Filters Installation, Filter Installation

INSTALLATION (continued)

FILTERS INSTALLATION

1.FILTER PACK: Ships installed in the hood. If the FILTER PACK is not in position, the CHECK FILTERS indicator will light.

If the FILTER PACK becomes clogged, the REPLACE FILTER PACK indicator will glow.

To install the FILTER PACK: Position the filter pack with the charcoal portion UP. Slide the filter pack toward the rear of the unit until it contacts the guides on the back panel. Push the filter pack UP into the upper opening until it rests firmly against the filter pack seal. When up in position, holder clips can be snapped over wall ledge on each side. To remove FILTER PACK: Grasp both holder clips and pull INWARD until the clips clear the sidewall ledge. Then, pull the filter pack down and out.

2.PRE-FILTER: The PRE-FILTER ships in the FILTER FRAME. If the PRE-FILTER is not in position, or if the PRE-FILTER is not in the FILTER FRAME, the CHECK FILTERS indicator will light. If the PRE-FILTER becomes clogged, the REPLACE PRE-FILTERindicator will glow.

To install the PRE-FILTER: Pay attention to the air flow markings. The AIR FLOW arrow will point away from the installer. Slide the assembly up into the front opening, behind the upper filter rail.

While pressing slightly against the bottom of the assembly, pull the FILTER HANDLE toward you so as to engage the FILTER HOOK over the lip of the top filter rail. Then lower and seat the assembly into the top indentation of the lower filter rail.

3.GREASE BAFFLE: If the GREASE BAFFLE is not in place, the CHECK FILTERS indicator will glow.

To install the GREASE BAFFLE: Slide the grease baffle up into the indentation of the upper filter rail, then lower and seat it into the bottom indentation of the lower filter rail. Pull toward you and downward to verify the GREASE BAFFLE is properly seated in the lower frame rail.

NOTE:

The GREASE BAFFLE and FILTER PACK activate mechanical switches, and the PRE-FILTER activates a vacuum switch, to verify that the filter elements are in their proper positions.

All filter elements must be properly installed or the griddle will not be energized. Also, the CHECK FILTERS indicator will light.

IMPORTANT:

The filter hook prevents the PRE-FILTER from being drawn in during operation. After installation, press against the top of the filter frame to verify proper engagement of the filter hook over the lip of the top filter rail.

SEAL

FILTER PACK

HOLDER CLIP CLIPS ONTO LEDGE

	OFUNIT	FILTER PACK
	WALL	POSITION
	WALL	SWITCH
		FILTER PACK
		SEAL
	FLOW	FILTER PACK
	FLOW	HOLDER CLIP
		HOLDER CLIP
	AIR	GREASE BAFFLE
	AIR	POSITION
		SWITCH
		PRE-FILTER
		ASSEMBLY
		GREASE
		BAFFLE
		GREASE
		TROUGH
		GREASE
		CUP

PRE-FILTER

NOTE: AIR FLOW ARROW

POINTS AWAY FROM INSTALLER WHEN PROPERLY INSTALLED

FILTER HOOK

		R
	E
T			FILTER
IL			FILTER
-F			HOOK
E			HOOK
R
P

FILTER

RAIL

FILTER HANDLE

FILTER FRAME

NOTE: PRE-FILTER IS SENSED

AS BEING IN POSITION BY THE

PRESSURE DROP ACROSS IT.

Fig. 6 Filter Installation

WVG-136RW, WVG-136, WVG-136RW specifications

The Wells WVG-136, WVG-136RW, and WVG-136R are advanced cooking appliances designed to meet the demands of various commercial kitchen settings. These units combine modern technology with user-friendly features, ensuring efficient food preparation.

The WVG-136 series is known for its robust construction and reliability. Built from high-grade stainless steel, these units are designed to withstand heavy use in fast-paced environments. The units are not only sturdy but also easy to clean, making them ideal for busy kitchens.

One of the standout features of the WVG-136 series is its versatility. Each model is equipped with multiple cooking options, including steam, convection, and even grill settings, allowing chefs to prepare a wide range of dishes. This flexibility enables kitchens to streamline their operations, as they can use one appliance for various cooking methods.

The digital control panel is another significant aspect of the WVG-136 series. The user-friendly interface allows for easy programming and monitoring of cooking parameters, ensuring precision and consistency in food preparation. With customizable settings, chefs can easily adjust cooking times and temperatures to suit different recipes.

Moreover, the WVG-136RW features a built-in water reservoir, providing enhanced steaming capabilities. This model is particularly advantageous for restaurants that require tender, moist cooking for vegetables, seafood, and rice dishes. The precise steam control helps maintain the nutritional value and flavor of food.

Energy efficiency is another crucial characteristic of the WVG-136 series. These models are designed to consume less energy without compromising on performance. This aspect not only helps in reducing operational costs but also aligns with modern sustainability practices that many businesses are striving to achieve.

The WVG-136R model further enhances functionality with its rapid heat-up time. This feature allows kitchens to minimize wait times and enhance service speed, a critical factor in high-demand settings.

Overall, the Wells WVG-136, WVG-136RW, and WVG-136R are exemplary models that embody innovation and efficiency. Their main features, including versatile cooking options, digital control panels, energy efficiency, and robust construction, make them valuable assets for any commercial kitchen looking to elevate its cooking capabilities. Whether it's a restaurant, catering service, or institutional kitchen, these units stand out as reliable partners in culinary excellence.