840114001 ENv04.qxd 3/13/08 12:33 PM Page 8
Troubleshooting (continued)
| PROBLEM | Things TO CHECK |
|
|
|
| Fryer gives off a | • Grease filter is saturated. Remove lid and clean lid |
| strong, unpleasant | and grease filter in hot, soapy water. |
| odor. | • Oil isn’t fresh. Change oil. Filter oil regularly to keep it |
|
| |
|
| fresh longer. |
|
| • Type of oil is not suitable for |
|
| Use good quality frying oil. Do not mix two different |
|
| types of oil. |
|
|
|
| Unit does not | • Ensure magnetic cord assembly is properly attached |
| heat. | to fryer socket. |
|
| • Ensure electrical cord assembly is plugged into |
|
| electrical outlet. |
|
| • Ensure timer is set to Stay On or a set amount of time |
|
|
|
| During frying, the | • There is too much oil in fryer. Make sure that oil does |
| oil spills over the | not exceed maximum level mark. |
| edge of the | • Food contains too much liquid. Dry food thoroughly |
| fryer. | |
| before placing it in fryer. Follow instructions in “Frying” | |
|
| |
|
| section. |
|
| • There is too much food in frying basket. Do not fry |
|
| more food at one time than quantities indicated on |
|
| food package or Frying Chart. |
|
|
|
| The oil foams too | • Food contains too much liquid. Dry food thoroughly |
| much during | before placing it in fryer. |
| frying. | • Type of oil is not suitable for |
|
| |
|
| Use good quality frying oil. Do not mix two different |
|
| types of oil or fat. |
|
| • Oil pot has not been cleaned properly. See instructions |
|
| in “Cleaning” section. |
|
|
|
| Condensation | • Water vapor from food collects on window. When unit |
| forms on viewing | is cold, wipe a small amount of oil on inside of viewing |
| window. | window to prevent condensation buildup. |
|
|
|
Visit hamiltonbeach.com
for delicious recipes
and to register your product online!
8