Euro-Pro EP96W Slicing & Shredding Blades, French Fry Blade Assembly, Whipping Attachment

Fig. 25

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Slicing & Shredding Blades

CAUTION: Make sure that the unit is unplugged from the power source and the speed control dial is in the “OFF” position before inserting or removing attachments.

1.Place the blade of your choice on the blade holder. Inserting the longer tab on the side of the blade first. (Fig. 17)

2.Press the other end of the blade until it clicks into place. (Fig. 18)

3.Fit the processor bowl and spindle as detailed on the page 4.

4.Using the finger holes in the blade holder, fit it over the spindle and press firmly into place as indicated. (Fig. 19)

WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP.

5.Fit the lid and click into place as described in the Setting Up section (page 4).

6.Plug in the processor.

7.WARNING: USE THE FOOD PUSHER TO ADD FOOD INTO THE PROCESSOR BOWL

THROUGH THE FEEDER TUBE. Do not overload the food processor bowl. In one operation, you can process a maximum of 6 cups (1500 ml) of food.

Fig. 17 Fig. 18

Fig. 19

French Fry Blade Assembly

CAUTION: Make sure that the unit is unplugged from the power source and the speed control dial is in the “OFF” position before inserting or removing attachments.

Note: The French Fry Blade is already assembled to the blade holder. Do not try to remove it. (Fig. 20)

1.Fit the processor bowl and spindle as detailed previously.

2.Using the finger holes in the french fry blade holder, fit it over the spindle and press firmly into place as indicated.

(Fig. 21)

WARNING: USE EXTREME

CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP.

4.Fit the lid and click into place as indicated in Setting Up section (page 4).

5.Plug in the processor.

6.WARNING: USE THE FOOD PUSHER TO ADD FOOD INTO THE PROCESSOR BOWL THROUGH THE FEEDER TUBE.

Do not overload the bowl. In one operation, you can process a maximum 6 cups (1500 ml) of food.

Fig. 20 Fig. 21

FINE	THICK	FINE	COARSE
SLICING	SLICING	SHREDDING	SHREDDING
For fine slicing:	-	Recommended speed
		level is High
		(Cucumbers, raw
		potatoes, lettuce,
For coarse slicing: -		carrots)
		Recommended speed
		level is High
		(Cabbage, carrots,
For fine shredding:-		onions)
		Recommended speed
		level is High
		(Carrots, cucumbers,
		cabbage)

Whipping Attachment

CAUTION: Make sure that the unit is unplugged from the power source and the speed control dial is in the “OFF” position before inserting or removing attachments.

1.Fit the processor bowl and spindle as described previously on page 4.

2.Fit the whipping attachment over the spindle and press firmly into place. (Fig. 22)

3.Place the ingredients into the bowl.

4.Fit the lid and click into place as described in the “Setting Up” section (page 4).

5.Plug in the food processor.

6.Turn the food processor on selecting high speed.

7.Recommended speed for whipping is high.

8.Remove the whipping attachment from

the bowl before removing the whipped ingredients.

FOR SAFETY, ALWAYS LEAVE THE PUSHER IN PLACE WHILE OPERATING THE PROCESSOR.

Fig. 22

Note: When whipping thin liquids such as skim milk, use only 3 oz. of liquid at a time.

Juice Extractor

CAUTION: Make sure that the unit is unplugged from the power source and the speed control dial is in the “OFF” position before inserting or removing attachments.

1.	Fit the processor
	bowl as detailed
	previously
	(page 4). (Fig. 23)
2.	Fit the juice	Fig. 23
	extractor/filter into
	the processor bowl.
	(Fig. 24)

Juice Extractor (Cont.)

3.Fit the juice extractor lid over the extractor and rotate counter clockwise ensuring that the lid tab has clicked into place

4.Plug in processor.

5.Turn speed control to minimum (use only on

minimum speed).

6.Use the juice extractor pusher to add fruit into the food tube.

(Fig. 25)

7.If the juice extractor becomes clogged during use, turn the processor off and remove the juice extractor. The excess pulp can now easily be removed using the spatula.

Be sure to switch the appliance to the “OFF” position after each use. Make sure the motor stops completely and you unplug the unit before disassembling.

FOR SAFETY, ALWAYS USE THE PUSHER WHEN PUTTING FRUIT INTO THE FEEDER TUBE - NEVER FEED BY HAND.

Do not put your fingers or other objects into the juicer opening while it is operation. If food becomes lodged in the opening, use food pusher or another piece of fruit or vegetable to push it down. When this method of removing food lodged in the opening is not possible, turn the appliance off, unplug the unit and disassemble juicer to remove the remaining food.

7

For coarse shredding:- Recommended speed

level is High

(Lettuce, carrots,

apples)

Fig. 24

8