Harman Stove Company Harman Stove The Harman Magnum Stoker manual Stoker ControlTrouble-Shooting

18

Theinstallation shouldbeperformed byyour dealerwhoisfactory trained to correct any problem on initialstart-up. Afterproperinstallation, manyyearsof trouble-free operationcan beexpected.

Stoker ControlTrouble-Shooting

Thistrouble-shootingguide is designedtohelp thecustomer findbasic problemsexternalto the stoker timer. If a problem cannot be located by usingthis guide,servicingofthestoker controlor replacement maybe required. Thisshould bedone byqualified personnel.

PROBLEM:No motors orlights willturnon.

Check the AC power cord to the stoker control.

Checkthe 3 amp fuse on the side panelof the stoker timer. (Replace only with a 3amp slow blow fuse.)

PROBLEM:Lights on thestoker controlareon, but motors willnot operate.

Checkthe AC powerplugs from the motors(are they securely plugged into the correct outlet.)

PROBLEM:One of the motors willnotoperate.

Checkif the light above the receptacle is lit. Checkthe AC power plugfrom themotor (is itsecurely plugged into the correctoutlet.)

PROBLEM:The motorsare cyclingon and off, but not in thecorrect order.

Checkthe AC powerplugs from the motors(are they securely plugged into the correct outlet.)

PROBLEM:Coalfeeder motorwillnot turnon.

Checkif the red light is lit, if not, checkif the feed motor switch is turnedon.

PROBLEM:The motors turn onand off as programmed, but the room temperature is below the thermostatsetting.

DO NOT BURN WET COAL