Wells WM-TR operation manual START-UP Troubleshooting

Page 12

INSTALLATION (continued)

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

START-UP TROUBLESHOOTING

Power indicator not lit.

a.Verify electrical power is properly hooked-up to Water-Max™ and circuit breaker is turned ON

b.Verify power switch is turned ON

c.Verify that water tank is properly in place and mated with the receptacle

d.Verify water supply is properly installed, is turned on, and is providing at least 25 p.s.i.

Error indicator flashing. Tank is not filling.

a.Possible cause; sufficient inlet water pressure is not sensed during tank filling:

Be sure water supply is adequate during all phases of operation. Other equipment on the water line may be reducing overall water volume and/or pressure to Water-Max™. Also, be sure any supply line filters are clean.

b.Possible cause; sufficient temperature rise is not sensed between inlet and output water while tank is filling:

Be sure electrical supply voltage remains at rated value during all phases of operation. Otherwise, refer to Water-Max™ Service Manual p/n 503364.

Water-Max™ will not flow water from the dispense nozzle.

a.Verify that power indicator is lit, and status indicator is not flashing. Check that tank is properly positioned and that the tank indicator is lit.

b.Verify that the water tank is in place holding the tank position momentary switch ON;.

c.Verify that the water level is below the water level sensor. If water level is low, verify that the water level sensor and surrounding area are clean and free from lime and scale.

The water tank heater will not heat:

a.Verify the water tank connector is fully mated with the receptacle. The tank indicator will glow when the tank is properly installed.

b.Verify power switch is ON.

c.Check resistance at connector on tank: L1 to L2 = 144(5 gal).

Status Indicator Flashing:

Water-Max™ control board has encountered an error condition. Read error code through view port. Refer to Water-Max™ Service Manual p/n 503364 for error code remedial action.

10

Image 12
Contents 705 Important do not Discard this ManualLimited Warranty Statement Table of Contents SpecificationsIntroduction Features & Operating Controls Access by qualified technician onlyFeatures & Operating Controls Precautions and General Information Agency Listing InformationInstallation SetupUnpacking & Inspection Installation Plumbing Line ConnectionElectrical Installation Shock HazardInstallation START-UP and Checkout Hot SurfaceInstallation START-UP Troubleshooting Operation Set-Up and UsageTo Keep Water in Tank Hot Cleaning Instructions Daily CleaningDeliming Instructions Burn HazardChemical Burn Hazard Deliming Instructions Scrub Tank Troubleshooting Suggestions Insufficient water supplyParts & Service Description Service

WM-TR specifications

The Wells WM-TR is a commercial-grade, walk-in cooler and freezer unit designed to meet the needs of various businesses, from restaurants to grocery stores. Its robust construction and efficient design make it an essential component for maintaining perishable goods at optimal temperatures.

One of the standout features of the Wells WM-TR is its energy-efficient refrigeration system. Utilizing advanced technology, the unit operates with minimal energy consumption while ensuring that the internal temperature remains consistently cool. This not only helps businesses save on energy costs but also contributes to a more sustainable operation in a world increasingly focused on environmental responsibilities.

The unit boasts an all-stainless steel interior and exterior, providing exceptional durability and easy maintenance. This material is not only resistant to rust and corrosion but also easy to clean, making it ideal for food service environments where hygiene is a top priority. The unit is designed with rounded corners and smooth surfaces to minimize dirt buildup and facilitate regular cleaning routines.

Another critical characteristic of the Wells WM-TR is its adjustable shelving. The unit comes equipped with heavy-duty shelves that can be easily repositioned to accommodate different sizes of products, from small items like herbs and sauces to bulk supplies of meats and dairy products. This flexibility allows businesses to maximize their storage space efficiently.

The Wells WM-TR is also designed with user convenience in mind. It features a user-friendly digital thermostat for precise temperature control, allowing operators to set and monitor the internal conditions with ease. Additionally, LED interior lighting provides excellent visibility, ensuring that employees can quickly locate what they need, even in dimly lit environments.

Safety features, such as automatic door closure and a built-in alarm for temperature fluctuations, further enhance the unit's reliability. These features ensure that the integrity of stored products is maintained, reducing the risk of spoilage and associated losses.

Overall, the Wells WM-TR stands out as a top-tier solution for businesses looking for a dependable, efficient, and versatile refrigeration system. With its combination of advanced technologies, durable construction, and user-friendly features, it is an investment that supports operational efficiency while safeguarding the quality of perishable goods.