•This appliance is not intended for use by individuals (including children) with restricted physical, physio- logical or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used.
•Children should be supervised to ensure that they do not play with the appliance.
•Do not use an external timing switch or a separate remote control system to operate the appliance.
Operating elements
q Temperature LEDs w KEEP WARM button e ON / OFF switch
r SET TEMP button (Temperature adjustment) t Handle of the lid
(with subjacent lid opener)
yBase
u Cable winder i Pourer sieve
Commissioning
Important
Always and only use freshly drawn mains water in the kettle! Do not consume any water that is not certified as potable. If you do, you are taking
a risk with your health!
•Before using the appliance, check to ensure that ...
–the appliance, plug and power cable are in a faultfree condition and...
–the cable is completely unwound from the cable winder u under the base y and...
–the cable is guided through the recess on the base y and...
–all packaging materials have been removed
from the appliance.
•Fill the appliance with water up to the MAX marking on the scale and let it come to a full boil once – as described in the next section.
•Pour this water away after boiling it.
•Rinse the kettle with clean water.
•Fill the appliance once again with water up to the MAX marking on the scale and then bring it to the boil. Pour this water away also after boiling it.
The appliance is now ready for use.
Note
If there is no or not enough water in the kettle, then the appliance switches itself off automatically. Lift the kettle from the base y and fill it with water to take the appliance back into use.
- 3 -