Wells WM-TR operation manual Troubleshooting Suggestions, Insufficient water supply

Page 18

TROUBLESHOOTING SUGGESTIONS

SYMPTOM

 

POSSIBLE CAUSE

SUGGESTED REMEDY

 

 

 

 

POWER INDICATOR not lit

 

Water-Max™ not connected to power

Check circuit breaker

 

 

POWER switch OFF

Press POWER switch to ON

 

 

Insufficient water supply

Check water supply turned ON

 

 

 

And supplying at least 25 p.s.i.

 

 

Water tank not installed

Check tank for proper installation

TANK INDICATOR not lit

 

Tank not properly seated in receptacle

Check tank for proper installation

 

 

 

 

STATUS INDICATOR

 

ERROR detected - water pressure

Check water supply turned ON

flashing

 

insufficient

And supplying at least 25 p.s.i.

 

 

ERROR detected - temperature rise

Be sure voltage is maintained

 

 

between inlet and outlet insufficient

during all phases of operation

 

 

 

 

 

 

RESET Water-Max™: Turn POWER SWITCH OFF. Wait 20 seconds.

 

 

Turn POWER SWITCH ON. If unit resets and status indicator comes on

 

 

without flashing, error was (probably) a low water condition. Otherwise,

 

 

contact your Authorized Wells Service Agency.

 

 

 

 

No water flow from

 

Tank is full

Normal operation

dispense nozzle (power

 

 

 

 

Tank is sensed as full, but is actually

Clean water level probe

indicator lit, status indicator

 

 

low

 

not flashing)

 

 

 

 

 

 

 

Tank not properly installed

Check tank for proper installation

 

 

 

 

INDUCTIVE HEATER

 

Internal hi-limit tripping (cooling fan

Be sure all cooling openings

operates intermittently

 

dirty or obstructed)

and louvers are unobstructed.

 

 

 

Otherwise contact Authorized

 

 

 

Wells Service Agency

 

 

 

 

WATER TANK will not heat

 

Tank not properly installed (TANK

Check tank for proper installation

 

 

INDICATOR not lit)

 

 

 

Internal damage

Contact Authorized Wells

 

 

 

Service Agency

 

 

 

 

OPERATIONAL NOTES

 

 

 

Water-Max™ will not operate if water pressure is less than 25 p.s.i. If Water-Max™ shuts down (status light flashes) for no apparent reason, other equipment on the water line may be robbing water pressure and/or volume from Water-Max™.

ERROR CODES are displayed on the control board readout, visible through the view port on the upper right side of the dispenser. Refer to Water-Max™ Service Manual p/n 503364 for error code meanings and suggested remedies.

There are no user serviceable components in the appliance. In all cases of damage or component malfunction, contact your Authorized Wells Service Agency for repairs.

16

Image 18
Contents 705 Important do not Discard this ManualLimited Warranty Statement Table of Contents SpecificationsIntroduction Features & Operating Controls Access by qualified technician onlyFeatures & Operating Controls Precautions and General Information Agency Listing InformationInstallation SetupUnpacking & Inspection Installation Plumbing Line ConnectionElectrical Installation Shock HazardInstallation START-UP and Checkout Hot SurfaceInstallation START-UP Troubleshooting Operation Set-Up and UsageTo Keep Water in Tank Hot Cleaning Instructions Daily CleaningDeliming Instructions Burn HazardChemical Burn Hazard Deliming Instructions Scrub Tank Troubleshooting Suggestions Insufficient water supplyParts & Service Description Service

WM-TR specifications

The Wells WM-TR is a commercial-grade, walk-in cooler and freezer unit designed to meet the needs of various businesses, from restaurants to grocery stores. Its robust construction and efficient design make it an essential component for maintaining perishable goods at optimal temperatures.

One of the standout features of the Wells WM-TR is its energy-efficient refrigeration system. Utilizing advanced technology, the unit operates with minimal energy consumption while ensuring that the internal temperature remains consistently cool. This not only helps businesses save on energy costs but also contributes to a more sustainable operation in a world increasingly focused on environmental responsibilities.

The unit boasts an all-stainless steel interior and exterior, providing exceptional durability and easy maintenance. This material is not only resistant to rust and corrosion but also easy to clean, making it ideal for food service environments where hygiene is a top priority. The unit is designed with rounded corners and smooth surfaces to minimize dirt buildup and facilitate regular cleaning routines.

Another critical characteristic of the Wells WM-TR is its adjustable shelving. The unit comes equipped with heavy-duty shelves that can be easily repositioned to accommodate different sizes of products, from small items like herbs and sauces to bulk supplies of meats and dairy products. This flexibility allows businesses to maximize their storage space efficiently.

The Wells WM-TR is also designed with user convenience in mind. It features a user-friendly digital thermostat for precise temperature control, allowing operators to set and monitor the internal conditions with ease. Additionally, LED interior lighting provides excellent visibility, ensuring that employees can quickly locate what they need, even in dimly lit environments.

Safety features, such as automatic door closure and a built-in alarm for temperature fluctuations, further enhance the unit's reliability. These features ensure that the integrity of stored products is maintained, reducing the risk of spoilage and associated losses.

Overall, the Wells WM-TR stands out as a top-tier solution for businesses looking for a dependable, efficient, and versatile refrigeration system. With its combination of advanced technologies, durable construction, and user-friendly features, it is an investment that supports operational efficiency while safeguarding the quality of perishable goods.