Wells OC-2HG operation manual Unpacking & Inspection, Service Technician Installation Notes

Page 7

272 304621 Operation Manual for OC-2HG Convection Oven/Combo Cook Center

UNPACKING & INSPECTION

Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials and accessories from the Appliance before connecting electrical power or otherwise performing any installation procedure.

Carefully read all instructions in this manual and the Installation Instruction Sheet packed with the appliance before starting any installation.

Read and understand all labels and diagrams attached to the appliance.

Carefully account for all components and accessories before discarding packing materials. Store all accessories in a convenient place for later use.

COMPONENTS

5 ea.

OVEN RACKS

2 ea.

RACK SUPPORTS

1 ea.

FAN BAFFLE

4 ea.

ADJUSTABLE LEGS

ACCESSORIES

1 ea. LITERATURE PACKAGE

SERVICE TECHNICIAN INSTALLATION NOTES

1.Installation and start up should be performed by an authorized installation company. Installer must record installation particulars on the CUSTOMER SERVICE DATA form on page 23 of this manual.

2.Verify that this equipment installation is in compliance with the specifications listed in this manual and with local code requirements.

5

INSTALLATION

NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation.

Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.

WARNING:

RISK OF PERSONAL INJURY

Installation procedures must be performed by a qualified technician with full knowledge of all applicable electrical and plumbing codes. Failure can result in personal injury and property damage.

IMPORTANT:

It is the RESPONSIBILITY OF THE INSTALLER to check with the AUTHORITY HAVING JURISDICTION, in order to verify compliance with local codes and ordinances for THIS SPECIFIC EQUIPMENT INSTALLATION.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Important do not Discard this Manual Model OC-2HGLimited Warranty Statement Specifications Table of ContentsIntroduction Features & Operating Controls Description Function HOT Surface Precautions and General InformationAgency Listing Information Electric Shock HazardRisk of Personal Injury InstallationService Technician Installation Notes Unpacking & InspectionInstalling Optional Casters Installing LegsEquipment SET-UP Risk Damage Electrical Connections Must be Made by aElectrical Shock Hazard Minutes Racks OperationSuggested Cooking Times Convection Oven Product Temp Time NumberOperation Convection Oven Operating Instructions Manual Cook ModeProgram Cook Mode Temperature Offset ModeOperation Hotplate Operating Instructions Operation Griddle Operating InstructionsTools Oven Cleaning InstructionsDaily Cleaning FrequencyWeekly Cleaning Griddle Exterior Griddle Cleaning InstructionsImportant Never USE Steel Wool to Clean the Griddle Surface During USEHotplate Cleaning Instructions Precautions Preventative MaintenanceFAN Troubleshooting SuggestionsSymptom Possible Cause Suggested Remedy Error CodesExploded View and Parts List Exploded View and Parts List Exploded View and Parts List Grommet 7/8 O.D Exploded View and Parts List ASSY, Cavity Terminal BLOCK, 3 Pole Wiring Diagram Prep TOP Venting KIT Used When Cooking ProteinDescription Oven Stacking KIT

OC-2HG specifications

The Wells OC-2HG is a sophisticated piece of equipment designed to meet the demands of modern commercial and industrial applications. This innovative unit integrates advanced technologies to enhance efficiency, productivity, and sustainability. One of the standout features of the OC-2HG is its compact design, which allows for easy installation in various settings without requiring extensive modifications to existing infrastructure.

At the core of the OC-2HG is a high-performance engine that boasts low emissions and reduced noise levels, making it suitable for use in urban environments. This is complemented by an intelligent power management system that optimizes fuel consumption and ensures that the device operates at peak efficiency, ultimately lowering operational costs. Additionally, the unit is equipped with a cutting-edge digital control panel that provides real-time monitoring and diagnostics, allowing operators to track performance metrics and quickly address any potential issues.

The OC-2HG also features an advanced cooling system that enhances reliability and extends the lifespan of critical components. This technology allows the unit to operate effectively in a variety of temperature conditions, ensuring consistent performance regardless of environmental factors. Furthermore, the equipment is built with durable materials that withstand the rigors of daily use while minimizing maintenance needs.

Safety is a top priority in the design of the Wells OC-2HG. The unit is equipped with multiple safety features, including automated shut-off mechanisms and emergency stop functions, which help protect both operators and surrounding personnel.

Another notable characteristic of the OC-2HG is its versatility. It can be adapted for a wide range of applications, from construction sites to energy production facilities. This adaptability is supported by a selection of interchangeable accessories and configurations, allowing users to configure the equipment to suit their specific needs.

In conclusion, the Wells OC-2HG combines cutting-edge technology with an emphasis on safety and efficiency. With its compact design, advanced engine, intelligent monitoring systems, and versatility, it stands out as a premier choice in the market for those looking to enhance their operational capabilities while reducing their environmental impact. Whether for industrial or commercial use, the OC-2HG is undeniably equipped to deliver superior performance and reliability.
Top Page Image Contents