Wells OC-2HG Electrical Connections Must be Made by a, Risk Damage, Electrical Shock Hazard

Page 9

INSTALLATION (continued)

DANGER: ELECTRICAL SHOCK HAZARD

ELECTRICAL CONNECTIONS MUST BE MADE BY A

LICENSED ELECTRICIAN Electrical shock will cause death or serious injury.

272 304621 Operation Manual for OC-2HG Convection Oven/Combo Cook Center

Refer to the nameplate on the front of the appliance.

•Verify the ELECTRICAL SERVICE POWER.

•Voltage and phase must match the nameplate specifications, and available electrical service amperage must meet or exceed the specifications listed on page 1.

•Wiring must be no less than 4 AWG solid copper wire, rated for at least 90ºC.

NOTE: Wire gauge, insulation type and temperature rating , as well as type, size and construction of conduit, must meet or exceed applicable specifications of local codes and of the National Electrical Code.

1.Electrical connection terminal block and ground lug are accessible by removing the right side panel.

2.This appliance must be connected to a suitable building ground.

The equipment ground connection is marked "

".

3.The appliance is shipped from the factory wired for 3-phase electrical service. Refer to the Wiring Diagram included with this appliance, and verify that field wiring conforms to this diagram.

IMPORTANT: This appliance is not approved for 1Ø operation. Conversion of this appliance to single-phase operation will void the warranty.

4.Reinstall right side panel at completion of electrical hook-up.

CAUTION:

RISK OF

DAMAGE

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.

CAUTION:

ELECTRICAL SHOCK HAZARD

The ground lug of this appliance must be connected to a suitable building ground.

IMPORTANT:

Contact a licensed electrician to install and connect electrical power to the appliance.

IMPORTANT: Damage due to being connected to the wrong voltage or phase is NOT covered by warranty.

IMPORTANT:

The appliance is shipped from the factory wired for 3-phase (3ø) electrical service. This appliance is not approved for 1ø operation. Conversion of this appliance to single-phase operation will invalidate the UL listing and void the warranty

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Important do not Discard this Manual Model OC-2HGLimited Warranty Statement Table of Contents SpecificationsIntroduction Features & Operating Controls Description Function Agency Listing Information Precautions and General InformationElectric Shock Hazard HOT SurfaceService Technician Installation Notes InstallationUnpacking & Inspection Risk of Personal InjuryInstalling Legs Installing Optional CastersEquipment SET-UP Electrical Connections Must be Made by a Risk DamageElectrical Shock Hazard Suggested Cooking Times OperationConvection Oven Product Temp Time Number Minutes RacksOperation Program Cook Mode Manual Cook ModeTemperature Offset Mode Convection Oven Operating InstructionsOperation Hotplate Operating Instructions Operation Griddle Operating InstructionsDaily Cleaning Oven Cleaning InstructionsFrequency ToolsWeekly Cleaning Important Never USE Steel Wool to Clean the Griddle Surface Griddle Cleaning InstructionsDuring USE Griddle ExteriorHotplate Cleaning Instructions Precautions Preventative MaintenanceSymptom Possible Cause Suggested Remedy Troubleshooting SuggestionsError Codes FANExploded View and Parts List Exploded View and Parts List Exploded View and Parts List Grommet 7/8 O.D Exploded View and Parts List ASSY, Cavity Terminal BLOCK, 3 Pole Wiring Diagram Description Venting KIT Used When Cooking ProteinOven Stacking KIT Prep TOP

OC-2HG specifications

The Wells OC-2HG is a sophisticated piece of equipment designed to meet the demands of modern commercial and industrial applications. This innovative unit integrates advanced technologies to enhance efficiency, productivity, and sustainability. One of the standout features of the OC-2HG is its compact design, which allows for easy installation in various settings without requiring extensive modifications to existing infrastructure.

At the core of the OC-2HG is a high-performance engine that boasts low emissions and reduced noise levels, making it suitable for use in urban environments. This is complemented by an intelligent power management system that optimizes fuel consumption and ensures that the device operates at peak efficiency, ultimately lowering operational costs. Additionally, the unit is equipped with a cutting-edge digital control panel that provides real-time monitoring and diagnostics, allowing operators to track performance metrics and quickly address any potential issues.

The OC-2HG also features an advanced cooling system that enhances reliability and extends the lifespan of critical components. This technology allows the unit to operate effectively in a variety of temperature conditions, ensuring consistent performance regardless of environmental factors. Furthermore, the equipment is built with durable materials that withstand the rigors of daily use while minimizing maintenance needs.

Safety is a top priority in the design of the Wells OC-2HG. The unit is equipped with multiple safety features, including automated shut-off mechanisms and emergency stop functions, which help protect both operators and surrounding personnel.

Another notable characteristic of the OC-2HG is its versatility. It can be adapted for a wide range of applications, from construction sites to energy production facilities. This adaptability is supported by a selection of interchangeable accessories and configurations, allowing users to configure the equipment to suit their specific needs.

In conclusion, the Wells OC-2HG combines cutting-edge technology with an emphasis on safety and efficiency. With its compact design, advanced engine, intelligent monitoring systems, and versatility, it stands out as a premier choice in the market for those looking to enhance their operational capabilities while reducing their environmental impact. Whether for industrial or commercial use, the OC-2HG is undeniably equipped to deliver superior performance and reliability.
Top Page Image Contents