Electrical Installation, Shock Hazard

INSTALLATION (continued)

ELECTRICAL INSTALLATION

NOTICE:

A DEDICATED CIRCUIT OF AT LEAST 50 AMPS IS REQUIRED. WIRING MUST BE AT LEAST 6 ga., SUITABLE FOR 75º C.

CONDUIT, WIRING AND CONNECTIONS MUST BE INSTALLED

AND MAINTAINED IN COMPLIANCE WITH

FEDERAL, STATE, AND LOCAL ORDINANCES.

Conduit, wiring and connections must comply with the specifications in this manual, and with local ordinances. A 208V or 240V single phase, 50 amp circuit required.

Field supply wiring must pass thru, and be secured by, the strain relief on the bottom left side of the dispenser.

Field wiring supply power must connect to the rear-most side of the terminal block, terminals L1 and L2 as shown.

NOTE: Terminal block is accessible by removing the tank shelf. Remove the two screws under the shelf and lift the shelf off of the unit. See wiring tag.

Fig. 4 Terminal Block Wiring

The dispenser is shipped from the factory configured for either 208 volt or 240 volt use. It may be converted from 208 volt to 240 volt, or from 240 volt to 208 volt, use by moving Wire #11 to either the terminal labeled “208V”, or to the terminal labeled “240V”, as appropriate for the input voltage.

Optional cord set uses a 4’ cord and NEMA 6-50P plug.

A suitable earth ground must be connected to the ground lug located to the left of the terminal block.

Check all connections to terminal block for tightness.

Test electrical supply for voltage and amp draw while unit is filling water tank. Record readings on the INSTALLATION CHECKOUT form.

Upon completion of the electrical hook-up and testing, properly reinstall all panels.

CAUTION:

SHOCK HAZARD

Removal of any exterior panel will result in exposed electrical circuits. Electrical connection must be performed by a

qualified technician only. Use care whenever working around exposed electrical circuits.

IMPORTANT:

Contact a licensed electrician to install and connect electrical power to the dispenser.

IMPORTANT: Damage due to being connected to the wrong voltage or phase is NOT covered by warranty.

IMPORTANT:

Field wiring supply voltage must correspond to the position of red wire #11

(i.e. 208V or 240V). Failure to match wire #11 position to input voltage can result in equipment damage or reduced performance.

Such damage is not covered by warranty.

CAUTION:

SHOCK HAZARD

Failure to connect the chassis ground to a suitable earth ground will result in a potential shock hazard.

GROUND

NEMA 6-50P

Fig. 5 NEMA 6-50P Plug

WM-TR specifications

The Wells WM-TR is a commercial-grade, walk-in cooler and freezer unit designed to meet the needs of various businesses, from restaurants to grocery stores. Its robust construction and efficient design make it an essential component for maintaining perishable goods at optimal temperatures.

One of the standout features of the Wells WM-TR is its energy-efficient refrigeration system. Utilizing advanced technology, the unit operates with minimal energy consumption while ensuring that the internal temperature remains consistently cool. This not only helps businesses save on energy costs but also contributes to a more sustainable operation in a world increasingly focused on environmental responsibilities.

The unit boasts an all-stainless steel interior and exterior, providing exceptional durability and easy maintenance. This material is not only resistant to rust and corrosion but also easy to clean, making it ideal for food service environments where hygiene is a top priority. The unit is designed with rounded corners and smooth surfaces to minimize dirt buildup and facilitate regular cleaning routines.

Another critical characteristic of the Wells WM-TR is its adjustable shelving. The unit comes equipped with heavy-duty shelves that can be easily repositioned to accommodate different sizes of products, from small items like herbs and sauces to bulk supplies of meats and dairy products. This flexibility allows businesses to maximize their storage space efficiently.

The Wells WM-TR is also designed with user convenience in mind. It features a user-friendly digital thermostat for precise temperature control, allowing operators to set and monitor the internal conditions with ease. Additionally, LED interior lighting provides excellent visibility, ensuring that employees can quickly locate what they need, even in dimly lit environments.

Safety features, such as automatic door closure and a built-in alarm for temperature fluctuations, further enhance the unit's reliability. These features ensure that the integrity of stored products is maintained, reducing the risk of spoilage and associated losses.

Overall, the Wells WM-TR stands out as a top-tier solution for businesses looking for a dependable, efficient, and versatile refrigeration system. With its combination of advanced technologies, durable construction, and user-friendly features, it is an investment that supports operational efficiency while safeguarding the quality of perishable goods.