Wells OC-2HG operation manual Operation

Page 11

272 304621 Operation Manual for OC-2HG Convection Oven/Combo Cook Center

GRIDDLE SECTION

G.01 GRIDDLE TEMPERATURE CONTROL:

Thermostat, controls 0ºF(OFF) to 400ºF

G.02 GRIDDLE HEAT ON INDICATOR

HOTPLATE SECTION

H.01 FRONT HOTPLATE TEMPERATURE

CONTROL: Infinite Switch, OFF to HIGH

H.02 FRONT HOTPLATE HEAT ON INDICATOR

H.03 REAR HOTPLATE TEMPERATURE

CONTROL: Infinite Switch, OFF to HIGH

H.04 REAR HOTPLATE HEAT ON INDICATOR

CONVECTION OVEN SECTION

V.01 OVEN POWER SWITCH, 3 position

ON (oven + fan) - OFF - FAN (only)

V.02 FAN SPEED SWITCH, 2 position

HI - LOW

V.03 OVEN POWER ON INDICATOR

V.04 OVEN HEAT ON INDICATOR

V.05 DIGITAL READOUT: Displays oven

temperature, cook time and oven programming information

A.TEMPERATURE DISPLAY(ºF)

B.TIME DISPLAY (minutes:seconds)

C.ERROR CODES (see page 17)

V.06 OVEN TIME CONTROL

V.07 OVEN TEMPERATURE CONTROL

V.08 TIMER / PROGRAM START BUTTON

V.09 ACTUAL TEMP BUTTON: Press to view current oven Farenheit temperature on readout

V.10 PROGRAM SELECTION BUTTONS:

Press and hold while turning controls to program time and temp Press and release to begin program

V.11 CANCEL BUTTON: Press to: cancel a selected program in progress; or, to silence the audible alarm at the end of

a cook cycle

9

OPERATION (continued)

CAUTION:

HOT SURFACE

Cooking surfaces are very hot and will cause burns on contact with unprotected skin.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Important do not Discard this Manual Model OC-2HGLimited Warranty Statement Introduction Table of ContentsSpecifications Features & Operating Controls Description Function HOT Surface Precautions and General InformationAgency Listing Information Electric Shock HazardRisk of Personal Injury InstallationService Technician Installation Notes Unpacking & InspectionEquipment SET-UP Installing LegsInstalling Optional Casters Electrical Shock Hazard Electrical Connections Must be Made by aRisk Damage Minutes Racks OperationSuggested Cooking Times Convection Oven Product Temp Time NumberOperation Convection Oven Operating Instructions Manual Cook ModeProgram Cook Mode Temperature Offset ModeOperation Hotplate Operating Instructions Operation Griddle Operating InstructionsTools Oven Cleaning InstructionsDaily Cleaning FrequencyWeekly Cleaning Griddle Exterior Griddle Cleaning InstructionsImportant Never USE Steel Wool to Clean the Griddle Surface During USEHotplate Cleaning Instructions Precautions Preventative MaintenanceFAN Troubleshooting SuggestionsSymptom Possible Cause Suggested Remedy Error CodesExploded View and Parts List Exploded View and Parts List Exploded View and Parts List Grommet 7/8 O.D Exploded View and Parts List ASSY, Cavity Terminal BLOCK, 3 Pole Wiring Diagram Prep TOP Venting KIT Used When Cooking ProteinDescription Oven Stacking KIT

OC-2HG specifications

The Wells OC-2HG is a sophisticated piece of equipment designed to meet the demands of modern commercial and industrial applications. This innovative unit integrates advanced technologies to enhance efficiency, productivity, and sustainability. One of the standout features of the OC-2HG is its compact design, which allows for easy installation in various settings without requiring extensive modifications to existing infrastructure.

At the core of the OC-2HG is a high-performance engine that boasts low emissions and reduced noise levels, making it suitable for use in urban environments. This is complemented by an intelligent power management system that optimizes fuel consumption and ensures that the device operates at peak efficiency, ultimately lowering operational costs. Additionally, the unit is equipped with a cutting-edge digital control panel that provides real-time monitoring and diagnostics, allowing operators to track performance metrics and quickly address any potential issues.

The OC-2HG also features an advanced cooling system that enhances reliability and extends the lifespan of critical components. This technology allows the unit to operate effectively in a variety of temperature conditions, ensuring consistent performance regardless of environmental factors. Furthermore, the equipment is built with durable materials that withstand the rigors of daily use while minimizing maintenance needs.

Safety is a top priority in the design of the Wells OC-2HG. The unit is equipped with multiple safety features, including automated shut-off mechanisms and emergency stop functions, which help protect both operators and surrounding personnel.

Another notable characteristic of the OC-2HG is its versatility. It can be adapted for a wide range of applications, from construction sites to energy production facilities. This adaptability is supported by a selection of interchangeable accessories and configurations, allowing users to configure the equipment to suit their specific needs.

In conclusion, the Wells OC-2HG combines cutting-edge technology with an emphasis on safety and efficiency. With its compact design, advanced engine, intelligent monitoring systems, and versatility, it stands out as a premier choice in the market for those looking to enhance their operational capabilities while reducing their environmental impact. Whether for industrial or commercial use, the OC-2HG is undeniably equipped to deliver superior performance and reliability.
Top Page Image Contents