Left Right buttons to set the room size Initial Room Size MEDEffect Level DSP surround simulationUse Left Right buttons to set the delay time Initial Default Y/NWhen press the UP button When press the Down buttonPress the Surround Parameter button Surround modes and parameters Surround parameters eListening to the Radio Auto preset memoryAuto tuning Manual tuningSet the input function to Tuner Recalling preset stations Preset stationsInitialization of the Microprocessor Last Function MemorySpeaker setting examples Additional InformationSurround Dolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDolby Pro Logic DTS compatible media and playback methods DTS Digital SurroundTroubleshooting Stereo SpecificationsAudio section MonoList of Preset Codes / Liste DE Codes Préréglés DVD VDPVCR Francais English 16-11, Yushima 3-CHOME, BUNKYOU-KU, Tokyo 113-0034, Japan Page Page Page